DIY Laminate on Stairs: Laminate Flooring Stair Nosing Installation on Open Sided Staircase How To

Подписаться 63 тыс.

Просмотров 192 тыс.

50% 1

When you do open sided laminate stairs installation you can face the stair nosing problems. I got it in my last job side. The laminate flooring stair bullnose didn't want to stay in the way I needed and I found a simple decision to solve this problem. Just watch the video "DIY Laminate Flooring Stair Nosing Installation on Open Sided Staircase" and you learn even more about laminate stairs installation!
What is inside:
00: 11 Find out the length of your tread and where the nosing connects with it.
00:32 Put your mark.
00:44 Cut nose with 45 degrees at the angle.
00:59 Find the length of the short part.
01:20 Measure the width of your tread.
01:43 Here is a tread angle profile making.
02:14 All tread parts should fit well but there is a problem with small bullnose. How to solve it?
02:27 Cut drywall!
03.13 Now you can start the installation!
03:53 Done!
Click this link for my other Laminate Stairs Tutorials!
• How to Install Laminat...
THINGS I MENTION IN THIS VID:
- Dewalt Miter Saw - amzn.to/2i7JonF
- Adhesivegun - amzn.to/2hOEoI4
- Construction Adhesive - amzn.to/2hOFeEz
- Wood Glue - amzn.to/2i3vqH4
- Scotch Masking Tape - amzn.to/2kMnA6p
SUBSCRIBE FOR MORE VIDS! www.youtube.com...
ALSO, FIND ME HERE:
/ mryoucandoityourself
/ ovisha
------------
STUFF I USE TO MAKE VIDEOS:
Canon T5i - amzn.to/2i3ptu5
Favorite tools:
1.Woodworking:
- Dewalt Table Saw - amzn.to/2h3aOgy
- Milescraft FeatherBoard - amzn.to/2kjsvIC
- Router Table - amzn.to/2ikRmO2
- Dewalt Miter Saw Crown Stops - amzn.to/2hObQOa
- Pin Nailer 23-Gauge - amzn.to/2ibSUds
- Dewalt 18 Ga nailgun - amzn.to/2i7TTaa
- Dewalt 16 Ga nailgun - amzn.to/2h33B06
- Dewalt circular saw - amzn.to/2jkgG80
- Compressor - amzn.to/2ihgl0X
- Compressor hose - amzn.to/2kOlyyl
- Festool 36 Auto Clean Vacuum - amzn.to/2jt9jX0
- Ridgid Vacuum - amzn.to/2i7HWRZ
- Makita Jig Saw - amzn.to/2i7Oe3V
- Makita Cordless Tool Kit - amzn.to/2i2oNVF
- Laminate cutter - amzn.to/2h3A6LG
- Rubber Mallet - amzn.to/2i7mnBa
- Rockwell Versacut Saw - amzn.to/2h3zTYB
- Fein Multimaster - amzn.to/2gVcZQ0
- Undercut Saw - amzn.to/2i3poqc
- Angle Grinder - amzn.to/2jXLnMh
- Sliding T-Bevel - amzn.to/2i3qMJu
- Hot Gluegun - amzn.to/2hOEuz2
- Tongue and Groove Glue - amzn.to/2hC8bD9
- Heavy-Duty Utility Knife - amzn.to/2kIvPvY
- Duct Tape - amzn.to/2jk6WdU
Click this link for my other Hardwood Stairs Tutorials!
• How to Install Hardwoo...
Thanks for watching!
Let me know what you think by commenting and rating this video!
Don't forget to subscribe :)
Main Channel:
/ mryoucandoityourself
laminate on stairs pros and cons, how to install laminate on stairs with white risers, laminate stair nose, laminate flooring on stairs with overhang, laminate stair tread caps, how to transition laminate flooring to stairs, vinyl flooring on stairs, youtube installing laminate on stairs

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@moonchasestar 5 лет назад

I can see you are very good. I have a question is how to cover the side end of the riser. I have about 12 open end stairs at both side need to cover the side of risers. I have a contractor who didn't know this will be a problem now asking me to use carpet after the entire house is wood floor now. Please help. Mine is laminated wood.

@MrYoucandoityourself 5 лет назад

Hi, I hope this video will help you - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sAyxEAcfXaI.html This decorative corner you can find in home depot or lumber stores. Thanks for watching!

@josesolis3308 Год назад

😢

@RRbookie 7 месяцев назад

Perfect video for what I was looking for. Still don't think I can do it, but thanks, man!

@MrYoucandoityourself 7 месяцев назад

You’re welcome!

@OaktownsGreatest 8 лет назад

Thank you! I have saved sooo much money learning from youtube! contractor wanted 5-6k before materials. That was including my own labor for carpet removal and basboard trimmings!

@MrYoucandoityourself 8 лет назад

+OaktownsGreatest Thank you for watching!

@compasstrans 2 года назад

Verka Serdyuchka's song was nice)))

@MrYoucandoityourself 2 года назад

Thanks for watching!

@scarlettmiller2321 10 лет назад

How did you do the next stair that was not against the wall? How did you deal with the "exposed edge"?

@dennishoffman5146 3 года назад

The bull nose cannot be raised on a stair edge because it is a trip hazard and against the code. Always cut the stair covering short to let the bull nose settle level with the laminate so there is no raised edge.

@MrYoucandoityourself 3 года назад

Hi Dennis, this type of nosing is standard for a floating floor. You can send your questions to manufacturers and building departments to change the rules. Thanks!

@raymondchow8722 2 года назад

Please be safe. I think Vinyl, Laminate, and hardwood are all dangerous on stairs. I know carpets are dirty. I think using a easily replaceable carpet runner may be the best way to go. You only have to fall down from a slippery stairs once to realize carpet is the safest option. Since permanent carpet is too hard to replace therefore I recommend a runner option.

@MrYoucandoityourself 2 года назад

Thanks!

@devupatelgmailcom 8 лет назад

ANOTHER GOOD VIDEO.

@MrYoucandoityourself 8 лет назад

+Devu Patel Thanks a lot!

@tOnySi 5 лет назад

im in this predicament right now with my own stairs. the issue on the side nosing is that there is no wall to attach it to so the edge of it is gonna look weird.

@MrYoucandoityourself 5 лет назад

Hi its not a problem, you can finish it like open side stairs. Here it is - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OIr9gWgya4g.html

@jassingh6744 3 года назад

Hi , I am always confused how to do laminate stair nosing on round stair.. the last one which is round

@MrYoucandoityourself 3 года назад

For round stairs we order special nosing from the shop.

@JuanRodriguez-pk6yq 5 лет назад

Hi,I hope you understand my writing,,,,did you put an aluminum profile for nosing?,hope u answer, thx

@MrYoucandoityourself 5 лет назад

Hi Juan, I never did this, sorry.

@JuanRodriguez-pk6yq 5 лет назад

@@MrYoucandoityourself thanks for answering,, nice job.

@MrYoucandoityourself 5 лет назад

You are welcome!

@nicerashed4041 5 лет назад

Good

@MrYoucandoityourself 5 лет назад

Thanks!

@Ovj1980 10 лет назад

Thanks bro. I think I got a pretty good idea of what it's gonna take to complete. Ive done laminate flooring before and been pretty successful but never stairs. With your help I think I got it! I only have one concern left, and that's my stairs were built with 2 by 12 treads so when I put my bull nose it's not going to cover it up completely. I guess I will just paint what's going to be left showing after I put bull nose on. Thanks again, and were are you located at?

@MrYoucandoityourself 10 лет назад

I am in Canada, Vancouver city. You should install the first stair riser, bullnose and one full board of your laminate floor and then start floor installation FROM THE STAIRS. If you do like this you'll neve have any gaps between stairs and general floor. When you finish the floor you can return to the stairs and finish their installation. Unfortunately you went in another way... Honestly it is hard to give you any advices if I do not see your problem. Send me few pic and I tell you how to solve it.

@MrYoucandoityourself 10 лет назад

Watch my vid "Laminate Flooring on Stairs: How to Start Installation" and you'll see that I start laminate stairs installation without concrete floor covering.

@Bestbetbuying 4 года назад

How long to allow the glue to settle after installation before the stairs are used?

@MrYoucandoityourself 4 года назад

Next day.

@RELOADINGandSHOOTING 7 лет назад

I enjoyed all of your vides but, can you explain the tools you are using for the lowest denomination here... thanks!

@MrYoucandoityourself 7 лет назад

Hello, you can find all tools in description. Thanks for watching!

@troybast8366 9 лет назад

Hi there. Great video. What size of nail do you use for attaching all the material. I bought 1½" 16 gauge. Any suggestion that is better for this application?

@MrYoucandoityourself 9 лет назад

Your nails are too thick. I use 23 gauge.

@nudratbutt5393 9 лет назад

Hi the list u r using in front, is that a prefabricated list that follow with the floor or is it a separate list u Buy from any wood Shop?

@MrYoucandoityourself 9 лет назад

Nudrat Butt The name of this list is riser. Steps and risers I made from existing floor.

@AVHANDYMANPROFESIONALSERVICES 8 лет назад

Hello Friend how are you? I want to ask what kind of tiptoe use for your airgun?

@m.chavez4431 3 года назад

You don't show how your making the bull nose 45 degree angle cuts

@MrYoucandoityourself 3 года назад

Sometimes it happened.

@MrMoises27 10 лет назад

Hi there. I am installing laminate flooring and have only one stair to do but it is in a angle and cannot much one stair nose with the other. Can you help me? Thanks. Maybe I can send you a picture.

@MrYoucandoityourself 10 лет назад

Yes, you can send a picture. There is fast and easy way to show and discuss your problem on Google Helpouts. Just type Hardwood and Laminate Floor Installation and you'll see my list. It is like Skype.

@M5FOREVER 2 года назад

Hi specs on the nail gun please

@MrYoucandoityourself 2 года назад

- Pin Nailer 23-Gauge - amzn.to/2ibSUds

@hammerhog22 2 года назад

I want to know how to do the next step down and also how do you hide the side of the riser you see on the next step down as well Pleas and thank you @mryoucandoityourself

@MrYoucandoityourself 2 года назад

Here it is - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OIAOByLzoAM.html

@thefools1000 10 лет назад

Hi my question is, does the nosing has to overlap on the treads? I seen other videos on laminate stairs and some of them don't look like they are overlapping. thank you.

@MrYoucandoityourself 10 лет назад

No, the nosing hasn't to overlap on the treads. It has to attach to the treads. Watch several videos from professional floor installers and you'll see it.

@Ovj1980 10 лет назад

Do you usually start from the top of the stairs and work your way down?? And does it matter if you put the riser piece in first or the tread?? Thanks brother!

@MrYoucandoityourself 10 лет назад

1.Yes, I always start from the top and work my way down. 2.I prepare 3 parts of the stair: riser, tread and nosing and look if they fit to each other. 3. Installation (if you do not have a stair landing): a) riser b) tread c) nosing If you have more questions, please feel free.

@johnnycastellanetta7183 4 года назад

I don't fault your methods or practices, but please don't put hard surface on steps. In my experience (20+ years) in flooring, almost everyone comes to their senses and rips hard surface off their steps or adds a runner after the first time someone slides down the steps. Don't think it will happen to you? Just wait...

@MrYoucandoityourself 4 года назад

Thanks for your commenting!

@Ovj1980 10 лет назад

Send me your email if your ok with that, so I can send you a picture? I'm gonna start this project soon but now I gotta go buy a stair measuring tool and a 23 gauge nailer my 18 gauge does leave big holes! Thanks