DiY MAKING A SIMPLE PLYWOOD & TUBULAR FRAME DOOR | low-cost 

nice content po.

Very nice

Mantap sangat baik ide nya bos ku

Aus ito tol ah, bery nice!!

Nice job master.

Galing Boy...

Well done.. nice diy.. shout out bro..

Ayos boss buboy galing

This is so informative, thank you for sharing.

Sir gamit ka na ng autodark welding helmet

Anu po twag sa ginamit mo pang lubog sa revit??

+ m sna yan tapos para d nka angat lagyan m ng wallputy...maganda pa..or masilya...hehhe for info

Well done, i am also making a door frame, you know what i did, i used muriatic acid to remove the zinc layer, for this purpose i cut a simple pvc tube with a cap glued on one side, 60% the size of the longest tube (2.2m) about 1.20m 5cm diameter, volume is about 2.5 L , this way i plunge the zinc plated steel tube in acid for 3 mins on each side, and clean them with water. Because paint usually dont stick on zinc it peels away over time. ive seen people on youtube do it with vinegar and it takes 24h, but is safer. I managed to reuse the acid a lot of time, i have no clue how much it could last, had to stop for the night, easily removed zinc from about 12 meters (2x6m, ) of 2cm tubes in the first batch which contained 1L of acid and 2L of water. /!\ this requires much care while handling acid, avoid sudden moves that would make the liquid splash, i used glasses because no faceshield, special rubber gloves thicker than usual house cleaning stuff. never breath near the acid or wear apropriate ffp3 mask and you can live a longer life. Hope this helps somebody.

boss ano yung tools na may bala na revit?

I can imagine what that door looked like. Panel the one side and glass panels on the opposite side 👍👍

sir ano gamít mo na size ng tubular

Pa shot out nman jan idol baka nman

anong size ng tubular at ung frame na ginamit u pki list ung mga material boss

Pwede ba sa pinto Ng Bahay Yan parang Ang bigat kase .

lods title po ng background music? salamat po

magkano po inabot lahat ng materyales?

Sir paano po pag may wood door na den gusto ko door jamb na Iwas anay ano po suggestions nyo po?

bakit kung metal sheet? d pa madaling mabulok? as long as maintained ang pintura.

anu po tawag sa machine na pang butas niyo para sa pako?

Bakit mo pa pinutol yung plywood.. nice

Idol saanl kocation mo, gawa mo ko nyan...

D ipinakita ung harap🤣🤣🤣

Dre pasilip ng bahay kobo ko

You cañnot put a good man down! Politics I very very dirty in the philippines.

Anu po twag sa ginamit mo pang lubog sa revit??