DIY FORMULA RIM SIM RACING

Подписаться 221 тыс.

Просмотров 917 тыс.

50% 1

How to build a DIY Formula rim for your sim racing simulator. The kit is running Simhub software.This build will give you some ideas on how to build your own DIY rims. Files available at amstudioprojec...
| Prerequisites |
Wiring • MAKE THIS BUTTON BOX |...
Displays TM1638 and 4.3" • DIGITAL DASH DISPLAY S...
Rev lights(optional) • MAKE ARDUINO RGB REV L...
Assign Buttons(optional) • HOW TO ASSIGN BUTTON B...
Parts
3 way toggle eBay ebay.us/yqA5a7
Push button ebay.us/PjNZbu
Encoders ebay.us/Wwq6nv
Suitable Encoder knobs ebay.us/gHGb4l
Carbon Vinyl ebay.us/ItSYEQ or BG bit.ly/2JhDwa8
Pro Micro bit.ly/3y2foQw
Solder BG goo.gl/Ni6n4P
Soldering iron goo.gl/Ahq8e2
Wire eBay 22awg ebay.us/aDR5Pq
Wire strippers goo.gl/4PFXny
Side cutters bit.ly/3OXj6mS
Suede Leather
Nextion Display 4.3" ebay.to/2U1ZvH7
USB to TTL Module bit.ly/3Q9AYvV
TM1638 - ebay.to/3br5qhe
Nano V3.0 bit.ly/3zsbjrB
USB Cable
Best Soldering Iron ebay.us/VIwU6k
This site contains affiliate links for which I may be compensated
My SIM Setup
Fanatec CSW 2.5 Wheel base
Fanatec BMW rim, Formula Rim, Universal Hub
Fanatec CS V3 Pedals
Fanatec Handbrake V1.5
Fanatec H pattern + Sequential Shifter V1.5
Fanatec Table clamps
Get Fanatec here:
www.fanatec.co...
Thank you for watching, all questions and feedback are welcome.
If you know someone interested in this Video please share it with them.
Check here for other Sim Racing, Mods and DIY projects.
/ @amstudioprojects
Copyright AMSTUDIO | All rights reserved amstudioprojec...
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License. creativecommon...

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 680

@Ashleylear 7 лет назад

How the hell could anyone dislike this video?! Oh wait, I know........sim wheel manufactures.

@vali69 6 лет назад

Or trolls

@doit1337 6 лет назад

@TotoDG 6 лет назад

82 of them? This is a bigger business than I thought…

@your_average_cultured_dude 5 лет назад

@@TotoDG every employee from every company xD

@massks6643 5 лет назад

How the hell could anyone dislike you?,Oh wait, I know........sim wheel manufactures.

@halfmaus 6 лет назад

we are living in 2017, meanwhile this guy is living in 3017

@basstrammel1322 6 лет назад

I'm just. You know, I can't, I'm more like a dude whos super excited when I manage to remap buttons on my wheel... This is some black belt DIY stuff!

@alexisvanloan6114 5 лет назад

Right!!! He handy as SHIT LOL

@vertatech4152 5 лет назад

Alexis Vanloan huh? the only person who can’t do shit is you. (besides making sandwiches)

@danpop1714 5 лет назад

@Dragos Frintura, its 2019 nearly 2020 n he is still there

@gileee 4 года назад

lol do you go on wood working channels and go "this guy can cut wood in STRAIGHT lines"

@evilhamsterzz 7 лет назад

HAHA I KNEW THIS VIDEO WOULD COME EVENTUALLY. Executed perfectly mate, top job

@zegreatclan 7 лет назад

Better than perfection, your DIY are outstanding !

@amstudioprojects 7 лет назад

Thanks! Simhub really brings these projects to life!

@TSEMoon 6 лет назад

Hi friends,1638 howti reverse display?thanks

@crossoff6098 Год назад

@@TSEMoon "Hi Friends"

@f1engineeringaddict 27 дней назад

@@amstudioprojects Which 3d printer do you use though for all of these sim videos. They are awesome!

@_-_-_-_-_-_-_-__- 7 лет назад

im making this great vid as always can you make a vid on how to make a steering wheel hub

@fns58 7 лет назад

+1 for the hub

@a.pashukkk8189 7 лет назад

Hub for logitech)

@McOzg 7 лет назад

fanatec +1 hub

@yoannbill8192 7 лет назад

Fanatec hub +1

@robinhilkert143 6 лет назад

A. Pashukkk yes pls

@mandziuc 7 лет назад

cool your project, but you did not show how you adapted in fanatec, you did not show the wires coming out of the steering wheel and that will probably mess up when it comes to playing and also when the steering wheel does the calibration, did you use a quick release? I liked the video but I still have a lot of information

@xXSgtJackXx 6 лет назад

Probably used a quick realease, but the wires come from the board inside the wheel where he soldered everything in, he just passed a usb through and used some programs that can be easily google ( that i dont know off) to map them

@sameezls 7 лет назад

Excellent project. I have been wanting to make an f1 wheel. Some off your project has inspired me to make my own. Thanks Mate.

@DaveSouthPhoto 6 лет назад

Thanks for including the part list. Will really help me with mine. Great vid.

@walterhernandez8623 6 лет назад

You're a genius! I could never build this

@mrpesqueras4703 7 лет назад

What an AMAZING job. Congrats and keep doing videos!!

@RvojDob 7 лет назад

Man you are good. thank you so much for this video

@Owl-ge9jl 6 лет назад

you, my sir, are a genius.

@rvcasa 4 года назад

3:26' if only there was a way to make more realistic round grips ;) Thanks for sharing

@david01flor35 3 года назад

they updated it

@Justsimracing 7 лет назад

Awesome!! So tempting to try!!

@mariohernandez5147 7 лет назад

Amazing video as always.

@skaylars 6 лет назад

I think it would be easier for people if it was a complete kit. With display, buttons etc..

@lukaslibar7615 6 лет назад

I made a simmilar one for my lawn mower engine go kart

@kwakhru435 5 лет назад

Cool Can you make a vid about it?

@Bonkikavo 7 лет назад

Do DIY load cell pedals. This is great btw.

@CYMotorsport 2 года назад

2:07 beyond triggered you didn't build a stand off for the promicro and it's just dangling amongst the rats nest haha

@andrewtsousis3130 6 месяцев назад

This is great, how do you end up with one USB output when there is both the pro micro and TTL? Do they both connect somehow?

@kswitch5870 7 лет назад

this is Gold

@mbchannel1037 7 лет назад

Can u please make Diy H-shifter for next video pleaseeee..?? Im kinda bored using sequential shifter and paddle shifter, bcus less challenging.

@dinxsy8069 7 лет назад

Biggest issue i had with this kit was the grips, the shape was a major problem having hands like king kong made it very uncomfortable during long sessions. Needs more refining.

@sepvanekeren8977 6 лет назад

Do you think I can make this, while I haven't got any experience with these kind of projects? And do you now if you can also add this wheel on to a thrustmaster base? Thanks a lot

@RickStuff 4 года назад

Hello. We can't see the nano V3.0 in your steering wheel. We can see the Pro Micro and the FTDI USB to TTL Serial Adapter Module so was the nano optional? Also at 2:06 when you close the back cover we can see that there is nothing connected to the USB to TTL module. Have you solder it directly at the Pro Micro and is so, what pin have you used? Thanks

@MiKE03 7 лет назад

i like your vids ! big like from me !

@febbyatigagaming 7 лет назад

This is awesome :wow:

@snoopergianotto 6 лет назад

Im doing this.. Could you specify bolts and nuts sizes? Great video, Thanks for sharing.

@pixel_xo 6 лет назад

Wow! Wonder if it could used in a car like the BAC Mono

@adnaandavis4529 4 года назад

Plzzzzzzz upload the plans for this to your website, I'll definitely buy it!!!!

@spaceknight4775 7 лет назад

YES finally :D

@mymonstercollection2247 4 года назад

Diy Wheel base is next I see it

@baoya6913 6 лет назад

can you make a diy hub, wheel, foot pedals, handbrake all in one go, i kinda can't afford a wheel base

@angle6326 2 года назад

Is it just me or who else is watching this in 2022

@jaqueslagerweij6882 29 дней назад

Dude im watching it in 2024😂

@ClassicCarGuy911 26 дней назад

@@jaqueslagerweij6882me too

@michelebosck4318 6 лет назад

hello amstudio, I thank you for your tutorials you do that for me are an example, but I wanted to ask you to make this steering wheel in addition to connecting everything etc .... there is no way to use a single board for things example rgb light, display, button? you use three board, but maybe there is one that makes for three, are you know? Or there is not that?

@MrValentex 6 лет назад

You must use two separate USB cables, right? One for arduino and the other for USB to ttl module.?

@Kungfujoe1110 7 лет назад

Cool video as always...but I clicked on that kit link expecting something that cost in the realm of $20. I was shocked to see how much they wanted for that diy kit that doesn't even include electrics. Thrustmaster makes an F1 rim...and it costs 25 euro more than that bag of plastic from 3drap.it. If you absolutely love doing DIY projects, then more power to you, but if you're like me and enjoy these videos because, while being fun projects, they also tend to be cheaper alternatives to retail hardware, this one doesn't seem like a win in my book.

@Michael-sb1tt 2 года назад

How is the screen powered? is it connected to the pro micro somehow, or do you have two usbs coming out of it?

@SourCandy436 6 лет назад

how do the buttons interface with the wheelbase? What is the connection?

@nickgalaxy8087 5 лет назад

Hey Amstudio i have a question ist it possible to sell like These 3d printed parts for them they cant afford a 3d printer :) Best regrates from germany

@Ghiorgo 6 лет назад

You can connect the screen and the buttons controller to a single USB output?

@coopermarino2355 4 года назад

How much did it cost to make? And where can I get the kit

@eduardofreitas8336 4 года назад

But how do you connect it to the wheel base??

@faisalero 7 лет назад

awesome work how did you attach the wheel to the fanatec hub ?

@hurribeats 7 лет назад

can u do a motion sim

@colinkramer36 7 лет назад

Ivan Brown i dont think he will do that, im building a motion sim right now and i am already 1 and a half year into the building proces, it just takes too long and too many things go wrong just for making 1 video

@Warfalcon 7 лет назад

Yeah but do you have a 3D printer? lol kidding :)

@unleasheddrivers1281 6 лет назад

Colin Kramer Would be keen on knowing costs involved in making a motion sim setup.

@MrSabifa 6 лет назад

Which buttons and button cover did you use for the two upper ones? The link in the description doesn't seem to be the right one. :)

@rudybertazzo 3 года назад

Is this connected to the base through the Podium Hub?

@p3rcepti0n39 7 лет назад

Early?,anyways,love ALL your vids because they're so cool!I can't do this myself,but it's cool seeing you do it!keep making AMAZING vids!

@davidestrada5563 3 года назад

The screen works on Xbox?

@laciindustriesandtechnolog7831 3 года назад

Why are you playing a GT4 game with a F1 steering wheel bud? Anyway I built this wheel and it works great so thanks!

@EnderTNT_123 3 года назад

Does it works on ps4?

@CarsGeek1 6 лет назад

Like bro!!!

@stevenw9993 7 лет назад

How did you connect the steering wheel to the wheel base?

@jamesmuffins3330 7 лет назад

Universal Hub

@stevenw9993 7 лет назад

Ah oke, Thank you.

@golge3276 4 года назад

Does it worked in thrustmaster t150?

@bbc6rgf57ytty5yxyw5gt 7 лет назад

Amazing video. I'd love to see a DIY H shifter video sometime.

@samk7738 5 лет назад

check out his channel, he has one

@theothergtgeek9407 5 лет назад

@@samk7738 at the time there wasnt

@1312_PV 4 года назад

@@theothergtgeek9407 And there souldn't be today either, he copied the design without mentioning the original owner.

@Paul-ni4fs 4 года назад

Roberto he showed and mentioned where he got it from and from who from it was,didnt he?

@1312_PV 4 года назад

@@Paul-ni4fs Not the original creator and also profiting off it...

@monsters4846 6 лет назад

Hello! Thanks for your works! How to conect the arduino and the screen module? Two usb wires? You miss this part at vídeo. Thanks for all!

@sweetrichomes9048 5 месяцев назад

La mas importante diría yo

@scalyshooter3033 7 лет назад

These projects amaze me more and more each time, I have only been able to make the handbrake you designed myself but still think the videos are awesome!!

@amstudioprojects 7 лет назад

Thanks Stephen!

@Simlife101 5 лет назад

@@amstudioprojects can I ask where was the detail on how you wired the screen when you put the back plate on it doesnt look connected to anything. I'm stuck at this part. do I need 2 usb leads coming out one gojng to to the screen to power and display and the 2nd one for the buttons and shifters?

@Simlife101 5 лет назад

@@amstudioprojects at 2:07 I cant see how I need to wire the screen so theres only one usb lead coming from the wheel (that's if it's designed to only have one usb lead)?

@Simlife101 5 лет назад

amstudio ow I see lol you wired the screen to the board I got it but is there a video you can link me where you show how to wire the screen to board

@crossoff6098 Год назад

@@Simlife101 Guy left the chat

@javiermj9010 4 года назад

Do you use 2 USB, one for the lcd and one for the arduino? If not, how do you connect the USB to TTL module with the arduino?

@danpop1714 3 года назад

this.

@Michael-sb1tt 2 года назад

I would like to know the answer to that question as well

@javiermj9010 2 года назад

I almost have my steering wheel project completed and I got it working with only one USB connected to the steering wheel, I used a USB HUB inside the steering wheel.

@marcclark4156 2 года назад

@@javiermj9010 can you tell me how to do this? Do you have Instagram or reddit?

@zkaze9 2 года назад

hey bro, do u have ino file for andruino ?

@FunniNut 6 лет назад

Kimi now has his steering wheel

@nitrozeus8231 3 года назад

ay steering wheel someone tell to give it to me come on move!

@janamshah414 2 года назад

Hey! I wanted to ask if I could use a usb joystick encoder for the buttons and something else for the display separately and connect both the wires to the pc, would it work?

@Og_banana 2 года назад

Can you make one with clutch paddles too

@piotrgancewski6736 4 года назад

Fanatec has left the chat

@eliasnaranjo9179 6 лет назад

This is a great project, but like everyone else, I want to kno how it is connected and works with your fanatec wheel base.

@VascoG1 4 года назад

Hi, great job!!!😱🥶 Do this works with ps4??

@erinslacroixreviews9743 6 лет назад

How do you wire the screen and the buttons so they’re a only 1 cord going to the computer?

@haydenpearce4455 2 года назад

hey i have a question is this wheel compatible with Logitech g920 to be added on. Thanks

@quintenvermeulen4576 7 лет назад

Another great project. I'll be building an F1 wheel that I designed myself very soon, and luckily I now know how to wrap the handles in suede. Thanks for the great videos mate!

@neilcoelho 2 года назад

Everything cool except soaking the suede in water. Rather just use steam to do it. This way it does not spoil the tan and not drain it out.

@BurningBroadcast 7 лет назад

Mate I'll definitely toss you some money over at Patreon , you inspired me to buy a 3D Printer and start doing more DIY. By now you must have saved me over 300 $ by making my own 3d sim-racing hardware. Seems like this will be the next project. I am wondering though, do you run the display and buttons off the same Arduino? If so how does it interface with the Simhub software in real time while also being a button emulator? And lastly, I noticed the kit doesn't include any micro-switches for the paddles, are these microswitches they use the same ones you used in your paddle shifter video? Cheers.

@amstudioprojects 7 лет назад

Awesome mate, glad the content has been useful and inspired your creativity!

@BoneyardShadow 7 лет назад

im not sure you can 3d print with materials that are sufficiently mechanically resistent to handle the forces of the force feedback motor, or you will need to lower those forces. Also great content amstudio, kudos. i'm wondering how did you attach the wheel to the quick release mount, and where did you get one

@BurningBroadcast 7 лет назад

No , wasnt implying you could 3d print this, I just got a printer based on amstudio's video's. You could probably 3d print it for weaker wheelbases like TMX/ T150 and G25/G27/G29. T300 maybe ,but if you run TS-PC or CSW or OSW etc definitely not. As for QR, there is a Fanatec to 70mm adapter on Thingyverse. I assume one can use that flipped, so the 70mm part on the wheel, fanatec on the base.

@BoneyardShadow 7 лет назад

i undestand what you meant by the 3d printed part. there are also t300 adapters for standard aftermarket wheels, and ssome of them are 3d printers

@d3l4davidr.72 6 лет назад

I am wondering about the same thing. I bought the Wheel today and since then im thinking about how to wire all things up. Do you already have a Solution?

@fropel88 3 года назад

Does this display work with playstation 4? For F1 2020 for example?

@walkie4166 6 лет назад

How did you get the metal plate? There is a 1:1 formula rim template?

@onufmi 5 лет назад

i need to know too. :D metal plate and 3D printed parts are not mentioned in the part list in the description. im guessing he designed and printed 3D parts himself. And that metal plate.. I know you can find companies that will laser cut you any shape but it will be nice to have same source as him.

@your_average_cultured_dude 5 лет назад

Buy a sheet of aluminum and trace the outline of it. Then use a jigsaw with a metal cutting blade

@moisestovar5479 7 лет назад

Sure

@magzire 6 лет назад

Moisés Tovar lol easy

@Og_banana 2 года назад

Can you please make a diy redbull f1 wheel (trying to make one myself)

@emersonmarques1174 5 лет назад

From the video it looks that only one usb cable comes from inside the wheel, but inside there are 2 devices that need usb( the Promicro and the FT232RL USB to TTL module) how didi you managed that ? you puted a passive hub inside?

@emersonmarques1174 5 лет назад

Im building this

@RickStuff 4 года назад

Hello. @@emersonmarques1174 I wounder the same thing. Where the USB to TTL module is connected???. at 2:06 when he close the back cover the USB to TTL module is still not connected. I wounder if he soldered it to the Pro Micro somewhere but we can't see. and apparently he doesn't reply to comments...

@Odysseus38 2 года назад

Wtf.....i know what im spending my days on haha....i just need a 3d printer haha

@hanilainepe8503 3 года назад

Hey Fanatec, Logitech, Thrustmaster, you listening to this guy?

@luizfelipegaio17 4 года назад

Its super cool, but its not affordable for everyone diy...

@giovanitestoni5160 5 лет назад

Dude, I would like to make a wheel like this. How can I get the complete project with all the necessary information?

@КостаСтојановић-о8х 5 лет назад

Its a 3d rap kit.

@walker9977 5 лет назад

Which sketch did you use for Arduino? The one used for the button box?

@MrHamster1982 6 лет назад

Do you also solder the LCD arunido to the buttons encoder as well? Or do you connect 2 USB cable?

@flatoutportugal 6 лет назад

Very good job men, you make a lot of nice things for sim racing, i realy like your channer ist very useful for me.. continue bro good job

@amstudioprojects 6 лет назад

Thanks!

@samumate9580 4 года назад

OMG dude, im crying. So he built a pretty cool formula steering wheel... To drive GT cars. 😐

@osco5191 4 года назад

Gt Car pretty much have the same wheel

@gamingxprox124 4 года назад

GT wheels are pretty much the same Look at the Fanatic McLaren GT wheel What does it look like also

@_im.Mike0 6 лет назад

hello, i'm italian and i love your videos, i make all your creations, i need help to make this wheel. Can you help me or give me 3d files?

@limpanskok 7 лет назад

Okay, then it will be time to build a sim again RU-vid crashes my banking account ..... ....... ``Great channel´´ ....

@toasti_chess Год назад

Ok now all I need is the materials and a gaming setup

@LordKaos666 6 лет назад

After this video I MUST remake my old force feedback wheel...I need to play more car race games! (...and but another video card :( )

@fuelledbyink.7557 7 лет назад

I genuinely love all of your content, I'm subscribed on all 4 of my channels so I never miss a new video. Please never quit youtube. Also will you be doing video on what your everyday racing setup is at home? That would be great for us viewers! Upvote this so he can see please?

@kcs4212 6 лет назад

great vid. tip for the handles. first use memory foam to the handles and then attach alcantara or suedine, it gives u more 'full' grip

@Brandts1 6 лет назад

Can you use that wheel on f1 2017 on PS4?

@glazegloves1919 7 лет назад

Can you make something for the Xbox ?

@jamesmuffins3330 7 лет назад

GLAZE Y TIZON RA This should work with the Xbox with Xbox compatable base

@jeremiedumas8555 5 лет назад

Some of the items aren't avaible anymore... Would you like to update it? Plus, how do you make your screen working with the game? How do you connect the wheel and the wiring to the rest of it? Great video but I would like some more informations! Thanks!

@Simlife101 5 лет назад

Jeremie Dumas usb to something Called Adrino board and uses Software called simhub Which is free For the display. You can even use a tablet or mobile phone for simhub. Look on RU-vid for how to use your smart device as a sim display, That is what I am doing at the moment. Hope that helps you

@LukasD89 7 лет назад

Thanks a lot, fantastic work. I'd love to have a custom Porsche 919 rim to be honest..

@jamesmuffins3330 7 лет назад

Lukas Wirtz Get the rim and attach it to the Fanatec Universal Hub

@LukasD89 6 лет назад

which rim though :P

@zeuchoa 4 года назад

do you sell these babies?wondering if you could build one of these and I'd buy it. (logitech g27 base)

@kvnvth8166 7 лет назад

Can you make a new Video about the nextion Displays, because in the new simhub setup isn't a nextion folder

@caspartownend5516 5 лет назад

How to u get the metal wheel cut out????

@antoniojesusromero5067 7 лет назад

Im a spanish boy and anyone in Spain do this type of videos with this quality. Can you make a video of doing pedals?

@laurasfar18 7 лет назад

Im planning to build a box out of mdf and carbonfoil front, with a slide-in tablet as second infodisplay. under the tablet i'll attach a missilestyle on/off power switch with red an green led lamps next to it, to indicate if the wheel has power or not. ...And then i see this video and suddenly feels like a 6 yearold trying to build a fancy castle with two chairs and a blanket. Great video !!!!

@Kay-br7by 11 месяцев назад

Can you drive with this steering wheel in a real GT/formula car assuming you build this as a personal project?

@badwolvesesport2463 5 лет назад

Hy guy how many cable have this rim? two cable or one? ine cable for button and one cable for display?!?or use on cable for all...You use one cable please help me for use.Thank

@Dziukens 4 года назад

Is this wheel compatible with Thrustmaster T300RS GT?

@_Boni_ 4 года назад

The funny thing is that the original Formula steering wheel is made the same way! Except the material are different.

@godvsevolutionmythgodvsevo1038 4 года назад

Wow nice mod , hey is the LCD mod capable of doing live track map display both on steering and display the map in a sim hub form in game thanks in advance.