DIY - How to make LEASHES for fishing rods and Kayak gear

Подписаться 2 тыс.

Просмотров 175 тыс.

50% 1

DIY - How to make LEASHES for fishing rods and Kayak gear
Hello guys
With this bad weather that we have been having I cant get out to fish.
So I made another "DIY" video called "Get over here" that explains how I make the leashes to hold all the gear that is in the kayak with us. Rods, knives, pliers, Nets, icebox ...
Hope you enjoy the video and if so, please share it, press that like button, give me your feedback and subscribe if you haven't already.
Thanks.
---------------------------------------------------
If you would like to help support the channel:
paypal.me/JTAk...
And thanks, it all counts.
---------------------------------------------------
Gear / Tackle / Camera
bit.do/eAfr4
Weed cuter nylon
bit.do/eAfrc
Crimps:
bit.do/eCj7d
---------------------------------------------------
DISCLAIMER: This video and description contains affiliate links, which means nothing because Amazon canceled my affiliate account because I had no sales, so enjoy the gear anyway. Thank you for the support!

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 228

@kravanamjesecu 4 года назад

One tip,no charge...since you have boiling water near on the stove,instead of burning thermo sleeves with lighter just sink it in the boiling water for a few seconds,it shrinks the same...especially when you have some delicate thing like shinking the tube on the fishing hooks where you can't go near with the lighter cause you would burn the line or braid. Excellent video btw,I will try to make it... 🥂

@JTAKayakFishing 4 года назад

That's a pretty good idea. But you'll need to be quick or the water won't be hot enough. Or you'll have to reheat the water Let me know how it went :D

@kravanamjesecu 4 года назад

@@JTAKayakFishing I've done 4 of them,2 of 2mm and 2 of 3 mm. My thumbs hurts like hell now. 😁 Tried to boil the heat shrinks but actually that didn't do well...in the end I've heat it up with heating fan. Thanks for the video,it made me get up and do something usefull today... 😃👍🏻

@JTAKayakFishing 4 года назад

@@kravanamjesecu Holy crap I'm an influencer now hehehe :D Kidding, thank you for actually taking the time to give some feedback and trying it out for your self. The first ones make your hands hurt like hell, but the more you make them the easier it will get, you will realise you don't need to make all that strength to keep everything in place and it won't hurt as much. In this Corona virus lock down we are going true in Portugal, you just made my day. Thank you :D

@kravanamjesecu 4 года назад

@@JTAKayakFishing the pleasure was all mine. Keep it up bro,greetings from quarantine Croatia. 🥂

@kravanamjesecu 4 года назад

@@JTAKayakFishing since the first 4 a made a dozen of slim ones for my friends. Now I don't use anymore hand power,instead I put a tube in the battery screwdriver and use the torque from the drill...one cord takes mi about 5 minutes including the heating.

@geoffmarriott4387 5 лет назад

Great video and ignore the comments about being able to buy for $n - these people just don't understand the satisfaction you get from making your own kit - it's not about the cost or ease - come the apocalypse they will be coming to you - keep up the good work

@JTAKayakFishing 5 лет назад

Thanks for your feedback. It really is a lot more satisfying to do some of this stuff ourselves 😎

@SdW.8 2 года назад

Brilliant! I appreciate how clean, sleek and useful these are to diy. Easy to fit to your needs. I finally got my first kayak and am looking forward to keeping all my gear if/when I dump myself. Thanks for the great tutorial! Much love from the Midwest US 💖

@JTAKayakFishing 2 года назад

Thanks S DW I really appreciate you kind words. I'm really glad you found the video usefull, hope you give them a try. I still use this same leaches, they keep going and going and going :D eheh Thanks man, just made my day, from Portugal :D

@markdancer3501 4 года назад

I had seen other videos on how to make the leashes, but your technique for reversing the coil direction using the stick is just so much easier. Also like the use of the heat shink to neaten up the crimps. Thanks for the video.

@JTAKayakFishing 4 года назад

Thanks you for you comments :D And these leashes are really useful, i'm still using them and it has been almost 2 years. :D

@jaywyce4446 6 лет назад

Good vidio, very informative. Just got my kayak and I love doing these kinds of things myself instead of buying them. Thanks

@JTAKayakFishing 6 лет назад

jay Wyce Hi, thanks. Yes I like to do this sort of things myself. Its half the fun, when you go fishing and everything comes in to place. 🤙

@jenniferbilbrey4351 5 лет назад

That was awesome. You are very creative. I am so glad you shared this video. Keep up the good work good stuff

@JTAKayakFishing 5 лет назад

Thanks I appreciate your FeedBack 😆

@jasonyannuccelli2499 4 года назад

That’s so clever... I will have to watch the video several more times as I don’t quite get how to do your reverse coil idea... how to start it off. Fantastic job. Might have a go myself. Much cheaper than $5-10 bucks each ! Thank you

@JTAKayakFishing 4 года назад

Jason Yannuccelli thanks I’m glad you found it useful. And for sure this way is a lot cheaper and obviously more satisfying as well. To reverse the coil, just star twisting the nylon the other way. I have made key chains with thinner nylon as well with this technique 😜

@mattclark1429 4 года назад

This is exactly what I was looking for. Thank you.

@JTAKayakFishing 4 года назад

I'm glad it helped :D

@LindenRanch 3 года назад

Love this idea and a great way for color coordination of various lengths and coil diameter variation. So SATISFYING.

@JTAKayakFishing 3 года назад

Im glad you liked it. Give it a try, it realy is satisfying :D

@SdW.8 2 года назад

Oooo color coordination is a great idea! Thanks for that tidbit.

@rvchipster 6 лет назад

Way to cool. Thanks for taking time to put the video together.

@JTAKayakFishing 6 лет назад

phil pring Thank you for watching it and your Feedback

@bolgar1965 4 года назад

Awesome mate, will definitely be doing a few of these, for the milk crate rod leashes, fish grips and other bits and pieces around the yak.

@JTAKayakFishing 4 года назад

Thanks, I glad you liked it :D

@andrewsmith941 4 года назад

old telephone cords work great just zip tie each end

@lElRlDlKl Год назад

This is a great Idea, thank you!

@JTAKayakFishing Год назад

Thanks i'm glad you found it usefull :D

@brianrychetsky2377 2 года назад

One of the best DIYs yet!

@JTAKayakFishing 2 года назад

Hi Brian, thanks a lot for taking the time to say something nice :D I'm really glad you liked it, and I hope you give it a try, they are really useful.

@riverebro Год назад

cheers just made them now gotta find them huge crimps to hold it in place

@JTAKayakFishing Год назад

Hi Investigator, try electricians stores, or even fishing tackle stores that are more salt water focus. :D

@ruicaeiro5204 6 месяцев назад

Muito bom….queremos mais😊

@JTAKayakFishing 6 месяцев назад

É só entrar no canal que tem lá uma série deles :D heheh. Obrigado pelo comentário.

@MrDaveB123 6 лет назад

Very cool Im all over that !!! Thanks

@JTAKayakFishing 6 лет назад

MrDaveB123 I'm glad you found it helpful. 🤙

@crowman5936 5 лет назад

That was slick I'll pass that on to my Yak friends.

@JTAKayakFishing 5 лет назад

I'm glad you found it useful. Thanks for the support, hope your friends like it as well.

@crowman5936 5 лет назад

I'm sure they will.@@JTAKayakFishing

@michaelosmon 4 года назад

Genius.

@JTAKayakFishing 4 года назад

Thanks, I'm really glad you liked it. Hope it helps :D

@kepa64210 4 года назад

Well done mate! Simple but clever. Greetings from Basque Country.

@JTAKayakFishing 4 года назад

Thanks :D I'm glad you liked it. And hi from Portugal :D

@300-LYF 5 лет назад

Fantastic thank you so much from Australia

@JTAKayakFishing 5 лет назад

You are very welcome, I'm glad it helped you out.

@ajw007white4 6 лет назад

That's pretty cool man you did a good job

@JTAKayakFishing 6 лет назад

Thanks I'm glad you liked it. Let me know how it went for you if you decide to make them yourself.

@theimpaler5034 5 лет назад

I use leg ropes or body boarding ropes it's all done very little mods needed and there designed to stretch and there saltwater use and last longer

@JTAKayakFishing 5 лет назад

Whatever works right 😜

@wayfararout6258 2 года назад

I just lost my fish and my grabbers yesterday in a tournament and it ended my day

@JTAKayakFishing 2 года назад

Damn man that's rough. All because you didn't have a leash? I have lost rods because I didnt had leashes on my gear but never in a crucial moment like that. Feels bad man. Hope you give this a try then :D

@Agapenutrition 6 лет назад

Thanks for the great video.

@JTAKayakFishing 6 лет назад

Thank YOU, for watching

@tomb1198 4 года назад

Wood dowels work as well to wrap the line around. I used an old large baking pan to boil thrm in. Could make them longer.

@JTAKayakFishing 4 года назад

I guess anything that's tubular that won't be ruined by the boiling water, will do the job. Mine extento to more than 1 meter, it's very useful that way. :D

@carolyndice2425 2 месяца назад

Brilliant!

@JTAKayakFishing 2 месяца назад

Thanks, I’m glad you found it useful 🤙

@anamariaalmeida7623 6 лет назад

Bem pensado! A usar em várias situações. Boa!

@Thalarctos. 6 лет назад

Excellent !! ;-) de france

@JTAKayakFishing 6 лет назад

Merci, je suis content que la vidéo vous ait plu. :D

@pa1264 4 года назад

Awesome video thank you.

@JTAKayakFishing 4 года назад

HOBIE KAYAK thank you for your comment. And for actually taking the time to say something about it. 🤙

@geraldfranz9085 4 года назад

Freakin awesome, homemade sheet !!! Good Christmas gift for yo fishin partners and family. The heat shrink really gives it that professional custom look. Great job, looks store bought and ya can't beat that, 2 thumbs up brother !!! 👍😎👍 😎👍✌🖖🐟💥🛎

@JTAKayakFishing 4 года назад

Gerald Franz, Noooo, thank you for that comment :D I'm glad you liked it, hope you give it a go and make some for yourself, and they actually are some cool gifts for your fishing buddys :D

@AnsariBaksh 5 лет назад

This is pretty cool! Thanks for sharing :-)

@JTAKayakFishing 5 лет назад

Thanks for your feedback 😀

@skygod7358 4 года назад

Just what I’m looking for! Thank you

@JTAKayakFishing 4 года назад

Im glad it helped :D

@gregmilstead1369 3 года назад

Great video I would love to make one of those but the problem is there's no material list thanks a lot have a great day

@redwood1957 5 лет назад

Nice I used old telephone spring cord

@JTAKayakFishing 5 лет назад

What ever works right 😜

@suncoaster8578 6 лет назад

That was so cool 😎

@JTAKayakFishing 6 лет назад

I'm glad you liked it. Try it for yourself and let me know how it went.

@allkindsofoutdooractivities 2 года назад

Great DIY!

@JTAKayakFishing 2 года назад

Thanks for the comment, hope you give it a try :D

@allkindsofoutdooractivities 2 года назад

@@JTAKayakFishing I sure will!

@tammysmith1367 4 года назад

I do not thing so we have used them for years on pneumatic spear guns shooting mullet with no problem. Believe me they have held up fine after being continuously being stretched out.

@aquarius1924 2 года назад

Nice Video!!! Thanks for sharing!!!

@JTAKayakFishing 2 года назад

Thanks, m glad you liked it :D

@willie9397 6 лет назад

well done

@NobodyOwesYouAnythin 5 лет назад

Thanks for the video. Subscribed 👍🏻

@JTAKayakFishing 5 лет назад

I glad you found it useful. Thanks :D

@larryrudolf667 6 лет назад

Larry R I really like the way you made the leases. Could you list the size of the nylon line used and the size of the aluminum tune you used to wrap the coil for boiling?

@JTAKayakFishing 6 лет назад

Hi thanks,. I have 2 sizes for the nylon and the aluminium tubes. The bigger leash is 3mm nylon and 16mm tube, The smaller one is 2mm nylon and 8mm tube. But you can try any different sizes.

@Mairon.A.A 5 лет назад

Que legal ! Vou fazer também ! valeuu

@JTAKayakFishing 5 лет назад

Ainda bem que serviu para tirar umas ideias. Força depois mostra como ficou 😎

@XchakGearz 5 лет назад

sweet!

@pappy451 5 лет назад

cool tip thanks .

@JTAKayakFishing 5 лет назад

i'm glad you liked it. Thanks for watching the video

@domingospedroaraujo9766 5 лет назад

Abração ❗ Obrigado ❗👏🏻👏🏻🤗

@dougmac8904 5 лет назад

Thanks

@JTAKayakFishing 5 лет назад

You're welcome, I'm glad it helped you out.

@davidmanevich1040 4 года назад

Nice job it would be easier to understand if you explained what you were doing but great video still

@tammysmith1367 4 года назад

I like to use old telephone wires they stretch out real good

@JTAKayakFishing 4 года назад

Great, the important thing is to secure or gear right. But wont the copper wire inside rust, especially in salt water?

@Brandon6453 4 года назад

@@JTAKayakFishing Copper wont rust... Only iron Fe2O3 is chemical equation. Now copper does patina (turns from shiny to green like statue of liberty)

@JTAKayakFishing 4 года назад

@@Brandon6453 The patina is the coppers oxidation, meaning it will eventually break. And considering it's a small wire inside, and that you have salt water, it will happen very fast. So the problem is still the same. Call it rust or call it patina. Any metal in a saltwater environment, you are bound to have problems. With the add it bonus of green oxidation starting to spread everywhere. With this nylon ones, that's just not even a problem to consider.

@Brandon6453 4 года назад

@@JTAKayakFishing I wouldnt trust copper phone line either. For a tool sure, but not a rod. Also you can chuck your rods in a drill to do your wraps for you.

@1352opd 4 года назад

just make sure the string isnt twisted type, it has to be round trimming line. just a heads up, learned the hard way

@JTAKayakFishing 4 года назад

Thanks for the heads up. Never actually tried with those type of nylons but was actually wondering if it would work.

@jayl24 3 года назад

Very nice video! What is the tiny metal (aluminum?) tube used to lock the ends of the leash and where to get it? Thank you!

@JTAKayakFishing 3 года назад

Hi, they're crimps. Just type crimps on google and you will see. You can get them on electrician stores. Fishing tackle stores also have them but it's more expensive. Thanks for you feedback :D

@domingospedroaraujo9766 5 лет назад

Parabéns SSSSSSSSSSSSSSSSSSSSSS 👏🏻👏🏻👏🏻 👍🏻 💯 Obrigado 🎣❗👏🏻👏🏻👏🏻

@JTAKayakFishing 5 лет назад

Obrigado Domingos, não sabia que estas trelas iriam dar tanto jeito. Uso para tudo, até para o radio Walkie talkie eu estou a usar :D Ainda bem que gostas-te. 😎

@Mr40tt 4 года назад

Thank You! Captain Carpman

@KennyFishbone 3 года назад

Cool! Made in USA

@JTAKayakFishing 3 года назад

I'm from Portugal buddy :D

@MTEXX 2 года назад

murica!

@plutoplatters 5 лет назад

"Paracord" boom.... done in 30 seconds.

@JTAKayakFishing 5 лет назад

What ever works right :D

@scottbigness7991 5 лет назад

plutoplatters This is way cooler...

@toddshobbyzone659 5 лет назад

hi, can you post any links for the supplies--- the nylon and the crimps?

@JTAKayakFishing 5 лет назад

Hi, no problem: Weed cutter: bit.do/eAfrc Crimps: bit.do/eCj7d (you have to buy then according with the width of the Nylon you end up getting)

@barbedstar6480 6 лет назад

Hi, good video...got me inspired! What brand and size is the lime green weed eater line?? Can only find orange...uck! Really would like the lime green. Thanks.

@JTAKayakFishing 6 лет назад

BarbedStar hi i'm glad you liked it and got you inspired to go out and try it for yourself. i dont think it really matters the brand cause i bought it in Portugal. but orange is a great color, higley visible and ist a cool color. Just try it and see if it looks cool. at least you wont lose your gear. let me know how it works out and share some pics.🤙

@gettinrings 6 лет назад

If you want a different color ...you can put 550 Para cord cover over the weed eater line...just pull out the center strings of the Para cord and slide the para cord cover onto the weed eater line.... para cord comes in any color and the texture is like a rope....I saw a RU-vid video sometime ago on how to do it .... PART ONE: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kJ8J0ieJbiE.html PART TWO: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_vmZ8r1snXA.html

@barbedstar6480 6 лет назад

Thanks, may have to para cord them....no lime green to be found around here.

@JTAKayakFishing 6 лет назад

I have seen that video also. Thought about doing it but since I use mine primordly in salt water, it would not be very good cause it would catch a lot of salt when it dries. And salt its not a friend of fishing gear. I normally don't even wash the rod leachs, just trow them with the rod holders in the trunk of the car and take them out next fishing trip. But if the color means that much to you then go for it. Don't forget to show the end results.

@barbedstar6480 6 лет назад

Kayak is lime green, (maybe limey yellow), bright blue and white...orange just did not cut it. So I went with used black phone charger cords that ended up being just perfect. The one that I put on my paddle was never in the way when we 'yaked' yesterday. Got that idea from Pintrest. All is well that ends well! Thanks for your video and reply.

@markt.weston8940 2 года назад

I would have thought some verbal communication as to a description would have been more helpful

@angertone213 2 года назад

Are you blind? he might be mute. Regardless of whatever language barrier there is, this person was pretty clear with his illustrations.

@snuffcan 5 лет назад

Great video, what size crimps did you use for the 3mm nylon line?

@JTAKayakFishing 5 лет назад

Hi thanks, I used 3x6mm. The more snug you can get them the better they will grip the nylon 😀

@badboyfaysal14 6 лет назад

ive done this before. its very hard on your fingers. i would advise buying 10 pack on amazon for like $12

@JTAKayakFishing 6 лет назад

Hi, I've done 6 or 7 and I don't need anymore. And my hands are perfectly fine. But thanks for your feedback. If you can place the link for those leeches in the comments I would appreciate.

@badboyfaysal14 5 лет назад

I think I might just have week joints lol Here is the link to a 12 pack for $9.99 Dicero Fishing Lanyard (Pack of 12) Accessories Plastic Retractable Coiled Tether with Carabiner for Pliers Lip Grips Tackle Fish Tools www.amazon.com/dp/B073NY3MZK/ref=cm_sw_r_cp_api_ebFVBbTD377HJ

@francorossi5966 4 года назад

Great video! What if instead of boiling i use a hot air gun?

@JTAKayakFishing 4 года назад

It may work as well. I think by boiling it gets heat in a more even way to all of the coil. with the heat gun you can run the risk of overheating some parts, deforming them. But give it a go and then tell me how it went.

@francorossi5966 4 года назад

@@JTAKayakFishing ok so i tryed right now.. and yes is like you sad.the result is good but not perfect. There are few parts with a different curve

@JTAKayakFishing 4 года назад

Basta chiedere that’s awesome. Thanks for giving us some feed back on the heat gun solution 🤙

@hothmobile100 4 года назад

This is amazing and impressive. However, there is a Van Staal made leash for only 25 bucks. The cost of that 400 pound mono you used here is pretty high I would think so it's probably more efficient to buy the Van Staal leashes on ebay.

@JTAKayakFishing 4 года назад

Hi Richard, thanks for the comments :D But actually the nylon costs around 3.5€ for 15m. And if i'm not mistaken, it's enough for 3 or 4 leaches. like the one I make, witch are pretty big.. . And the last for ever, I still use the same ones I made then. And it's something that you have made for yourself and that feels good also.

@hothmobile100 4 года назад

@@JTAKayakFishing good to know but I just found that Aftco makes one for 6 bucks. But I'm impressed with your ability to make your own.

@JTAKayakFishing 4 года назад

@@hothmobile100 Give it a try, you'll see it's actually quite satisfying.

@bryonrickard4617 5 лет назад

What size crimps for the 2mm line?

@JTAKayakFishing 5 лет назад

Hi, you can use any size actually as long as the line goes thru them. After that its just a matter of using the plier and clamp on tight.

@robertoferreira_bethopesca127 5 лет назад

Topdelinha vo tentar fazer blza

@JTAKayakFishing 5 лет назад

Obrigado, depois mostra como ficou 😜

@TheScobyrex7 4 года назад

How thick is the nylon wire? I want try this tomorrow. Thank you.

@JTAKayakFishing 4 года назад

Depends on what you are trying to secure. Smaller things, smaller nylon, bigger things, bigger nylon.

@jayl24 3 года назад

Thank you for sharing this wonderful idea! I tried with very thin line (0.065") and the coil was very loose. I guess that you used a much thicker trimmer line? Also it's hard to find lines with a round cross-section. Does a different shape other than round work? Thank you so much!

@JTAKayakFishing 3 года назад

Hi Jay L, thank you for your comments :D I really appreciate you taking the time :D The blue line that I have it's actually 0.0078" só the difference is not all that great. When you finish the 15 minutes of boiling the coil in the water, did you flip the coil like I do? Cause it gets a lot tighter when you flip it. I have seen those square lines but I have never tried them out. Maybe you can test that out tu see and get back to me. But you shouldn't have any problems getting the round ones in gardening stores. Have it a go and let me know :D

@jayl24 3 года назад

Thanks for the reply! I made another one today with 0.065" round line and it turned out to be considerably better. Maybe shape is one factor. What size of the aluminum crimps that you used for your 0.078" line? Amazon sells only two sizes (1/16" and 1/8") of crimps that are relevant. I will try to get some 0.095" line with 1/8" crimps to see what happens. Cheers

@JTAKayakFishing 3 года назад

@@jayl24 Don't stress about the size of the crimps. As long as you can fit the line and after you crimp it, its secure. Thats fine. And the more you make them, the easier it will get and the better they will be.

@kkay8209 4 года назад

Nice video. Sorry if I missed it somewhere but I have a few questions. First what diameter is the larger aluminum tubing and what length did you cut it? Secondly, What was the finished length of your leash...and how far does it stretch out? Lastly do you know the ratio of number of feet of trimmer cord to length of finished product? Thanks for your help.

@JTAKayakFishing 4 года назад

Hi thanks. The larger tube is 16mm and its cut to the length of the frying pan.The finished length on this one is around 30cm. I haven't tested it out to see how much it stretches but it's a lot, You never need to stretch it to the max. And it takes around 5m of nylon. You don't have to make them this big. I just like it that way so not to stretch them too much and deforme them. And can have them hooked to one side and move them around the kayak to different rod holders and it's no problem at all.

@sparkiekosten5902 5 лет назад

Trying this right now but my hands ache after trying to twist on nylon on the rod. I have to do 4 of them. How did you stop your hands aching?

@JTAKayakFishing 5 лет назад

Hi, yes it hurts a little bit because of the force you have to do to stop the nylon from uncoiling on the tube and it takes a wile to coil the entire tube. I don't have any advice for stopping the aching on your hands. Just think you will only need 4 leashes and not 40 😀😎👍

@sparkiekosten5902 5 лет назад

@@JTAKayakFishing My hands didn't ache so bad after the 4th one. The first leash was murder....The fourth not so bad. I'm very happy with my outcome. How are yours holding up after all this time? Thanks for the video.

@JTAKayakFishing 5 лет назад

Sparkie Kosten Ya I forgot that, the first one was the hardest one to do, after a few it gets easier and easier. I guess we kinda get to know how much strength it actually takes to get the job done with less effort. My leashes not only are they still going strong and I have them for little over a year but I have done a couple few more to use on other stuf. In my last video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vPkwVKZqwgQ.html you can see that my rods and knife leashes are still the first ones I made and I dont even take them out of the kayak they are allways there. And I have made new leashes for my radio that I have attached to my vest. I also have made keychains using this leashes with thinner nylon. I really like the outcome, had no idea it would work out this great. I'm glad it helped you to go out and try it for yourself. Cheers. 👍💪

@t1rider654 5 лет назад

I used 3/8" wood dowel which I chucked in my 18v drill. Spun up slowly and used hand to guide the coil loops. No hurting hands!

@user-lr7ip1nk5p 5 лет назад

спасибо буду делать.

@JTAKayakFishing 5 лет назад

Пожалуйста. Я надеюсь, что все работает хорошо.

@user-lr7ip1nk5p 5 лет назад

только закончил делать все отлично. спасибо очень доволен!!!

@JTAKayakFishing 5 лет назад

я рад, что все прошло хорошо

@halmoore8558 4 года назад

Can this be connected to a phone at work?

@JTAKayakFishing 4 года назад

Why not, :)

@pa1264 4 года назад

Is that a stainless steel rod or aluminium rod.

@JTAKayakFishing 4 года назад

HOBIE KAYAK its an aluminum rod. It’s easier to get and cheaper also.

@pa1264 4 года назад

@@JTAKayakFishing Thank you for your help very much appreciated.

@bryonrickard4617 5 лет назад

What is the diameter of the weedeater line?

@JTAKayakFishing 5 лет назад

Hi, It's 2mm and the bigger one it's 3mm.

@paulodeoliveira929 5 лет назад

👏👏👏👏👏👏👏👏

@JTAKayakFishing 5 лет назад

Obrigado Paulo :D

@MrJessie555 6 лет назад

Hi! Can you tell me what is the name of the material coiled ?

@JTAKayakFishing 6 лет назад

Hi, it's nylon thread used in weeds cutter machines. You can get them at home improvement and gardening stores.

@adaml1324 5 лет назад

Is it a certain brand that works best? I use Stihl string in my trimmer and it looks stiffer that what you were using.

@JTAKayakFishing 5 лет назад

Adam L Hi sorry for the delay on my answer, I didn't see the comment. I have tried 2 different brands with the same results on both. I haven't tried that brand yet. Try another one that feels more soft or malleable to see if the end result will be diferent. Mine cost like 6€ for the pack. 👍😎

@brucemulvey9948 4 года назад

What was the thinner tube for?

@JTAKayakFishing 4 года назад

Hi, to make thinner leashes, for small things, like, knives, pliers and stuff like that.

@brucemulvey9948 4 года назад

JTA Kayak Fishing perfect! I get that. This was a really good video and something I will definitely use (I lost a nice rod & reel jigging near a drilling platform). I don’t want to ever lose another one.

@JTAKayakFishing 4 года назад

@@brucemulvey9948 I lost 3 rods, with reels, line and lures, after flipping the kayak 2 times. Learned my lesson though :D

@kewdo1137 6 лет назад

What is the green stuff???

@JTAKayakFishing 6 лет назад

Hi, it's nylon thread used in weeds cutter machines. You can get them at home improvement and gardening stores.

@chancho789 5 лет назад

Gracias.

@JTAKayakFishing 5 лет назад

De nada, aún así que gustó. Espero que ayude.

@muhammadfirozshakir2372 3 года назад

Can this work on a surfboard?

@JTAKayakFishing 3 года назад

I don't see why not. :D

@cmtetaboaco 5 лет назад

Hy, will it work if instead of boil, just use the heat gun? thanks

@JTAKayakFishing 5 лет назад

I have thought about that, it would be faster and less messier. But never ended up trying. Did not want to take the chance of uncoiling the spring and it not being even considering its a big spring. But give it a go and let me know 😎

@oinc7320 3 года назад

How do you discover it was 400 pound mono? I thought it was weed wacker cord. Yeah a comment or subtitles of some usefulness in the video would have been nice.

@JTAKayakFishing 3 года назад

Hi thanks for your feedback. Where do I say it's a 400 pounds mono line? In fact the subtitles on the video, actually say that it's a weed cutter line. If you go to a gardening store, you will see them in several sizes, colors and shapes. If you actually seen the entire video, I feel there's no way you can make that assumption. So I don't get you question and your comment on having subtitles. But I guess that was something that you just had to say right. O well, give it a try you may like the result and be a little bit happier with your life.

@bobcary7780 5 лет назад

Check out this link to ideas you might like for your kayak. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WanBBscQN3w.html

@geraldfranz9085 4 года назад

Cool ideas brother Bob, thanks for sharing. Might use those hacks on my SUP, lol. 😎👍✌🐟💥🛎

@tomsergesketter5138 5 лет назад

Awesome! Can you come to my house? 😀

@JTAKayakFishing 5 лет назад

Thanks, but there is no need, you can do this on your own

@tomsergesketter5138 5 лет назад

JTA Kayak Fishing I guess if I put my mind to it. Looks complicated. Thanks for sharing!

@JTAKayakFishing 5 лет назад

@@tomsergesketter5138 After you get the materials needed, it's actually really easy and simple. You'll get the hang of it in no time.

@GrymmTymm1313 4 года назад

What knife was that you had leashed to your yak?

@JTAKayakFishing 4 года назад

Hi :D, That's just a scuba diver knife that I got for 10€. It's nothing special. But its going on for 3 years in saltwater environment and it's still kicking :D

@GrymmTymm1313 4 года назад

@@JTAKayakFishing what knife is it though?

@JTAKayakFishing 4 года назад

@@GrymmTymm1313 Sorry for the delay in my answer, I was trying to find it on the internet by picture, and I realised I could just see if the knife and anything written on it :D It's the "smith&wesson H.R.T." Hope it helps :D

@Thalarctos. 6 лет назад

6:56 comment s'appelle cette pièce en métal ?

@JTAKayakFishing 6 лет назад

Bonjour, je n'ai aucune idée du nom. C'est peut-être un anneau en aluminium, une quincaillerie doit avoir.

@Thalarctos. 6 лет назад

► JTA : ► JTA... : thank you for your reply ;-) pb+Abo.

@fabiopressao-PE 5 лет назад

👏👏👏👏👏👏👏👏👏👏

@wayned5872 5 лет назад

Nippers to crimp a lug? Not good.. go buy a set of crimpers

@tombosanko3085 2 года назад

Needs to add comintery so we know what's happening if we want to go and get the stuff to do it ourselves

@JTAKayakFishing 2 года назад

Did you even watched the video?? Because what you are saying kinda feels like you haven't.

@TheWingnut58 2 года назад

Yeah, we all watched the video and listened to the shitty background "music".... But most people want INSTRUCTIONS from a "how to" video, not fast forwarded half assed "look what I did" bullshit.

@theguywitheyebrows Год назад

@@TheWingnut58 ...seriously? poke a couple holes in the ends of a stick, wrap the line around the stick with both ends secured in the stick, dip into boiling water for some time, create loops on the ends, heat shrink tubing for aesthetics, add clips, use to keep your shit outta the water....

@TheWingnut58 Год назад

@@theguywitheyebrows yes, seriously....the title says HOW TO and there was no instructions. And BTW, I've been making my own for decades....the title just sucks, so go FY....

@motleypixel 4 года назад

Great, but missing MANY critical things that ALL DIY videos include and they are specifics, sizes, lengths, diameters, material types, tooling specifics, etc., etc. I appreciate all youtubers taking the time to record, post process and publish, but this is NOT a DIY video, it's a show-"off" and tell at very least.

@motleypixel 4 года назад

@President Funny Valentine D4C common sense tell me you couldn't make the "identical" leash in the video if your life depended on it...why?...because like I said, he doesn't give any specifics, sometimes abbreviated "specs". I guess you never care to read specs in the index about products.

@rustafar_2354 3 года назад

@@motleypixel You must not have any imagination or can't think for yourself. which is it ?? Choose one.

@motleypixel 3 года назад

@@rustafar_2354 I "think" he left out elements that are fundamental to DIY videos; thus, it's not a DIY video. @russ peck can you not read my original reply or did you just jump to this conclusion w/o reading it?

@walpemberton8819 5 лет назад

Found this system very annoying to Use the coils tangle around everything .3mm bunnies cord is far better

@JTAKayakFishing 5 лет назад

Check out my other videos were I'm actually fishing and see how I do it. Maybe you can get the idea of how to use them without tangling everything up. But whatever works for each of us right 😀

@mfischer78219 5 лет назад

that looks like wayyyyy too much work when I can just buy real ones on Amazon...JMO

@JTAKayakFishing 5 лет назад

Has opposed to this ones that are fake? But don't even stress about it, here you go: bit.do/eBxZT Thanks for the feedback :D

@angelomejias9906 5 лет назад

Matt Fischer now that’s what u call handmade....quality at it best.

@JTAKayakFishing 5 лет назад

Thanks, at the very least it's more gratifying :D

@jckdnls9292 4 года назад

Would be better if u actually explained the materials and process...

@JTAKayakFishing 4 года назад

what more do you think i could have done? How would you have explained the materials and the process? Cause I'm thinking that I explained the nylon weed cutter, the metal tube, and the crimps. And I made an entire video showing how I did the process from start to finish. So I'm curious on what you would have done different.