Тёмный

DIY Install of Tuff Country  

Tacoma Mod XELA
Подписаться 3,2 тыс.
Просмотров 1,2 тыс.
50% 1

This is part 2 of 2 DIY installation video of the Tuff Country #51025 Leveling Kit Rear (AAL) system for the 3rd Gen Toyota Tacoma TRD Pro. This shows the step-by-step installation of a an add-a-leaf spring to gain 1.5" lift on the rear suspension. Please check out my video on part 1 of this 2-part video which covers the installation of the strut spacer for the front suspension here: • 3rd Gen Tacoma Install... Please note that this leveling kit is made for TRD Pro trim only.
PRODUCT LINK:
Tuff Country #51025 Suspension Lift System - www.4wheelparts.ca/p/tuff-cou...
Thanks and until the next video!
Alex (modXELA)
DISCLAIMER
I do not endorse nor am I compensated by the companies of the products that I install or the tools that I use. The sole purpose of my videos is to show you my installation approach and share ideas that I have. I am not a professional or an expert in these subject matters but rather, just self-taught. The information that I share in my videos are from my personal experiences and personal opinions, researched materials from manuals or internet documents, and from blogs or forums that may not be 100% accurate. Please do your own diligence to ensure correct product fitment when purchasing via any links that I may provide by verifying with manufacturer or dealer. I am not responsible for information provided here that may cause any damages or financial loss. Changes, omissions or additions maybe performed without notification and I reserve the right to make these changes without notice or obligation.

Авто/Мото

Опубликовано:

 

14 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 15   
@outdirtlife9392
@outdirtlife9392 2 года назад
Great install video, thanks for sharing!
@modXELA
@modXELA 2 года назад
Thanks for watching!
@S.-.V
@S.-.V Год назад
Anyone ever done this while replacing rear leveling blocks? Previous owner put blocks but I’d rather have the addition leaf I think.
@tachoma8493
@tachoma8493 2 года назад
👍👍A detailed install Ninong ano po ang floor jack na ninyo ?
@modXELA
@modXELA 2 года назад
Nothing special, it's just a low-profile 3-ton jack that I got from Costo. Now Costo has a CAT 3-ton rapid-lift so palitan ko para mabilis! =)
@kennlifts
@kennlifts 2 года назад
You’re awesome
@modXELA
@modXELA 2 года назад
Thanks Kennedy! I appreciate you tuning in.
@kennlifts
@kennlifts 2 года назад
@@modXELA I have a 2018 TRD sport myself and I plan to add a 3 inch rough country lift soon!
@modXELA
@modXELA 2 года назад
@@kennlifts nice! The 3" lift was out of the budget so my 1.5" levelling kit was a band aid fix just to get rid of the tire rubbing. It's worked out well so far so I'll probably keep this setup for a couple of years or until I have to. Good luck with yours. Do you IG? Would love to see photos of your truck.
@sakutasu
@sakutasu 2 года назад
My rear is sagging on my 2017 Tacoma long bed. I plan on getting either a Tuff country of Torch AAL . Did you get a measurement after the AAL's settled ? Thanks.
@modXELA
@modXELA 2 года назад
Hey Kim, I'm offroading today and will be home tomorrow afternoon so I'll measure it for you when I get home. I also have my RTT mounted so I'll take it down in order to get accurate and proper measurements. Will let you know tomorrow.
@sakutasu
@sakutasu 2 года назад
@@modXELA Thanks !
@modXELA
@modXELA 2 года назад
Kim, I managed to take measurements but was unable to remove my RTT. With my RTT and awning mounted (combined 150lbs), rear measured at 37-3/8" and front at 37". Looks like the front hasn't changed at all but the rear dropped by a little over 0.25". I suspect that this is due to the load but overall, it's not a big drop.
@parkermoore9461
@parkermoore9461 2 года назад
Great video. How are you liking the wheel spacers from KSP? Any vibrations or any other complaints ?
@modXELA
@modXELA 2 года назад
The spacers are great, I can't complain about anything (knock wood). The ride is smooth and I got the opportunity to check the state when I did my lifts and they're holding up pretty well... no cracks, no movement, looks solid. =) thanks for tuning in Parker!
Далее
The Best Way To Lift Your Tacoma? Block or AAL?
19:33
Add-a-leaf Kit (Tacoma DIY / How To)
10:46
Просмотров 68 тыс.
Ручка из шланга, лайфхак
00:11
Просмотров 15 тыс.
PART 2 How to Add a Leaf without removing spring
3:04
Просмотров 100 тыс.
Bilstein 6112 and 5160 Shocks 3 years later
9:50
Просмотров 112 тыс.
DIY FAIL! No Crank Nissan Sentra
36:39
Просмотров 118 тыс.
Add-a-leaf Kit VS Rear Lift Block: Rear Lift Kits
8:13
Changing Wheel While Driving 😳
0:24
Просмотров 14 млн