No video :(

DIY Kirlian Photography(FULL PROJECT DETAILS)

Подписаться 607 тыс.

Просмотров 146 тыс.

50% 1

How to make a Kirlian high frequency high voltage photographic plate in this step by step video. Enjoy!
Link to the High Voltage drive circuit shown in this video:
• Ignition Coil Driver &...
**For great prices(Usually LOWER than EBAY) on all kinds of electronics, household items, drones, Arduino, and MUCH more, please refer to the link below! Your purchase supports my channel.
bit.ly/28ShZ5J
*Save money with this coupon code: DOLLARDIG
*Or this code to save 8% if you buy "Measurement/Analysis" items: MEASURE
DISCLAIMER: HIGH VOLTAGE circuits shown on this channel are for educational/experimental purposes only. Duplicate and use AT YOUR OWN RISK. This channel will not be held liable for any damage or death resulting from the use of this device. Safety is a primary concern when working with high voltage.
Thanks For Watching!
Support the creation of more electronicsNmore videos:
www.patreon.co...
**If you enjoy watching my videos, please show your support by SUBSCRIBING, POSTING LINKS to my videos on other websites & blogs, rating a "THUMBS UP", and watching my video playlists. Doing so helps to ensure that many more videos will be released in the future. (Views are essential to ensure this channel remains in an active state)**

Опубликовано:

23 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 198

@ozgemmo3445 8 лет назад

Hi mate - I was interested in Kirlian photography in the 1960's - 70's; if you want to be blown away with it and seeing an organic object's life force representation [my explanation] repeat your experiment with any fresh leaf, photograph it and then physically cut the leaf in half across the short axis of the leaf and repeat your experiment! Not sure if your system will show this phenomenon or not but what I saw with the half-leaf image was the complete corona for the whole leaf and you could clearly see the half leaf outlins against the full leaf corona! Simply amazing and as a now retired scientist still difficult to explain or understand this effect. You can experiment with any number of different substances and the coronas are all different. keep up the really great work and cheers from Down Under.

@PeteVanDemark 7 лет назад

Try same with a feather then cut 3/4" off the tip and check it again.

@zeitGGeist 6 лет назад

the trail left is fro water on the glass. to do this properly, would would need to measure, cut the leaf, then measure using a DIFFERENT plate and you'll see there is no left over "life residue"

@TBrewer64 6 лет назад

It's water vapor leaving the leaf. Not some mystical life aura. You could soak a synthetic sponge in water and it would also have a Kirlian aura.

@pumpkinking365 6 лет назад

zeitgeist That was also my thought, the only reason I would make one of these was to test that theory out.

@giobeshe 5 лет назад

Thats not true. Scientists have already proved that it is not water vapor by using different materials.

@Jorge-or3fr 2 года назад

GREAT EXPLANATION! You got mi like! Please let me know if I can place my whole palm and in case I can how to do it, I mean I think you said that you put your fingers under the foam.... but I really do not quite get the picture exactly of what you mean. Thank you!

@mark879 8 лет назад

Damn, that's really pretty! I am going to make that my new background image.

@electronicsNmore 8 лет назад

No problem. :-)

@miguelcastaneda7236 8 лет назад

remember this stuff was big back in 1960s.....anyone remember what was the device used for recording sound from plants...its outside human audio range wanna build one

@krikette 5 лет назад

There's a documentary called secret life of plants if I recall that shows plants hooked up to lie detectors and studied their emotional responses to lab techs doing messed up things in their presence lol. And also a documentary somewhere that had an Asian lady with a plant hooked up to a speaker and she was teaching it how to say alphabets.. some others hook them up to speakers and they'll sing and harmonize with each other naturally

@yellowbooktelevision4529 4 года назад

eden how does one hook up a pant to speaker(s)

@PridelessChickz 3 года назад

@@krikette whoaa whaaaat

@BillAnt 3 года назад

Not to detract from this project as it's super cool, Photoshop has a Kirlian camera effect filter able to turn any object into a near perfect replica. ;)

@pietroagostoni2417 3 года назад

@@BillAnt Really? Where? Can't find any infos about it

@chorton53 Год назад

Your video was so helpful. Thanks.

@electronicsNmore Год назад

Great to hear! Thanks for watching

@Kniffel101 8 лет назад

Actually doing the single steps while explaining it would be very nice and appreciated! ;)

@electronicsNmore 8 лет назад

Hello there. No reason to do that because I explained it very well to viewers. You should not have any problem making this. Unfortunately I cannot spend too much time making a video which only gets a few thousand views. When I see a large increase in viewers per video, that may change. Thank You

@nicholastenney2690 6 лет назад

You should spend more time and make a more detailed video in order to get more views!

@PHOEBUSDANCER 6 лет назад

Kniffel101 OR or or you could just follow the SIMPLE, detailed, and easy instructions he so kindly provided.

@cassvirgillo3395 8 лет назад

Hi EnM Doug, Very cool demonstration and build. Maybe a good nickname could be Sparky, just kiddin'. Looks like a neat way to get some nice photographs. I like the coil HV method over the fly back transformer, way easier to work with. Happy 4th, C.

@electronicsNmore 8 лет назад

Glad you liked the video. Happy 4th.

@Moukass 4 года назад

Wow the results are amazing!! Do you have photos of people or animals with this technique?

@electronicsNmore 4 года назад

Glad you enjoyed the video! You can only take pictures of small objects pressed up against the glass.

@BillAnt 3 года назад

Next, I'm hooking up my poodle to high voltage. he-he jk

@13hubi13 3 года назад

@@electronicsNmore how is it possible to photograph people, saw a photo of that somewhere in the internet.

@tectalabyss 8 лет назад

Late but I very much enjoyed this video well done and explained has always. All my best. Bobby

@donjayamaha6174 23 дня назад

Hi do you need to use the ground Will it work without ground

@CaptKROD Год назад

That is a very cool set up. Is there a way to take a Kirlian photo of an orgonite? I would love to be able to test them to see if there is actually an energetic quality about them.

@sensina261 Год назад

my thought exactly!!!

@lloydprunier4415 8 лет назад

Have to give this a try. Would something like the leaf work better if the ground was spread out? With a piece of screen wire or something similar?

@electronicsNmore 8 лет назад

You could try that. Maybe a small piece of damp paper towel under the leaf.

@MrGuitarguru95 3 года назад

Thank you for this 📈🧙‍♂️

@electronicsNmore 3 года назад

My pleasure!

@SuperArchi2010 2 года назад

Very good staff I would have a question for you If you OK Can we have some chat on the specification and the set up??

@jkmacgyver 8 лет назад

At these frequencies most of the coupling is capacitive, so isolating yourself from earth is only part of the game! Very neat photos!

@kengamble8595 8 лет назад

I must say, that sure gave me a lot of ideas ! VERY COOL, THANKS ! 👍

@electronicsNmore 8 лет назад

Be sure to share and rate thumbs up. Thanks!

@kengamble8595 8 лет назад

+electronicsNmore Done and done ! ✔

@shubhkarman859 Год назад

is wire completing a circuit, mean connecting on end making rectangle

@junkman8742 5 лет назад

I think I got the electric driver for one of these at an auction for a new age lady. She also had old books on kirlian photography. It is a box with ac plug for wall. Maybe one knob. Switch. And a wire with clips coming out. When turned on a blue arc pulses over the clips and I felt it in my hand holding the cord. Makes the same buzz. Am I safe guessing that is what this device is for?? Thanks

@electronicsNmore 5 лет назад

Sounds like it based on the books you found with the device.

@stevenchiverton48 Год назад

how do you get the coper wire to stay in place before you put the top glass sheet on top i arsked this qestion ages ago down page and it was never anserwed so if anyone wants to build this try giveing more anserws to it

@ravichristian6364 2 года назад

very good

@electronicsNmore 2 года назад

Thanks!

@josebarbosagarcia550 3 года назад

can someone please breakdown the items we need to build one of these. It doesn't have to the one right above but can be the material names, sizes and any insightful things. Thanks

@r0sewat3r 3 года назад

i am also searching for this.

@dawncawthra3519 3 года назад

Wow, thank you

@electronicsNmore 3 года назад

You're welcome! Please share. Thank you

@InluxBDX 3 года назад

Very cool project!. One question: the color aura, you choose or it depends on the current/voltage or something else?

@electronicsNmore 3 года назад

It's almost always that color, but some objects can alter the color. A penny, due to the copper content, can make the glow appear green. Thanks for watching!

@TheNavalAviator 6 месяцев назад

Think this could work with a capacitor?

@Zymybu75 8 лет назад

Hey, I really like your video. I am going to build my own Kirlian photography device too, I was wondering if it is also possible to use plastic plates instead of glass plates? Would be great if you could help me. Also, did you use salt water or just water ?

@electronicsNmore 8 лет назад

Never tried plastic. Better stick with glass. I used tap water.

@Zymybu75 8 лет назад

Okay, thanks for your fast reply. Where did you get that glass from? On the first look it seems to be hard to find not too expensive ones.

@jacobeller2192 5 лет назад

Was just wondering if the glass could be bigger as I am having a hard time finding the glass plates in that size. Also could acrylic work as a glass substitute? Thank you for posting this video btw!

@electronicsNmore 5 лет назад

Yes, but I would go to your local hardware store and have them cut the window glass to size. Be sure to watch my other videos and most importantly share my channel with others. Thank you!

@mrjohhhnnnyyy5797 8 лет назад

Good craftsmanship, you can use the rig over and over for years :)

@electronicsNmore 8 лет назад

Thanks!

@helencazareswriter77 5 лет назад

Very nice thank you

@electronicsNmore 5 лет назад

Thank you! Be sure to check out my other videos and share my channel with others.

@Lunartrek 7 лет назад

What kind of camera do you use for taking these pictures? I want to get my own supplies and do this myself.

@electronicsNmore 7 лет назад

Lunartrek I use a Nikon S-6800

@RealGlowup 4 года назад

Lunartrek how are you translating the information to the camera? How does this work when people are photographing a person (aura photos) they’re not laying against a plate. Any ideas?

@MadanLal-mo4iy 3 года назад

क्या मुझे इसके बारे में हिंदी में कोई पुस्तक या जानकारी मिल सकती है

@phonenew789 2 года назад

Could you use pdc instead of ac? Does frequency play any sort of role?

@goodwillhuntingegypt 6 лет назад

Hello, could you please tell me the type of camera you used to capture these photos in dark?? and if there're types you recommend??, thanks.

@electronicsNmore 6 лет назад

My camera: amzn.to/2LjvRIF

@goodwillhuntingegypt 6 лет назад

thank you

@OhCheshireCat 7 лет назад

I didn't get exactly how you made the photo, also 6400 ISO settings wouldn't show too much noise in the picture? Thank you so much for this project explanation, can't wait to do that!

@electronicsNmore 7 лет назад

I took a photo using my tripod on the timer setting. That's all I remember.

@IndiePsySieve 8 лет назад

Thank You so Much.

@electronicsNmore 8 лет назад

You're welcome! Be sure to rate thumbs up, subscribe, check out my video playlists, and share. Thanks

@MrDieFischblase 7 лет назад

Thank you for sharing this Project. How high is the salinity of the Water?

@electronicsNmore 7 лет назад

I never tested the salinity.

@diofan84 2 года назад

Hi. How do you apply this for portrait photography?

@Nielsquake0 2 года назад

hmm, only way I can think of is a 3D printed lithograph of the portrait to give a charge differential for the peaks to appear. maybe lightly coat it with conductive ink for better effects :D

@vickramchouhan1463 Год назад

Where to buy a kirlian photography camera??

@budude2 8 лет назад

Very cool indeed!

@electronicsNmore 8 лет назад

Glad you enjoyed the video Brian. Be sure to rate thumbs up and share with others. Thanks!

@ygreq 7 лет назад

Did you touch the ground when using your fingers instead of objects? Any more info I should know if I want to use hands or body? Safety related? :)

@electronicsNmore 7 лет назад

Cristian Iordache Hi Chris. Only place objects on the plate, keep fingers away to avoid shocks. Thanks for watching!

@saunaportatil_alchemy 4 года назад

Hi there. Did you just add plain water into the plate? Is it not better to put water mixed with salt?

@electronicsNmore 4 года назад

Tap water

@mark879 8 лет назад

Hey, you said there was water between the two glass plates. right? If so, is it just tap-water or are you using something special here?

@electronicsNmore 8 лет назад

Hey Mark. Yes, only tap water between the plates.

@jpmvidal 4 года назад

When you're touching the glass, where do you connect the ground wire attached to the negative of the battery?

@electronicsNmore 4 года назад

You don't, just use your hand on the plate.

@filigenzilab9613 5 лет назад

What differnece is shown between living organism and inanimated objects?

@FunnyVideos-wt4xf 4 года назад

Is it compulsory to use water filled in plexiglass or can we use copper plate??

@electronicsNmore 4 года назад

Yes, do as shown in the video. Thanks for watching!

@Boss19666 8 месяцев назад

I want to buy this where i to buy

@pweis79 2 года назад

Do you sell any of these set ups that are already put together and ready to go?

@electronicsNmore 2 года назад

No Phil

@brendananderson324 8 лет назад

thank you so much MEEPhDIEB

@AliensInc. 8 лет назад

now THAT was c00l :)

@Metaldetectiontubeworldwide 8 лет назад

awesome , would love to photograph my 1578 goldcoin , i found. but i'm affraid that the positive pole would damage the coin .... although gold is also used on connectors ???? what do you think ,? gonna try to make it anyway so cool ! grtzz john

@electronicsNmore 8 лет назад

If you did it quickly and snapped a photo, I think you'd be OK. Up to you. Try another coin first. Thanks For Watching!

@Zymybu75 8 лет назад

Hey, yesterday I realized that my copper wire is enamelled.. Now I am worried that this doesnt work. The copper wire has to be connected to the water to create an electrical field right ? Can also be used silver wire ?

@electronicsNmore 8 лет назад

You must use bare copper or silver wire.

@erinlewis7573 2 года назад

could i use an 12V inverter instead of the coil? Like the kind used to drive electroluminescent film.

@electronicsNmore 2 года назад

As long as the output is very high voltage and high frequency. Look up the specs for Kirlian photography power supplies.

@amandamccourt1942 4 года назад

Have you tried wetting the sponge and giving it current?

@electronicsNmore 4 года назад

You don't want the sponge to conduct, it will ruin the photo.

@motorhead6763 8 лет назад

Hello...can you recommend a good pocket oscilloscope ? I do automotive and marine tech and often need a small scope.Thanx

@electronicsNmore 8 лет назад

Hi there. The scope I use is a Velleman HPS-50(Around $250). I like it a lot, the only problem is, it only has one channel, and it is not really "Pocket Sized". A very nice, compact, 4 channel scope(Over $100 less) that has all high buyer satisfaction ratings would be the one shown below. If you decide to buy it, I can supply a coupon code for you. www.banggood.com/Nano-DSO203-DS203-Professional-Digital-Oscilloscope-4-Channel-72MSs-p-925667.html?p=U627203391019201512Z Thanks

@billybaty8911 6 лет назад

When you said it only works using AC current, did you really mean DC?

@electronicsNmore 6 лет назад

The ignition coil requires pulses to drive it. Pure DC does not work. Thanks for watching!

@johnnyfivefifty 3 года назад

@@electronicsNmore I use a 50mm spark coil using an interupter. It's pure pulsed DC. No AC here and it works like a charm.

@Boss19666 7 месяцев назад

I want to purchase charges

@marko19062 3 года назад

Hi, when you put fingers, do you have to put ground wire on hand?

@electronicsNmore 3 года назад

No, you'll get a bigger shock. LOL

@marko19062 3 года назад

@@electronicsNmore so, you just have to put fingers on top of the glass?

@marko19062 3 года назад

@@electronicsNmore I made this and it works, but i haven't tried my fingers, so can you tell me how to do it with fingers

@karnevil999 4 года назад

Is it true that if you cut the leaf in half, the resulting image would still show the shape of a full leaf?

@electronicsNmore 4 года назад

@karnevil999 4 года назад

Thanks. Didn’t think so, but that’s what I’ve heard.

@amandamccourt1942 4 года назад

Can You explain the " Ionic Lift" effect? And how to make one?

@electronicsNmore 4 года назад

Hello Amanda. Check out Rimstar org on YT. He has a good video. Thanks for watching!

@brendananderson324 8 лет назад

so you figured out Solar Photography, Blacklight, Artificial Sun Projection, Cloaking Device, and how a Multiverse/Universe looks

@electronicsNmore 8 лет назад

:-). Not me, Semyon Kirlian did!

@brendananderson324 8 лет назад

+electronicsNmore bless you anyways man, your up there with the World Electric Experts i look up too

@shikhapatelsohamhealingtemple 4 года назад

Kya ye app banake sell kr sakte he

@pspkutube 4 года назад

I don't think Kirlian photography is about capturing Corona discharges... at least that was not how it was done when I had my photo taken on several occasions...

@ARBB1 4 года назад

It was. Kirlian photography is utilized to find tumors and other such things specifically because the discharges can mark the outline of the different tissues and so on.

@silviapares2606 7 лет назад

Could this device work being powered by 5 alkaline batteries of 4,5 V connected in parallel to reach the 20 V required?

@zeitGGeist 6 лет назад

no reason why not. thats how electric works.

@milesjag 6 лет назад

20Kv required so you'll have to get 4,500 of them. Also DC

@bobdole27 Год назад

So its really AC only right to get the effects?

@electronicsNmore Год назад

Pulsed DC

@bobdole27 Год назад

@@electronicsNmore Thank you

@MARKOSILLYPIG 4 года назад

Does it have to be glass or can you use perspex?

@electronicsNmore 4 года назад

Use glass.

@varunsam9947 4 года назад

what is the frequency rating used in this circuit? because im working on this project but im using a transformer

@electronicsNmore 4 года назад

In the 10's of khz.

@bellabates4512 2 года назад

So… how long does one leave hand on plate?

@electronicsNmore 2 года назад

Momentary just to take a picture.

@mountainguru8546 7 лет назад

Does the room smell like a thunderstorm? It is built like an Ozone generator the main difference is the distance between the contacts.

@electronicsNmore 7 лет назад

Hi. Not too bad, but you can smell the ozone.

@vivekgogate3068 4 года назад

Which camera do you use to take photos?

@electronicsNmore 4 года назад

Nikon S6800

@rahulwadate8754 5 лет назад

What is the thikness of the glass ? Copper wire is between two glass right?

@electronicsNmore 5 лет назад

20-24ga solid copper wire is fine, 1/16" glass, and the wire is between the 2 glass plates.

@rahulwadate8754 5 лет назад

@@electronicsNmore Can i use EHT/ Flyback transformer instead of ignition coil?

@electronicsNmore 5 лет назад

@@rahulwadate8754 I suggest using what I show.

@induraja9542 2 года назад

How to u make please explain

@rajeshkhanna1440 4 года назад

Please inform me the prise of a Kriliyan photography camera still & video camera and address & contact person.

@electronicsNmore 4 года назад

If located in India, I don't have any links.

@Alexelectricalengineering 8 лет назад

Thumbs up :)

@electronicsNmore 8 лет назад

Glad you liked the video!

@Alexelectricalengineering 8 лет назад

electronicsNmore 👍👍

@timelessrejuvenationcenter Год назад

Do you have any pictures of a human picture?

@CivilizedMenKilledMe 3 года назад

A real Kirlian camera if you put a plant branch missing a leaf, it appears until the heel of that missing leaf. If you photograph a gecko with its tail amputated, the aura of that tail also appears.

@alchemist6107 5 лет назад

Would you sell your DIY Kirlian Projekt... ? it would be grat :-) because i can't do it on my self... or someone else?

@electronicsNmore 5 лет назад

I need the one I made for other projects/new videos. Be sure to watch my other video below. Thank you! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2UmkyOcYBEk.html

@shubhkarman859 Год назад

can i just buy 1 from you

@raphaelpereira4062 5 лет назад

What is the current it drives?

@electronicsNmore 5 лет назад

12V power supply, up to 1A

@Guy-mx4fb 5 лет назад

Is this safe, with the electricity

@electronicsNmore 5 лет назад

You can get a nasty shock, but you should remain alive. :-) Be cautious.

@thanhluan95 4 года назад

@@electronicsNmore Hi bro. i have a 20kv shock looklike this. But 20kv can cause death ? or ?

@popcoron11 2 года назад

これは電磁気学を利用した、【アート】ですね。太陽のコロナ放電にも見えます。

@soumendrasingh1 5 лет назад

Basically u r making a dielectric barrier discharge..

@joelmosier125 Год назад

I witness seeing the Aura on my skin, on an Egg or any other inanimate object at night with a little bit of light. It looks of a very faint blueish color of small, electric static explosions, yet only at night can I see it along with the Gravity lines at dusk in the Northwest. Sun-Sunlight causes gravity and All matter is Positive and Negative charges, Air is a positive charge and looks the same as the (Aura a positive charge) on your skin. All Terrans can see this I am J.Terran the only Terran to be born on Eden/Earth 53 years old. When you are able to attract those Surplus magnets from the Sun-Sunlight that cause gravity in a 5 year period you are able to STOP the aging process due to gravity caused by Sunlight.

@Corpst 6 лет назад

How much does one of these cost to make? And would you be willing to make one for me and I’d pay you somehow for it?

@electronicsNmore 6 лет назад

It didn't cost me too much money because I had almost everything laying around. I appreciate the offer, but I don't have the time to make these. Thanks for watching!

@shikhapatelsohamhealingtemple 4 года назад

App hindi me bhi ye vedio banay 🙏plzzzzzzzzz

@adambeecroft9305 4 года назад

strange, same color a sigil appears in scrying

@prakashdash1940 6 лет назад

what is the cost sir ?

@electronicsNmore 6 лет назад

All depends where you buy the items, and what things cost where you live. Thanks for watching!

@actorboy6874 4 года назад

Use this to take pictures of the human aura and chakras

@electronicsNmore 4 года назад

This plate uses it's own energy.

@luisrayomix 4 года назад

me asuste cuando vi la bobina hehehehe

@electronicsNmore 4 года назад

😂 ¡Gracias por mirar! Por favor, comparta.

@707Pelican 4 года назад

how can a metal key have more aura than a person?

@electronicsNmore 4 года назад

Metal is a great conductor. Skin moisture content has a lot to do with it. Thanks for watching Chris! Be sure to look over my extensive video playlists below for many other videos of interest to you, use supplied Amazon links to support my channel when making purchases(No added cost to you), and share links to my videos with many others on social networking sites. Stay safe ru-vid.complaylists

@user-rf4bj4wt7z 6 лет назад

СУПРУГИ КИРЛИАН И ИХ ИЗОБРЕТЕНИЕ. Составитель Лотоцкая В.А. Краснодар: ООО"Просвещение-Юг" 2008 drive.google.com/file/d/1alIsZ96xI5Lpb9nZLwsLqdyuKk0fKM0v/view?usp=sharing

@nareshjoshi123 6 лет назад

can v get pdf in English plz

@user-rf4bj4wt7z 6 лет назад

@@nareshjoshi123 We can not translate it now. Please translate it to you with help of google translate.

@nareshjoshi123 6 лет назад

hello thanks i have got this documentary in English

@nareshjoshi123 6 лет назад

my interest to detect acupressure point by this method i mean to say meridian of acupressure point on body , i am pharmacist also having little knowledge about bio medical instrument