DIY Hanging Storage Shelves with Sliding Doors - Overhead Garage Storage

Подписаться 74 тыс.

Просмотров 99 тыс.

0% 0

These overhead hanging storage shelves hide the mess with sliding doors! These are easy to make, require minimal tools, and are made with material that you can get from any big box store.
Apparel: teespring.com/stores/penaltyb...
Instagram: / penaltyboxwoodshop
Website: www.penaltyboxwoodshop.com/
List of all my tools: www.penaltyboxwoodshop.com/tools
List of tools used in this build:
Makita Track Saw: amzn.to/35pw8o4
Bosch Drill and Driver: amzn.to/3d5tBSs
Delta Table Saw: amzn.to/3fagBNz
Bessey Clamps: amzn.to/2Ysm0cQ
Forstner Bit Set: amzn.to/2tQ0WzL
Dewalt Planer: amzn.to/2s0DkYm
Delta Miter Saw: amzn.to/2N24Psw
Canon T6i DSLR: amzn.to/2EgiiHx
Rode VideoMic Microphone: amzn.to/2ZY0hve
Canon EF 28-135mm f/3 Zoom Lens: amzn.to/2H1HaWw
Video Tags:
DIY Hanging Storage Shelves with Sliding Doors - Overhead Garage Storage, DIY Hanging Storage Shelves with Sliding Doors, Overhead Garage Storage, Penaltybox Woodshop, maximize your storage, storage solutions, diy storage solution, garage storage, garage storage ideas, garage storage shelves, garage storage racks

Хобби

Опубликовано:

2 май 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 123

@AnotherSideCharacter 2 года назад

Bro! I ain’t gonna lie but this was probably the most easiest how too and diy wood crafting video for me to understand. Great video it really helped me visualize another way to make a carcass

@PenaltyBoxWoodshop 2 года назад

Awesome! Glad it was helpful

@billy.bright 3 года назад

This is exactly what I was looking for. I want everything in my garage concealed. No open shelving where things collect dust. But the best thing about this design is that with price of wood being so high right now this design will save you money over building regular style cabinets. Good job!

@PenaltyBoxWoodshop 3 года назад

Thanks Billy! I appreciate that!!!

@christiansouder9977 Год назад

Amazing video. I wish I saw this sooner. Thanks for the DIY insight!

@rkerby6375 4 года назад

Amazing! Thank you for this super cool build!

@PenaltyBoxWoodshop 4 года назад

Thanks Robert! Glad you enjoyed it!

@cwhitmore88 2 года назад

Thanks for creating this video. I was looking for some storage ideas in a nook in my garage. I followed your video and got it installed in a few days. I will say that when I was cutting the dados my saw ran into a knot which messed up my cut so I just flipped the board over and cut the other side. Worked out well. Much appreciated!

@PenaltyBoxWoodshop 2 года назад

Heck yeah! Glad it was helpful and you got some extra storage now!!!

@richragan4810 4 года назад

Great idea Jess. I always learn something from your videos. Peace!

@PenaltyBoxWoodshop 4 года назад

Thank you so much! I appreciate your support and Im glad we can all learn something from one another!

@protect.your.digits.creations 4 года назад

Great video and instructions . Keep up the great work .. Stay well to your family and you .🙏🖐

@PenaltyBoxWoodshop 4 года назад

Thanks friend! I appreciate your support as always!

@TheWeekendDIYer 4 года назад

Very clever build! Great use of space!

@PenaltyBoxWoodshop 4 года назад

Thanks friend! 👊👊👊

@FennahMakes 4 года назад

What a great way to create extra storage!!

@PenaltyBoxWoodshop 4 года назад

Thanks! It’s been a game changer!!!

@georgevalenzuela2489 2 года назад

Nicely done!

@PenaltyBoxWoodshop 2 года назад

Thanks!

@FredMcIntyre 4 года назад

Awesome job! 😃👍🏻👊🏻

@PenaltyBoxWoodshop 4 года назад

Thanks Fred! It added some much needed storage

@mrdelightfulmint2035 3 года назад

Great job and video!

@PenaltyBoxWoodshop 3 года назад

Thank you, sir!

@edymoss3466 4 года назад

Thanks for the great video Gave me some great ideas for building some storage cabinets for my small basement workshop All out of a couple of 2x4s and some cheap plywood Thanks again and keep well

@PenaltyBoxWoodshop 4 года назад

Thanks Edy and thanks for your support!!!

@scottfiegehen5014 3 года назад

Great job!

@PenaltyBoxWoodshop 3 года назад

Thank you!!!

@randykissoon1845 3 года назад

Awesome video!!

@PenaltyBoxWoodshop 3 года назад

Thanks man!

@aledzbuilders 2 года назад

Nice. Perfect for my project

@PenaltyBoxWoodshop 2 года назад

👊👊👊👊

@uncabro 2 года назад

so smart way to mount it, thank you sir

@PenaltyBoxWoodshop 2 года назад

Thanks!!!

@travismchance 3 года назад

Excellent video & gives garage shelving a super clean look. Will be doing the same; Thanks!

@PenaltyBoxWoodshop 3 года назад

Thanks! I really like the idea of the doors and being able to hide all my junk haha

@travismchance 3 года назад

@@PenaltyBoxWoodshop Yeah, me too. By far the best garage shelving I've seen so far. Well done.

@PenaltyBoxWoodshop 3 года назад

I really appreciate that

@tinywoodshop5491 4 года назад

Pretty cool!

@PenaltyBoxWoodshop 4 года назад

Thanks! Be perfect for a tiny woodshop! 😁😉

@twotopsturning6493 4 года назад

It looks like you put alot of thought into how to put that together. And it came together nicely 👍

@PenaltyBoxWoodshop 4 года назад

Thank you! Yea I have been thinking about this one for a while and wanted to do it right.

@twotopsturning6493 4 года назад

@@PenaltyBoxWoodshop for sure! Anytime your working on a ladder, a little extra thought pays dividends

@PenaltyBoxWoodshop 4 года назад

Two Tops Turning so true!

@thomastittlemier2104 4 года назад

Nice build

@PenaltyBoxWoodshop 4 года назад

Thank you!

@cheryltaylor1322 3 года назад

I wish u built mine, love ur work!

@PenaltyBoxWoodshop 3 года назад

Thanks!!!!

@AbhikarnSingh01JN 3 года назад

GOOD JOB

@PenaltyBoxWoodshop 3 года назад

Thanks!

@jitendrudu 3 года назад

I used your design with another one I made, result is g8 for our needs.

@PenaltyBoxWoodshop 3 года назад

Awesome!!! Thanks man!

@user-nr9oj6fl9p 3 года назад

نپرطغشبنلسقنرسعدیبغن

@engieerslider8117 6 месяцев назад

Good job, I might try that. I think I can do all but the sliding doors. I'm sure you've had plenty of practice.

@georgeramos3632 Год назад

Better hope the garage door tension spring doesn’t need replacement……you’ll have to remove the cabinets…

@rickbach5707 Год назад

Great build, going to use your concepts for our garage as well. Have watched your video and gone through the description and comments but you stated 1/2 plywood in the beginning, and 3/4 when screwing down the base. I am guessing 1/2 because you have 1/2 inch datos for the door fronts and it would then be level. Just wanted to confirm. Thanks!

@keyshey Год назад

Nice and easy instructions! Thanks! How much weight do you think this can handle? I'm hoping to build one for storage but at the same time to hang my bikes underneath it with a railing and some hooks.

@mikesimmons7539 4 года назад

Very nice , great job . Ever built a flip top tool cart ?

@PenaltyBoxWoodshop 4 года назад

Thanks! No, I have dove into one of those yet.

11 месяцев назад

Thanks for your sharing, I would like to ask what kind of screws/fasteners you are using (are they grk?) since I saw you rarely use clamp to tighten the woods. Thanks

@alfredtorres2724 2 года назад

I really enjoy all your to do videos but I have a question about your above garage shelves but in my garage I have cinder blocks above my garage door any suggestions on how I can do the shelves

@jeffforbes3772 4 года назад

Very cool and timely. We just moved and I'm needing extra storage in the garage and was thinking along these lines. Are you concerned that the doors may bind due to expansion of the 2x4's and skewing those grooves? Thanks for posting.

@PenaltyBoxWoodshop 4 года назад

Thanks man! I made sure that the dados were pretty wide for the 1/4” ply to have room. I’m not overly concerned with as much room as they have.

@seancraig7883 2 года назад

Excellent. What amount of weight seems safe? I have a garage with exceptionally high ceiling and am curious know if there’s a rating for lbs per sq for of space hanging from the ceiling , will it make a difference if the ceiling to my garage is the floor to second story ?

@markfutato7547 4 года назад

Great video. I want to reproduce this for storing drying logs. I am out of space.

@PenaltyBoxWoodshop 4 года назад

That’s a great use for it! Thanks!

@zacksgaragedoorserviceandr1208 4 года назад

Very good job on how you install everything just to let you know I do garage door motor so just let you know your emergency release rope and handle it is tied off wrong so if you want to fix that that will be good I can’t tell if the handle is upside down or not so make sure you get that fixed and put the proper knot On it normally a half hitch on each end of the rope is perfect and if it’s too long cut it burn the end of the rope and put 1/2 hitch knot on it and it will look good

@PenaltyBoxWoodshop 4 года назад

Thanks Zach and I’ll definitely take a look at that! 👊👊👊

@cohens1002ify 2 месяца назад

Looking to do the same thing. Enjoyed the video, however, looking for shelves that are two-tier with the sliding doors.

@Meme-zc4cw Год назад

Would using lags to attach the 2x4 to the roof substantially increase the holding power?

@jeaninepayne9303 6 месяцев назад

Great video. Someone mentioned a concern about potential repair on your garage door spring. Would those cabinets need to come down if that happened? Only ask cuz my garage door just had that happen and it was right before a rainstorm that the door got stuck open! Also, what nail gun were you using?

@joshargabright9484 Год назад

Did you use structural screws to hand the ledger board and overhead board? I was hoping to see a lag bolt instead of 3” screws. Nice work though.

@alexandergavrilov2566 3 года назад

This looks awesome! I'm thinking of doing the same, but also doing same kind of shelving along the walls of the garage top to bottom. It would have to be a lot shallower (probably about 20 inches) so the cars can still be parked, with overhanging top part. What do you think?

@PenaltyBoxWoodshop 3 года назад

Yeah man, should work great! These added a ton of storage!

@YungKiu9062 2 года назад

If you need to replace the garage door spindle spring in the future, you will know that this space is not suitable for use.

@TheMindverse 2 года назад

These look absolutely perfect for what I want. Most other shelving is far to shallow, these look nice and deep. I know anything can be customized, but are there dimensions available as a starting point for a beginning/intermediate guy like me?

@PenaltyBoxWoodshop 2 года назад

Man, off the top of my head I don’t remember dimensions. Check the description to see if I put anything down there

@blake4073 2 года назад

Really nice work. Curious if you need to have any components of your garage door removed and repaired is there enough room to do so?

@LifenaDay525 Год назад

Was wanting to know the same thing as all garage doors are not made the exact same size.

@bloop6812 11 месяцев назад

Question Sir what type of screws were you using, torx head deck screws or what eould you recommend Thanks for your response.😊

@OldGuyWoodworks 4 года назад

Having more storage is always nice. I need your email. Shirt is coming.

@PenaltyBoxWoodshop 4 года назад

Oh man! That would be awesome! Penaltyboxwoodshop@gmail.com

@OldGuyWoodworks 4 года назад

@@PenaltyBoxWoodshop I sent an email. Let me know if you got it.

@MrGeroth 4 года назад

Good job, but had you given any thought to lighting? I did the same thing down both sides, as well as the front. I didn’t have enough room over the doors.

@PenaltyBoxWoodshop 4 года назад

It did darken some areas on that side of the shop. I’m thinking of finding something simple (maybe even battery operated LED’s) to hang under them. Great question because it’s something to definitely consider

@familystupakis229 2 года назад

Thanks for sharing and nicely done…although not sure why you use the large wood dimensions. It’s completely overbuilt. Why not 2X2’s, 1/2” plywood, 1”X4” trim pieces (or 1X6 instead of 2x6 on the side)…etc? What you built can probably handle 10+ times the weight of what you would ever put there. Having said that - thanks again for sharing!

@stat11 9 месяцев назад

Great video. I believe I am going to work off of your design. I went to your website and the step by step tutorial isn’t listed on your site. Could you help me out with that?

@glennwalsh5636 Год назад

What wood do Japanese use?

@pithaughn 3 года назад

Hi. I'll be happy if mine are half as nice. What did you end up storing,

@PenaltyBoxWoodshop 3 года назад

Everything! Hahaha all my hunting and fishing gear mostly

@garrettgiuffre5653 2 года назад

Did you burn them in or did you pre-drill the screw holes

@PenaltyBoxWoodshop 2 года назад

Burned them in!

@cheryltaylor1322 3 года назад

Hi, can u tell me what measuring angle u used to measure ur 1/4, 1/4, 1/4? Thank you

@PenaltyBoxWoodshop 3 года назад

I think it was a woodpeckers delve square

@billballeza377 3 года назад

What do figure these shelves will hold weight wise?

@PenaltyBoxWoodshop 3 года назад

I would have no idea. I haven’t heard of any failure stories though

@michaeljenkins5421 2 года назад

Do you have a list of materials you use

@PenaltyBoxWoodshop 2 года назад

Should be in the description section

@alexandergavrilov2566 3 года назад

Sorry, one more question - you could've also used a router to cut the grooves for the sliding doors, right? (Not a woodworker, sorry!)

@PenaltyBoxWoodshop 3 года назад

Yes sir!

@alexandergavrilov2566 3 года назад

Did you not want to bother with the little bit of space in between the shelves? Seems like you could've built a short one in-between above the garage door opener rod, no?

@danieleickenhorst6545 3 года назад

Which pocket hole jig were you using?

@PenaltyBoxWoodshop 3 года назад

That’s the armor tool one. It’s pretty good for beginners but after a while you will want to upgrade to the K-2 Kreg

@danieleickenhorst6545 3 года назад

@@PenaltyBoxWoodshop Awesome, thanks for the quick reply.

@PenaltyBoxWoodshop 3 года назад

Daniel Eickenhorst any time!

@jacobkirby6493 2 года назад

I can dig it brother-man!!! A set of blue-prints and I can build it!!! When it comes to finish carpentry, not so confident!!! Of course I know how to do house-trim but I'm lost as a whore in church when it comes to building cabinet's. Got me a router table recently and now I'm out to learn how to operate this baby, Correctly!!! Lol. I know just enough to get somebody hurt. But I got Dove-tails on my mind !!! Lol

@PenaltyBoxWoodshop 2 года назад

😂👊👍👍

@dionnefowler7545 4 года назад

Can something like this be used in an apartment ?

@PenaltyBoxWoodshop 4 года назад

This is a pretty open question is there a specific concern or question about how they would work? Would the complex allow it?

@dionnefowler7545 4 года назад

@@PenaltyBoxWoodshop I was wondering if I could built something like this in an apartment. Im worried about it being able to hold up when building it into sheet rock or would something like this be too heavy.

@mule666 3 года назад

@@dionnefowler7545 it will be fine

@PenaltyBoxWoodshop 3 года назад

As long as you put them in studs

@rafb145 2 года назад

at <a href="#" class="seekto" data-time="122">2:02</a> - you're so lucky you didn't get a splinter under your nail

@yurakovalec7292 Год назад

Woodglut is nice for that.

@ahmadjahan4213 2 года назад

With all these tools? DIY?

@michaeljenkins5421 2 года назад

I see a list of tools but no list of materials

@PenaltyBoxWoodshop 2 года назад

Gotcha, I’ll take a look tonight and see what’s up

@RichardRecupero 3 года назад

Awesome but all I thought about was. I would build that thing on the ground.

@PenaltyBoxWoodshop 3 года назад

😂 Fair enough but the point is to have storage without taking up floor space

@capti443 3 года назад

Building it on the ground would make it easier in assembly, but it would be a bear to lift the finished cabinets up to the ceiling and snake it above the garage door rails. IMO, building it in place is the way to go, but think through sub-assemblies.

@edjohns256 3 года назад

Hey Jesse, enjoyed your youtube video on DIY hanging storage shelves. I have a particular question for you. Can you send your email address. I have a .pdf file to share with you. Ed

@PenaltyBoxWoodshop 3 года назад

Hey Ed, thanks! Penaltyboxwoodshop@gmail.com