DIY Make Your Own Modern Garden Lights from PVC Pipes 

Luar biasa.....keren bang lampu hias dari pipa nya

waah baguss lampu tamannya nih dr pipa pvc

gila bagus banget, simpel, elegan, tapi saya lebih suka kalau ditutup pakai plastik buram, jadi kalau ada hewan2 kecil aman gak masuk, hujan aman dan kabel tertutup. jadi lebih keren, btw terimakasih atas inspirasinya. semoga sukses selalu .

Luar biasa....keren, top markotop kawanku. Slmt berkreasi 👍👍👍❤

Very nice beautiful sharing masahallah zabardast 👍👍👍

ide yang kreatif,sangat bagus....

keren sangat menginspirasi sekali

Simpel tapi menarik bang.

Cakeep 👍👍

Buat sdri sekeren ini g kalah ama yg bl mahal

Muito bom, parabéns.

Bonjour c'est très bien merci.

I would definitely recommend using 12V lights, not high voltage! People could die.

The bottom part is a perfect design to hold rain water causing a short circuit.

Nice work! What is the glue you are using for your project!

👍👍❤️❤️🙏🙏🙏

An inexpensive solution to the hot knife for cutting is to purchase a hacksaw blade, a piece of wooden dowel, and a hose clamp. Cut a notch into one end of the dowel. Bend blade back and forth until it breakers at approximate length. Hammer bent end straight. Insert into notch, and fasen with hose clamp. The teeth in the blade and the hose clamp will hold it tight in the notch. Walla!

ДОЖДИК, ЛИВЕНЬ....... не, не слышал

I would rather run the wire outside on the back. Otherwise put a cover on the front to keep water out and hide the wires inside 🤦🏻‍♂️

Mantap kali kawan

It would make a great wall or fence lamp too but bulb and fitting must be on top to prevent rain water short circuiting. Well done great ideas & craftsmanship. Thank you.

What about rain.....

Quiero algo así pero para mí dormitorio,hacen un video

#very professional work, Thanks my friend, Big liked+sub #

Slalu keren

joss om... salam sukses selalu om

Please make video on sensor lights in garden