Тёмный

DIY How to Build a SHED from Start to Finish (FREE Framing Plans!) 

Andrew Thron Improvements
Подписаться 289 тыс.
Просмотров 732 тыс.
50% 1

Learn How to Build this Shed with my FREE Framing Plan ⬇️
atimprovements...
For even more info, check out my "Build a Shed from Start to Finish" Ebook (Also FREE) ⬇️
atimprovements...
Last Summer, I Built a DIY Modern Shed from Start to Finish. This video will show you How to Build a Shed Foundation, How to Frame Shed Walls, How to install Shed Siding, How to install Asphalt Shingles on a Shed Roof, How to Install a Roll Up Door, How to install a Shed Window, and much, much more! This video covers the entire DIY Shed Building Process from Start to Finish. It is very detailed, so feel free to skip around the video as needed to specific sections of the shed build.
Building a Shed is a project that almost anyone can tackle with a little bit of knowledge and hard work. This video, along with my Free Modern Shed Building Ebook, will show you everything you need to know!
🛠 🧰 TOOLS AND MATERIALS USED TO BUILD THIS SHED
Air Compressor: amzn.to/34TatJf
Framing Nailer: amzn.to/3JGpBYU
Roofing Nailer: amzn.to/3BEAuYF
Roofing Mastic: amzn.to/3ePgBqK
Orbital Sander: amzn.to/34UwlUD
Bar Clamps: amzn.to/3JjFrJe
Carbide Tipped Drill Bit: amzn.to/3S0hdIM
Tapcon Screws: amzn.to/3OxEWxh
Drill: amzn.to/3JICKkk
Tape Measure: amzn.to/3HaTWgE
Circular Saw: amzn.to/3BFotC4
Masonry Drill: amzn.to/36yP1JW
Level: amzn.to/3HowUDn
Hammer: amzn.to/35fIpiT
Chalk Line: amzn.to/3MwSDg8
Clamps: amzn.to/3HLqwpK
Drill: amzn.to/3JICKkk
Sawzall: amzn.to/3HcdeSI
Circular Saw: amzn.to/3BFotC4
Jig saw: amzn.to/3I6lcyd
MATERIALS:
Shed Windows: amzn.to/3MUmgIF
Side Lights: amzn.to/3EY9fvP
Decorative Front Lights: amzn.to/3SoQ6X1
Overhead LED Bay Light: amzn.to/3ShAWmp
Acrylic Window Panels: amzn.to/3W0Iayj
Roll Up Door - See Roll Up Door RU-vid Video Below
🎥 Below are the other detailed videos in my Modern Shed Build Series:
Introduction to the Modern Shed Series: • I Transformed my Shed ...
DIY Full Shed Build Time Lapse Video: • I Built the World's NI...
Shed Foundation Options: • Shed Foundation Option...
How to Frame a Shed Floor: • How to Build a Shed Fl...
How to Frame Shed Walls: • How to Frame Shed Wall...
How to Frame a Shed Roof: • DIY Shed Roof Framing ...
How to Install Shed Siding: • How to Install Shed Si...
Shed Sheathing: • Shed Sheathing Install...
Shed Trim: • How to Install Shed Tr...
Inexpensive Shed Window Option (Acrylic): • Inexpensive Shed Windo...
Shed Window Install: • How to Install a Shed ...
Shed Siding Veneer: • LVP Flooring as Shed S... Roll-Up Door: • How to Install a Roll ...
How to Build a Shed Ramp: • How to Build a Simple ...
How to install asphalt shingles on a shed roof: • How to Install Asphalt...
How to Add Electricity to a Shed: • Shed Electrical Instal...
Shed Organization: • Shed and Garage Storag...
Shed Floor Epoxy: • Epoxy Floor Coating Ov...
If you want to learn how to build the EXACT shed shown in the video, I put together "The Modern Shed Build Course" (bit.ly/3PeKr4V) which includes a materials list🧱, tools list 🛠, and cut list 🪚for each step of the entire shed build process. Basically, this course makes it feel like you built this shed alongside me!
Follow me on Instagram: / atimproveme. .
I post a ton of DIY Reels and other Home Improvement Content Daily!
Subscribe to my RU-vid Channel ⬇️ / andrewthron. .
🎥 MY RU-vid GEAR
Camera (Iphone Max): amzn.to/3d5HxSo
Microphone 1(Maono Condenser Mic): amzn.to/3RCAb7N
Microphone 2 (Snyco G2 Lavalier): amzn.to/3Td3y1m
Tripod: amzn.to/3Rz5Gj3
Be sure to subscribe and hit the notification bell so you don't miss any Future Videos!
Video Chapters:
0:00:00 Introduction
0:00:34 Time Lapse of the Entire Shed Building Process
0:10:06 Shed Foundation Options
0:16:47 How to Build the Shed Base Frame
0:25:37 How to Frame Shed Walls
0:57:39 How to Frame a Lean To Shed Roof
1:21:38 How to Install Shed Siding (T1-11 or LP SmarSide Siding)
1:29:40 How to Install Plywood Shed Sheathing
1:36:56 Shed Trim Installation
1:44:52 Installing Siding Veneer
1:50:16 How to Install Shed Windows
1:58:46 Acrylic Panel Windows on the Front of Shed
2:06:07 Roll Up Door Installation
2:14:29 Asphalt Shingle Installation
2:32:25 Shed Ramp
2:40:24 Adding Electricity to Shed
2:52:05 How to Organize your Shed
3:01:30 Epoxy Floor Coating
3:21:56 Conclusion
*Content on the Andrew Thron Improvements RU-vid channel reflects my own opinions. Please seek out guidance of professionally trained and licensed individuals before making any decisions. Links in description may be affiliate links.

Опубликовано:

 

17 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 173   
@hominhtrang9531
@hominhtrang9531 9 месяцев назад
This video is an invaluable resource for anyone looking to embark on their own shed-building project, with the end result being a testament to what can be achieved with dedication and guidance.
@Gilbert-ke7tg
@Gilbert-ke7tg 8 месяцев назад
P
@AndrewThronImprovements
@AndrewThronImprovements 8 месяцев назад
I really appreciate it and I am glad it is helpful!
@CarolineLamb-dh9gf
@CarolineLamb-dh9gf 8 месяцев назад
If you've been contemplating building a shed but felt overwhelmed, this video is a game-changer. The host takes you through the entire process, making it easy to understand, even for beginners. The free framing plans they provide are like the secret sauce that makes the whole DIY shed project stress-free and successful.
@AndrewThronImprovements
@AndrewThronImprovements 7 месяцев назад
I appreciate you saying this! Thanks for watching and for the support!
@ExCordeEnt
@ExCordeEnt Год назад
Watching your timelapse alone is inspiring. I really hate the idea of a prebuilt shed, mostly because of how limiting it is. Saving this video and considering giving it a try to build my own
@AndrewThronImprovements
@AndrewThronImprovements Год назад
I appreciate it!
@tarek3702
@tarek3702 Год назад
No matter how many videos I watch of these DIY's. I'll never end up doing them ever 😂
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Haha I’m the same way
@jazztheehokage
@jazztheehokage 5 месяцев назад
​@@AndrewThronImprovements😢 as❤ ((
@Jay19384
@Jay19384 4 месяца назад
Lmao!
@loveafg4448
@loveafg4448 10 месяцев назад
Honestly perhaps the most useful DYI video on youtube. Thank you Andrew!!!!!!
@AndrewThronImprovements
@AndrewThronImprovements 8 месяцев назад
Glad to hear it! Thanks for the support!
@juancarlosmunoz7177
@juancarlosmunoz7177 5 месяцев назад
Oh my God, I caught a mistake that you fixed. Great, job. The drip edge was installed 1st then the phelp paper. I am not a profession I'm just a guy looking for answers because I'm building a shed and I almost made that mistake. The difference is. You caught your mistake. I will put the shingles then see the mistake. Lol. OUCH!!! YOU did AMAZING even with that hiccups. Love it and u got my full support.
@ACS1952
@ACS1952 Год назад
What a BEAUTY !! Nicely done!
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Thanks!!
@lindakleckner215
@lindakleckner215 Год назад
I see, it's like beautiful marble stone look. Good work; looks 🤩great!
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Thanks!
@jackdaviddean1771
@jackdaviddean1771 3 месяца назад
This video series and e-book is just what I need.
@nazmyyunus2562
@nazmyyunus2562 Год назад
Perfect timing. Just what im looking for
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Good luck with your project!!
@Biblestudy4beginners
@Biblestudy4beginners Год назад
Keep up the good work! Hope to one day build a shed like this, Thank you!
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Appreciate it! Good luck with your future build 👍
@claveles
@claveles 27 дней назад
Beautiful, I’m going to take pointers on this video. I’m trying to build my she shade.
@GrandmaSandy
@GrandmaSandy Год назад
Thanks for sharing this wonderful shared that you built to get a great job. It looks fabulous. Thank you so much for sharing. Hugs and kisses from grandma Sandy
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Thanks for watching!!
@tomlogan1531
@tomlogan1531 Год назад
Gorgeous shed ❤❤❤
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Thanks!
@EveryDayDabble
@EveryDayDabble Год назад
I am looking to enclose an octagonal gazebo which was already built, thanks for this detailed explanation of everything! Was thinking of using the LP Smart side paneling.
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Good luck with your project!
@piratetaylor29
@piratetaylor29 Год назад
Awesome modern design build. 👌
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Thanks Jessi!
@victorbrown3062
@victorbrown3062 Год назад
Nice work.but one major problem I can clearly see is that you put the drip edge on top of the shingles.facia boards will be rot in a year or so.just advice no judgement.but other than that it's some pretty damn good work bro.💪💪
@AndrewThronImprovements
@AndrewThronImprovements 8 месяцев назад
Hi! I think you might be referring to the ridge flashing - which did go on top of the shingles. All the other drip edge went below!
@MarlzJinx
@MarlzJinx Год назад
Excellent video! I appreciate the preview to see if it's something I really want to dig into.
@AndrewThronImprovements
@AndrewThronImprovements Год назад
I appreciate it! Thanks for watching!
@captjay7823
@captjay7823 Год назад
Very Cool However I would use soffits or screens for airflow. thinking warm air escaping etc. It came out very nice. Bravo.
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Appreciate it! And I agree…definitely would want to think about air flow if I was doing this again. Especially under the base frame. Thanks for watching!
@wyndiefeatherstone948
@wyndiefeatherstone948 10 месяцев назад
You did an excellent job!! I would hire you any day!! Lol I know I am suppose to be learning how to do it myself and I really have, which is great. I would like to make this style of building but make it about twice as big to use as a work shop. Thank you so much for all of the work and your excellent explanations.
@AndrewThronImprovements
@AndrewThronImprovements 8 месяцев назад
Thanks so much for watching and for the support 🙏
@terrellmcgee5980
@terrellmcgee5980 Год назад
You guys did an excellent job
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Appreciate it! Thanks for watching!
@bernadette721
@bernadette721 Год назад
Really really cute, well-done, so creative and down to earth. Love!
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Thanks!
@andrewraef6564
@andrewraef6564 Год назад
Hmm hun. Bl
@vojtaborsky
@vojtaborsky Год назад
perfect video, thanks a lot!!
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Thanks! Appreciate you watching!
@jsmith2081
@jsmith2081 Год назад
Nice work!!
@AndrewThronImprovements
@AndrewThronImprovements 8 месяцев назад
Thanks!!
@tiffanysteen8150
@tiffanysteen8150 Год назад
Looks great!
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Thanks!
@kgrimsley2
@kgrimsley2 Год назад
If you install one or two braces (so that they can pivot around a nail) the wall cannot fall backwards when you lift it. They act as a brake moving with the wall making it much safer! (At around time 48:00 in this video). I've done many walls by myself this way.
@AndrewThronImprovements
@AndrewThronImprovements Год назад
That’s a good tip! There are definitely better ways to do it than what I showed - but we got it done!
@breemessick635
@breemessick635 Год назад
Good morning! Beautiful work and I’m sure it’s been asked before, what is the soft wear you used to creat the rendering of your frame work?
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Hi! I used Sketchup (free version online).
@StaYUTI420
@StaYUTI420 27 дней назад
Dmaxryno built a very similar design on his channel. Really dig this design!
@diynatertater
@diynatertater Год назад
Love love love this video! keep up the good work!
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Appreciate it!!
@tapinproductions_
@tapinproductions_ 4 месяца назад
Great video. I’m sure the video recording and editing took a lot of time as well. Thanks for the quality content. 🔥
@j.a.r.family2576
@j.a.r.family2576 Год назад
All you're missing is heated floors . Dope shed though
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Appreciate it!
@tayahbennett5883
@tayahbennett5883 Год назад
Love the tradie boots
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Haha steel toed crocs should be a thing!
@kaioalexandrechaga5802
@kaioalexandrechaga5802 Год назад
I love all American makeovers, it seems so easy. In Brazil, it's not hahaha
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Haha appreciate it!
@dominicemanuel8029
@dominicemanuel8029 Год назад
Due to backyard space restraints, I’m looking to build a 12x8 shed just like this. Do you have different dimension settings in your course or is it only for 10x10 sheds?
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Hi Dominic! The course if for a10'x10' shed specifically, but you can use it as a basis for any other size. I would start with the RU-vid Videos to see if that gives you enough info to build it!
@yi1zhao
@yi1zhao 10 месяцев назад
rolls royce of sheds
@Steevsy
@Steevsy 3 месяца назад
This helped me build my own smaller version. Fantastic. I was wondering, has your Fascia warped at all from painting it black? I have seen a bunch of material saying that low LRV (light absorbent) paint could warp the PVC over time. As I am interested in doing the same, I would be curious how yours has held up.
@Jeremy-pf3bb
@Jeremy-pf3bb Год назад
Hello Renovision DIY
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Definitely some serious inspiration there haha. Jeff is the man!
@ricochet813
@ricochet813 Год назад
Can you explain the difference between your course and the free pdf link you posted?
@AndrewThronImprovements
@AndrewThronImprovements 8 месяцев назад
Hi! Course is just a BIT more detailed and has the materials list, cut lists, etc.
@BrunaDanielle
@BrunaDanielle Год назад
👏🏻👏🏻
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Appreciate it!
@johnbarney5787
@johnbarney5787 2 месяца назад
Why doesn't everyone build roofs like this on sheds? I'm going to build one, and so many videos show all these elaborate truss builds on the two-sided roofs . Is there an advantage to two sided sloped roof?
@user-ho1yu6cw4q
@user-ho1yu6cw4q 11 месяцев назад
VERY NICE GOOD JOB
@AndrewThronImprovements
@AndrewThronImprovements 10 месяцев назад
Thank you very much!
@chaddavis1299
@chaddavis1299 11 месяцев назад
Nice work! For the plywood that is exposed that you cut in for the top windows, did you poly or treat somehow? Also, were did you source the garage door? What thickness of plexi glass did you used. Was it plexi or plexi-acrylic? I have a 16x20 slab I poured a few months ago and looking to get started on the build.
@AndrewThronImprovements
@AndrewThronImprovements 8 месяцев назад
Hi! I did not treat the plywood cuts - but that wouldn't hurt! I got the door from Steeldoordepot.com. I used a TOO THIN thickness for the acrylic panels - I would go with something 0.25" thick. Thanks for watching!
@grizzlyhope
@grizzlyhope Год назад
How thick was the existing concrete slab, and did it have any footings? What was the cost of the project? Thanks
@AndrewThronImprovements
@AndrewThronImprovements 8 месяцев назад
Hi! I am actually unsure of the slab thickness. Total cost was around $4,500 for materials!
@rudi188
@rudi188 4 месяца назад
Why not attach the fascias when assembling the roof on the ground? I haven't done it myself, it just seems easier doing it on the ground and lifting the whole roof, incl the fascias, and attaching it in one piece.
@kevindud333
@kevindud333 Год назад
Someone probably already asked, but why no insulation?
@jamaryslatoni8706
@jamaryslatoni8706 Год назад
An estimate of the time and money put into it?
@angelasoccorsi848
@angelasoccorsi848 Год назад
Wondering the same thing
@stevie1748
@stevie1748 Год назад
Are those the new steel toed crocs? 🤣
@AndrewThronImprovements
@AndrewThronImprovements Год назад
😅😂
@dasilnei
@dasilnei Год назад
Wowsers!
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Thanks for watching!
@thecrazybiggin
@thecrazybiggin 6 месяцев назад
Great video, for the 2x4s do you need to wedge them in between the posts or can you screw on the posts?
@ricardov6841
@ricardov6841 Год назад
What is the CAD software you use for planning?
@MarlzJinx
@MarlzJinx Год назад
its in the comments, the one above yours
@MarlzJinx
@MarlzJinx Год назад
Sketchup
@ashovelhead
@ashovelhead 6 месяцев назад
Admire the work...but as a side note, even though they're Camo I can still see the Crocks!! What are those!!!
@michaelshelnutt3534
@michaelshelnutt3534 4 месяца назад
Hey Andrew, I am building my first shed and due to the subflooring being tongue and groove, the sheets do not go all the way to the outside edge of my (double) rim joists. What do you recommend? As I see it I have (3) options. 1- move my walls in so the subfloor edge is fully under the base board, or 2- build my wall where I intended it, causing the wall to have a slight gap under where the subfloor doesnt go out all the way, or 3- add a strip of board to the outside edge of the subfloor so the wall can sit fully on top of wood.
@AndrewThronImprovements
@AndrewThronImprovements 4 месяца назад
Hi Michael - if I was you and the gap was minimal (1/2), I would just go for it. If it’s larger, I would probably just rip a small strip as you propose in option 3. Good luck!
@luisfernandomurillomendoza4359
Amazing! What software are you using, before going to construction?
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Sketchup!
@stefani805Sanchez
@stefani805Sanchez Год назад
My toxic trait is thinking I can do this lol 😂
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Haha you probably can!!
@AaronHope_Sow
@AaronHope_Sow Год назад
For all that work you could've insulated it and ran a small mini-split to condition the space. Someone else wanting to build this sure could.
@potatoes1234
@potatoes1234 Год назад
Do you think the insulation would really be worth it if one is not spending a lot of time in it during high/low temps?
@MarlzJinx
@MarlzJinx Год назад
​@@potatoes1234 not if they're not spending a lot of time in it. But if they use it for like a side business workshop then yes, very worth it
@ivansoto8949
@ivansoto8949 8 месяцев назад
Nice video! Question, what nails did you use for the roofing? Do they stick out in the inside, meaning you can see the nails in the inside? I have 1/2 osb on my on my roof.
@AndrewThronImprovements
@AndrewThronImprovements 8 месяцев назад
Thanks! I used 1.5” roofing nails and they did stick through the roof decking on the inside
@benlopez1517
@benlopez1517 Год назад
How much did it cost and how many hours
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Cost breakdown is here! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qUXTZ3ZA4Vw.html It took me a few weekends since I was filming, etc.
@iwilli1169
@iwilli1169 8 месяцев назад
Excellent job. Question. How much building experience do you have before building this? How much were the materials?
@AndrewThronImprovements
@AndrewThronImprovements 7 месяцев назад
Hi! I had a bit of DIY experience from renovating my house. Total cost was around 5k but I have a cost breakdown video on my channel as well!
@kysimwpc
@kysimwpc Год назад
How much of the total cost?
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Cost breakdown is here! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qUXTZ3ZA4Vw.html
@CaseyAnderson-dr6bg
@CaseyAnderson-dr6bg 2 месяца назад
Sidewall
@neikaloscutoff
@neikaloscutoff 10 месяцев назад
You do realize I’m not actually gonna build a shed right? I just want to watch you build one 😂
@AndrewThronImprovements
@AndrewThronImprovements 8 месяцев назад
Haha many are guilty of similar
@BsmithSmith-be7gv
@BsmithSmith-be7gv Год назад
How is the LVP flooring holding up on the exterior of the shed?
@AndrewThronImprovements
@AndrewThronImprovements Год назад
So far so good!
@BsmithSmith-be7gv
@BsmithSmith-be7gv Год назад
That’s great. I am building a shed similar to yours and want to install the LVP. I live in Chicagoland so the weather is pretty tough. Thanks for the great videos!!
@Dlive2005
@Dlive2005 3 месяца назад
I subscribe nice masterpiece
@kennmacintosh2627
@kennmacintosh2627 Год назад
Nice shed, but since ur a DIY'er, you should have busted up the concrete pad and pour a new one in the back corner of the yard. Kinda wasted space in the middle of the yard.
@AndrewThronImprovements
@AndrewThronImprovements Год назад
I agree with you. Lesson Learned, unfortunately. Thanks for watching!
@Jaceson90210
@Jaceson90210 Год назад
Totally agree also. In California we have to have at least a 36 inch clearance between a fence or wall. Anywho it’s an amazing shed. I would love to have one. I wonder if it can be built under 5k for something similar..
@jkalebkillian2264
@jkalebkillian2264 Год назад
Nigga that's a lot of work lol
@CR-iz5lw
@CR-iz5lw Год назад
@@AndrewThronImprovements U g if gggggggg cy ggggggg
@felixtardif4654
@felixtardif4654 Год назад
@@AndrewThronImprovementsqq a pas q qq qqq et je qqqqwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq la llllllllllllllllllll 2:44:54 llllll lwlllwllllllwqwqlwwlwlwllllwqlllwllwlllllllwqwwwllllllllllllllllllllllll😢 2:45:10 llllllllllllllllwwlllllllllllllllllllllllllllllwllllllllllllllllllllllllllllllllllllllllllllllllllllllllwwlt
@ItsmeYaneth
@ItsmeYaneth Год назад
Do we always have to ask for permission to the city in order to do a shed
@AndrewThronImprovements
@AndrewThronImprovements 8 месяцев назад
Depends on where you live!
@user-qj1vp8vt8i
@user-qj1vp8vt8i 9 месяцев назад
Hi
@luisangelsalinas4188
@luisangelsalinas4188 Год назад
What 3D software did you use?
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Sketchup!
@jogginboy1
@jogginboy1 Год назад
Curious what the total cost was for this build?
@AndrewThronImprovements
@AndrewThronImprovements Год назад
About 4.5k. I have a full cost breakdown video as well
@rseltd
@rseltd Год назад
What software are you using?
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Sketchup!
@michaeldodo1722
@michaeldodo1722 9 месяцев назад
Too much lumber for one tiny shed. Looks good but not functional as far as using for storage. Over kill is not always good when it's not functionjng to serve a purpose
@maxwellstainback4421
@maxwellstainback4421 Год назад
Are your windows already warped??
@AndrewThronImprovements
@AndrewThronImprovements Год назад
They are acrylic panels so they do look a little “fun-house” like
@haruonoro420
@haruonoro420 7 месяцев назад
The first
@charlesmccomas8621
@charlesmccomas8621 29 дней назад
hello
@lesfay7966
@lesfay7966 Год назад
😊
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Thanks for watching!
@RifiaRifia111
@RifiaRifia111 9 месяцев назад
👍👍👍👍
@anonymous..-
@anonymous..- Год назад
All that work and no insulation or venting.
@griefer5846
@griefer5846 Год назад
its just a shed though
@griefer5846
@griefer5846 Год назад
insulation is so that whatever ur building could contain heat and stay warm, this is just a shed, nobody’s gonna live in it
@januarysdaughter6664
@januarysdaughter6664 Год назад
Are those steel toed crocks? 🤣
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Haha coming in 2025
@RJ1Reed
@RJ1Reed Год назад
How much
@AndrewThronImprovements
@AndrewThronImprovements Год назад
About 5k
@JeronimoStilton14
@JeronimoStilton14 12 дней назад
You could have put that shed as free on marketplace and it probably would have been gone in less than a week.
@007DFWAngel
@007DFWAngel 2 месяца назад
Crown up? And why?
@AndrewThronImprovements
@AndrewThronImprovements 2 месяца назад
Crown up helps prevents sagging and keeps everything uniform
@rocketman143
@rocketman143 Год назад
I think you overdid it on the framing aspect. I know that front wall was the heaviest. Too many 2x4s
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Haha probably - but better to be over built than under built imo
@lindakleckner215
@lindakleckner215 Год назад
Boy, are commercials getting creative or what😄.
@potatoes1234
@potatoes1234 Год назад
What do you think the commercial was? For the tools?
@lindakleckner215
@lindakleckner215 Год назад
@@potatoes1234 😄....🙂who's potatoes, are you from Wisconsin?
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Yea I’m confused too haha
@jeremynguyen2346
@jeremynguyen2346 Год назад
Make a discord server link now like right now
@AndrewThronImprovements
@AndrewThronImprovements Год назад
What’s up Jeremy? 😅
@jeremynguyen2346
@jeremynguyen2346 Год назад
@@AndrewThronImprovements how are you
@mikel9567
@mikel9567 Год назад
You talk about using screws over nails, but you drove the screws in so deep that you sunk the heads. That actually detracts from the strength of the screw. Screw heads should not be buried into the wood. Nails would be fine for this application, you aren't gaining any benefit by using screws.
@PaulBodyBuilder
@PaulBodyBuilder 9 месяцев назад
Where do you live
@AndrewThronImprovements
@AndrewThronImprovements 9 месяцев назад
I’m in MD
@systemuser8701
@systemuser8701 Год назад
Well it's different. Too different. It looks out of place like a whole different Tiny-House.
@user-gb6vb4vn1r
@user-gb6vb4vn1r Год назад
As an electrician you made me cringe the whole time 🤣
@AndrewThronImprovements
@AndrewThronImprovements Год назад
My bad dog
@user-zd2ny9jx2h
@user-zd2ny9jx2h Год назад
Why the overkill? That would be a very expensive shed. It's not a piano! Rookie! Now, your old lady can fill it with yardsale junk.! Ha ha!
@maxwellstainback4421
@maxwellstainback4421 Год назад
Very overbuilt
@AndrewThronImprovements
@AndrewThronImprovements Год назад
Totally agree
@harrydoull9385
@harrydoull9385 Год назад
To much talking
Далее
Tanish holatmi?😅❤️
00:41
Просмотров 338 тыс.
Contractors Hate Me For Showing You This!
24:20
Просмотров 877 тыс.
The Ultimate Guide to Building Your Shed Studio
24:23
Просмотров 670 тыс.
How to Build a Shed (Start to Finish)
26:41
Просмотров 153 тыс.
I Don't Get Why People Still Use These Joints
17:26
Просмотров 853 тыс.
We Test 3 Ways To Set A Fence Post (1 Winner)
22:23
Просмотров 886 тыс.
Tanish holatmi?😅❤️
00:41
Просмотров 338 тыс.