Тёмный

DIY Knotty Pine Book Shelf | NATHAN BUILDS 

Nathan Builds
Подписаться 45 тыс.
Просмотров 50 тыс.
50% 1

Today we are going to make this bookshelf out of a piece of kiln dried knotty pine that I got for $18 from my lumber yard.
I used a bunch of different tools, but you can make a simpler variation of this easily with just a circular saw.
Plans are here: bit.ly/bookshel...
Instagram: bit.ly/nathanbu...
PLEASE subscribe and hit the thumbs up! I am definitely still learning, but that is what makes these videos fun! Help me get better by commenting with tips, advice and suggestions.
Thanks!
---
Here are links to the different tools I use in general. Purchases made through the following links may support this channel!
POWER TOOLS
- Table Saw - DEWALT DWE7491RS: amzn.to/3bn4UQi
- Miter Saw - Metabo C10FCGS: amzn.to/3ckdqAJ
- Drill/Driver/Circular Saw Set - Porter-Cable PCCK617L6: amzn.to/3fzo9JE
- Drill/Driver Only - Porter-Cable PCCK604L2: amzn.to/2WitsFN
- Finish Nailer - Porter-Cable 16GA PCC792LA: amzn.to/3bjRFjo
- Circular Saw (corded) - SKIL 5280-01: amzn.to/3fzl9x4
- Track Saw - Kreg ACS-SAW: amzn.to/3fyxyRV
- Benchtop Planer - Dewalt DW734: amzn.to/3bcVQxq
- Jigsaw - Bosch JS470E: amzn.to/2YReLv4
- Router - Bosch PR20EVS: amzn.to/3fyw5uM
- Oscillating Tool - Bosch GOP40-30C: amzn.to/2Ls151X
- Orbital Sander - Dewalt DWE6423K: amzn.to/2xP9Ob3
- Angle Grinder - Porter-Cable PC60TPAG: amzn.to/3cfpO58
HAND TOOLS
- Pull Saw - SUIZAN (6”): amzn.to/2AhUwN7
- Pull Saw - SUIZAN (9.5”): amzn.to/2WFZKK3
- Hand Plane - Taytools 468273: amzn.to/3fywJZe
- Hand Plane - Taytools 469614 (#4): amzn.to/3bh2UJu
ACCESSORIES/ OTHER STUFF
- Table Saw Miter Sled - Kreg KMS7102: amzn.to/2WFWhv1
- Table Saw Blade (all purpose blade) - Diablo D1050X: amzn.to/
- Circular Saw Track - Kreg KMA3700: amzn.to/2WIfDzC
- Track - Kreg ACS 62” Guide x 2: amzn.to/3dAHM2p
- Track Connectors - Kreg ACS Track Connectors: amzn.to/2WKykTh
- Pocket Hole Jig (entry level) - Kreg Jig R3: amzn.to/2zujqID
- Pocket Hole Jig (heavy duty) - Kreg Tool K5 Master System: amzn.to/2LdTVOm
- Doweling Jig - Milescraft 1319 JointMate: amzn.to/3bj7Hdd
- 90 Degree Clamp - Kreg KHCRA: amzn.to/2WhcKGQ
- Bar Clamps - Jorgensen: amzn.to/3bhYFNF
- Pipe Clamps - Bessey BPC-H34: amzn.to/2zlKr18
- Speed Squares - Swanson 7” and 12”: amzn.to/3fBAb5u
- Saw Horse - WORX WX065: amzn.to/2SQ9kbT
- Router Base - Bosch PR011: amzn.to/2SLjQkT
- Router Edge - Bosch RA1054: amzn.to/3cq0Wba
- Sharpening Stone - Trend Diamond Stone: amzn.to/2SQDw73
- Pocket Knife - Zero Tolerance 0350: amzn.to/2SSMhgC
ELECTRONICS/ SOFTWARE
- Camera - Cannon EOS 60D: Get something newer if you are buying now!
- Microphone - Yeti Blue: amzn.to/2YOqdI0
- Lapel Microphone - Rode Wireless Go: amzn.to/2LhD5ya
- Headphones - Samsung Buds+: amzn.to/35MekUd
- Video Editing - Final Cut Pro X: bit.ly/FCPXNB
- CAD/Design - SketchUp 2017 Free: bit.ly/SketchU...

Хобби

Опубликовано:

 

25 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 43   
@crucklewooddesigns8139
@crucklewooddesigns8139 10 месяцев назад
Looks good
@TranTheClever
@TranTheClever 4 года назад
Turned out amazing Rach! I wish I had somewhere for one of my own 😍 Also I feel you with the Cali sass - Belle has got some serious attitude today! 🐶🙄 2:39
@mulekickhandmadeguitars8465
@mulekickhandmadeguitars8465 4 года назад
Just wanted to convey a little of my experience with knotty pine, which I use regularly. First, I avoid buying pine boards with those long narrow "spike knots" in them, since they always seem to cause the wood to do crazy stuff. Second, I don't ever start my project the same day I buy the boards. I buy the best boards I can find, and store them inside my shop for about 2 weeks before I ever cut into them for my project. This seems to allow the wood to acclimate, and it minimizes a lot of wood movement later on. It's better to know if the wood is going to warp, bow, cup, and twist BEFORE you assemble your project. And, truthfully, it's pretty hard to find really good boards when using #2 common pine. You just learn how to work around the flaws.
@NATHANBUILDS
@NATHANBUILDS 4 года назад
Great advice, thanks Mike!
@jp_makes
@jp_makes 5 лет назад
Nice one, looks really good!
@NATHANBUILDS
@NATHANBUILDS 5 лет назад
Thanks for watching JP!
@JuanCarlos-qb1tu
@JuanCarlos-qb1tu 5 лет назад
NathanBuilds can you put measurements I can’t get to the plans
@NATHANBUILDS
@NATHANBUILDS 5 лет назад
@@JuanCarlos-qb1tu Sides: 24” x 10” x 3/4” Top: 18” x 10” x 3/4” Middle shelf: 16 1/2” x 9 3/4” x 3/4” Bottom shelf: 16 1/2” x 9” x 3/4” Front bottom trim: 16 1/2” x 2” x 3/4” Back panels: cut to fit based on your routing
@barbkeen1221
@barbkeen1221 5 лет назад
Great job! Simple and easy! 🙂
@NATHANBUILDS
@NATHANBUILDS 5 лет назад
Thanks Barb! I'm excited for my bigger bed build that is coming soon. These smaller projects are fun but not quite as satisfying!
@barbkeen1221
@barbkeen1221 5 лет назад
@@NATHANBUILDS So true! But think of this as a warm up to your bigger build!! I can't wait to see the bigger bed and btw, I love your trash can workbench!! 😉😄 Very portable I see! Lol!
@StuffUCanMake
@StuffUCanMake 5 лет назад
Great build man!
@NATHANBUILDS
@NATHANBUILDS 5 лет назад
Thanks!
@marksimon7062
@marksimon7062 5 лет назад
You should look at using a foam insulation sheet to support your work while cutting with a circular saw
@NATHANBUILDS
@NATHANBUILDS 5 лет назад
Yes great suggestion. I have actually been planning to do this, just have not gotten around to it.
@TranTheClever
@TranTheClever 4 года назад
Looks like the wood could split in that 2 x 2 on the ceiling and the whole shelf could fall. 2:38
@NATHANBUILDS
@NATHANBUILDS 4 года назад
I can confirm it has been fine for a year now with heavy use.
@KOTEC525
@KOTEC525 4 года назад
Nice job man!
@NATHANBUILDS
@NATHANBUILDS 4 года назад
Thanks!
@india45400
@india45400 2 года назад
Very good sir
@NATHANBUILDS
@NATHANBUILDS 2 года назад
Thanks!!
@rickil2363
@rickil2363 4 года назад
Why no dado slots for the middle shelf using your router?
@NATHANBUILDS
@NATHANBUILDS 4 года назад
Just wanted a different look - that would have been sturdier for sure though.
@julietphillips1991
@julietphillips1991 5 лет назад
It came out great! I have a question about what I believe you used at the beginning...the Porter Cable 20v cordless circular saw. How would you say it performs? I have been thinking of purchasing one on Amazon since I already have the battery, but the reviews are kind of crappy. What do you think of this tool?
@NATHANBUILDS
@NATHANBUILDS 5 лет назад
Thanks Juliet! I got the Porter Cable drill, driver, circular saw, jigsaw back for under $200 awhile back and I love them. Super durable, lightweight and plenty of power.
@NATHANBUILDS
@NATHANBUILDS 5 лет назад
I will say though specifically for the circular saw it is I think a 4.5" blade so don't expect equivalent performance as a larger blade. I know DeWalt makes a great normal sized battery powered circular saw. Porter Cable might as well, but I have not looked. Bottom line, for the money I don't regret any of my PC purchases.
@randysep8818
@randysep8818 3 года назад
What size is the wood is it a inch thick ?
@NATHANBUILDS
@NATHANBUILDS 3 года назад
Yes!
@josecorona5018
@josecorona5018 4 года назад
What is the size you made it?
@NATHANBUILDS
@NATHANBUILDS 4 года назад
You can find the SketchUp file in the description. That will have all the dimensions. If I recall, it's about 11" deep, ~18" wide, ~30" tall. Although it has been awhile!
@josecorona5018
@josecorona5018 4 года назад
What a about the stain use?
@NATHANBUILDS
@NATHANBUILDS 4 года назад
Walnut
@Racefiend47
@Racefiend47 3 года назад
Is there another way to download the plans? I can’t open the file. Tried both my phone and laptop
@NATHANBUILDS
@NATHANBUILDS 3 года назад
If you're downloading the SketchUp file you need the free SketchUp software. You can get it from their website - get the 2017 version which is free.
@NATHANBUILDS
@NATHANBUILDS 3 года назад
bit.ly/SketchUpSoftware
@almas6319
@almas6319 5 лет назад
Hey Nathan please make a tutorial on how to make a dressing table and how to make sofas for drawing room
@NATHANBUILDS
@NATHANBUILDS 5 лет назад
Thanks for feedback Almas! I'll see what I can do.
@josezuniga9576
@josezuniga9576 4 года назад
Could NOT get the plans for the dimensions..
@NATHANBUILDS
@NATHANBUILDS 4 года назад
You will need SketchUp to open the file. If you still can't access it, PM me at nathan.builds.inquiry@gmail.com and I'll send it to you.
@josezuniga9576
@josezuniga9576 4 года назад
@@NATHANBUILDS i could open the file because i didn't have the app. I'm NOT going to go thru that. I will try and contact you later.
@NATHANBUILDS
@NATHANBUILDS 4 года назад
Yeah unfortunately that is the only dimensions I have for this project. If you change your mind you can download the free version from their website.
Далее
Build a bookcase - Strong and Easy (how to)
14:45
Просмотров 172 тыс.
Cute kitty gadgets 💛
00:24
Просмотров 7 млн
C’est qui le plus fort 😂
00:18
Просмотров 2,6 млн
1 of 2: Simple Pine bookshelf #111
11:06
Просмотров 75 тыс.
DIY Modern Rustic Bookshelf - NO SCREWS!
8:24
Просмотров 6 тыс.
Awesome Dovetailed Bookcase With (mostly) Hand Tools!
17:22
Easy Bookshelves with only 2 tools.
9:23
Просмотров 4,8 тыс.
3 Ways to Build Floating Shelves
18:51
Просмотров 1,9 млн
How to Build a Modern Open Bookshelf {with Drawer!}
11:26
Beginning Woodworking:  Building a Simple Bookcase
19:43
DIY Bookcase for Beginners
12:11
Просмотров 41 тыс.
Chain Ring Making
0:58
Просмотров 16 млн