Тёмный

DIY How to Change a Water Pump Impeller on Suzuki DT-55 [Suzuki DT-55 Water Pump Impeller] 

DIYTechnician
Подписаться 11 тыс.
Просмотров 33 тыс.
50% 1

Buy me a coffee? www.buymeacoff... Buy me a coffee? www.buymeacoff... Forgetting standard house maintenance items can be costly. Avoid this by using my homeowner's and renter's quick reference:
www.diy-techni... Stuck or need help? Call me right now and show me your problem: paltap.me/DIYTe....
Please feel free to contact me directly if you need a hand or this isn't the exact answer that you need! DIY How to Change a Water Pump Impeller on Suzuki DT-55 [Suzuki DT-55 Water Pump Impeller]. There were a few things that went wrong when we did this, however, it was a learning experience. The impeller needed to be changed out as the thermostat light was indicating it was getting too hot which meant that not enough water was circulating to cool the motor which means that the impeller needs to be changed. They way you should change these every couple of years anyway. During attempted removal of the motor's lower half, two of the mounting bolts were corroded into place and subsequently got twisted off. We had to drill them out and replace the screws. One of the main take aways from this was to make sure to disconnect the shifting linkage. For this motor, it disconnects under the engine cover.
Here's a (paid)link to a new impeller kit:
WINGOGO 17400-94701 Water Pump Impeller Repair Kit Replacement for Suzuki Outboards 55/65 HP DT55 DT65 (1985-1997) Boat Motor Parts 17400-94700 Sierra 18-3243:
amzn.to/3fFMkY0
The description from the link above is:
This water pump impeller repair or service kit for Suzuki outboards OEM p/n 17400-94701 17400-94700. it is VERY IMPORTANT to check your boat motor part number before purchase.
The water pump rebuild kit replacement for 55HP 65HP Suzuki outboard motors DT55 DT65 boat parts replacement cooling system. more detailed information please see description below.
Compatible with the outboards boat motor Sierra Marine 18-3243. This impeller kit makes repair and maintenance of water pumps easy.
What is included: Water Pump Impeller 17461-94700,17461-94701. Wear Plate 17471-95204. Key 09420-04005. Gasket 17472-95310 as pictures showed.
Find the correct impeller kits for your boat motor, it is VERY IMPORTANT to check your outboard model or s/n before purchase.
Please check out my website: www.diy-techni...

Опубликовано:

 

16 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 39   
@Boaters_hub
@Boaters_hub 2 года назад
Thankyou! Please keep making these videos on this engine. I just got one
@DIYTechnician
@DIYTechnician 2 года назад
Right on!! If you ever do change the impeller be sure to disconnect the shift linkage FIRST. Thanks for commenting. ✌️
@NorthernIrelandFishingReports
@NorthernIrelandFishingReports 2 года назад
Hi guys. You could have saved yourself a headache by removing the shift link rod first. The bolts broke due to you not taking the shifter bolt out. Hitting it with the hammer before removing the lower bolt also under the electrode. I'll bet you regretted deciding to change the impeller. Tight lines and hope you got it sorted. I also have one and did a few videos on the DT suzuki
@DIYTechnician
@DIYTechnician 2 года назад
Yup figured that out the hard way:) thanks for the input
@thivarattanabounyang4635
@thivarattanabounyang4635 2 года назад
Hello. I have dt85 also .what year is that n what size prop are you using ? I have 15p on my n it’s only going max speed 21mph.
@DIYTechnician
@DIYTechnician 2 года назад
This one was an 85. No idea on what size prop it had.
@jstorres486
@jstorres486 2 года назад
I have the same engine and have a cooling problem.. changed the impeller and still.. I have water coming out the tale tell for the first 20 seconds of start up and then only exhaust comes out.. I’ve run it with muffs on and inside 55 gallon barrel.. when I take the thermostat housing off I get great water coming out the pee hole and out the thermostat housing when I put it back on I have nothing out the pee hole.. I’ve ran water tru everything and no clogs at all.. has anything like this ever happen to you? Any place u can point me to? Thank you
@DIYTechnician
@DIYTechnician 2 года назад
Gosh that one has got me stumped but I’m no boat motor mechanic. Personally I’d check the forums and if no luck there, take it in. Just my 2 cents.
@jstorres486
@jstorres486 2 года назад
@@DIYTechnician thank you.. God bless
@mitchcoffman7128
@mitchcoffman7128 3 года назад
Did you half to take the 12mm nut all the way off and slide the screw out or what?
@DIYTechnician
@DIYTechnician 3 года назад
Which part of the video?
@420carper6
@420carper6 3 года назад
Yea you do unfortunately no videos on RU-vid show this step regarding separating gear linkage from lower unit very misleading for anyone following these videos although this video he does explain and point to it at 1:59
@marcusjonsson8417
@marcusjonsson8417 Год назад
I have the same question, how did you fix that?
@dannyboyyydz7641
@dannyboyyydz7641 Год назад
After water pump and lower unit-rebuild by mistake 🤦 al been takin care of ,what just shove everything back in ? Remember I pushed in the the pin to release the lower unit at the top right of the motor ,shifter pin how does this all line up ?
@DIYTechnician
@DIYTechnician Год назад
I’m no pro on this. Had a friend doing the work.
@EricGrow
@EricGrow Год назад
How do you align shift rod screw when reconnecting lower unit? I can’t alin mine
@DIYTechnician
@DIYTechnician Год назад
Hopefully someone can answer this for you on the comments.
@nandoelgancho
@nandoelgancho 2 года назад
I noticed that when you had it all assembled the shifting rod was not all the way flush in . How did you get it back in flush . I’m having the issue where mine won’t sit back down flush . At min 3:05 you can see where that shifting rod is not flush that how mine it and I can’t get it to go back down so the seals and that rubber plug sits flush. Help please
@DIYTechnician
@DIYTechnician 2 года назад
Yes sir. That is correct. Ended up having to take the lower in and get it rebuilt.
@thivarattanabounyang4635
@thivarattanabounyang4635 2 года назад
What is the top speed on your dt85?
@DIYTechnician
@DIYTechnician 2 года назад
Just an estimate but when running in optimal condition probably between 30 to 40 pushing a 16 ft aluminium. Plenty fast enough for me:)
@thivarattanabounyang4635
@thivarattanabounyang4635 2 года назад
@@DIYTechnician just got my out the shop n it only top at 22mhp feel like it can do more … I have a 15pitch on there n got new hub pressed in .. n 16 wellcraft .. is there smthing I need to do it make more speed? It went up to 28 befor I put in shop .
@AndrewPope-bx3bg
@AndrewPope-bx3bg Год назад
Do you do different sizes
@DIYTechnician
@DIYTechnician Год назад
What in particular
@broomfieldsdual-sport
@broomfieldsdual-sport 2 года назад
My motor pumps and then stops i tried again quick and it pumps and now doesnt pump… ?? Imany advice
@DIYTechnician
@DIYTechnician 2 года назад
When’s the last time the impeller was changed?
@hansmika
@hansmika Год назад
Where do you source your spare parts from?
@DIYTechnician
@DIYTechnician Год назад
In this case it was ebay
@marcusjonsson8417
@marcusjonsson8417 Год назад
How did you do with the shiftlink?
@DIYTechnician
@DIYTechnician Год назад
Its on top. Disconnected it.
@johnnycrosby7662
@johnnycrosby7662 7 месяцев назад
What year is the motor
@DIYTechnician
@DIYTechnician 7 месяцев назад
I forget which year this was. If I had to guess I’d say it was 20 years old.
@ab1142
@ab1142 Год назад
Didn't work for me. Could not get leg off no matter what. It would only drop about 4 inches then no more.
@DIYTechnician
@DIYTechnician Год назад
Did u disconnect the linkeage
@ab1142
@ab1142 Год назад
@@DIYTechnician yes I did.
@ab1142
@ab1142 Год назад
@@DIYTechnician taking to boat shop now
@DIYTechnician
@DIYTechnician Год назад
@@ab1142 we Ended up beating it up pretty good with a dead blow but this probably isn’t the best idea.
@travisatturio8081
@travisatturio8081 2 года назад
My bolt broke too
@DIYTechnician
@DIYTechnician 2 года назад
Oh no! Did you fix it yet?
Далее
Vibes in Ney York🗽❤️! #shorts
00:26
Просмотров 21 млн
Testing an outboard water pump
4:00
Просмотров 991 тыс.
Bootsmotor Suzuki DF15A Impeller wechseln Baujahr 2016
12:20
How to unclog the tell-tale on an outboard motor.
2:56
Impellerbyte - Yamaha 40hk 2-takt
14:07
Просмотров 19 тыс.
Suzuki dt 55hp carboretor trouble shooting
2:19
Просмотров 10 тыс.
Suzuki DT55  ei pelaa, pelaa , ei pelaa... (osa1)
43:49
Suzuki DT 50 how to install water pump
4:26
Просмотров 69 тыс.
Vibes in Ney York🗽❤️! #shorts
00:26
Просмотров 21 млн