DIY Marbled Candle How To Make Marbled Candles In Two Ways Homemade Candle Making Ideas 大理石纹蜡烛 

I'm so happy you watch and enjoy my videos. Thank you!😁

Por favor que tipo de pintura usaste para el segundo método plis plis 🙏🙏🙏🙏🙏 te agradezco infinitamente

I just was surprised😂😂

Right!!! Finally haha

Thank you for your feedback😊

Good questions. I had this question when I just started to learn how to make candles. Q1: 1. use a small drill machine to drill a hole. 2. Use heat gun to heat up an iron long thin stick, the heat on the stick can melt a hole (showed in this video 3:40). Both methods take a lot of time, it is better to apply for candle wick in the candle mold then pour liquid wax. Q2: There are soft and hard candle wicks, hard candle wick is an option to pass through, If you don't have hard one, you can dip the soft candle wick into wax a few second, then take it out. After wax become solid, soft candle wick can become hard in this way. A very thin iron wire can also help, make it like needle, apply soft candle wick on the wire, when wire pass through, the wick pass through as well.

Thank you for your support. water has no influence with the wax and the wick once the candle is dry.

It takes one day to dry, maybe because of different marbling paint brand.

It is marbling paint, it also shows in the video 4:06

I used liquid candle pigment to make marbled candle in the first method.

@@ZXLDIY Thank you, this method is very interesting.

This model is only sold in China. If you are interested in it, I can make a link for you, 49.99USD including shipping and a plug converter.

No，it is not clay, it is sort of sticky pad, I showed it in my pencil candle video.

I used plaster+water to make candle holders

hello, I only found one supplier in Holland, their wax don't have brand. There is no choice for me, it is easier😊

It is marbling paint, it also shows in the video 4:06

It is marbling paint. It showed in the video at 4:06

hello, paraffin+soy wax (1:1)

@@ZXLDIY thank you

I used paraffin : soy wax = 1:1 to the make pillar candles

Thank you for watching my video, But I don't understand your question.

@@ZXLDIY What is the quality of the colors used to paint the wax from the outside?

If I understand correct you mean what kind of paint, it is marbling paint from kreul, it also shows in the video at 4:07

@@ZXLDIY Thank you for your reply👍🏻🌷

شو هما الألوان لو سمحتي احكيلي

I use jesmonite pigments for candle holders

Thank you

I didn't count exactly. it depends on the size of a pot. The first layer dye should cover the whole pot, the other dye only need 2 or 3 drops over the first layer.

It is marbling paint for candles. It also show in the video at 4:06

It shows in the video at 4:06min.

I use soy wax : paraffin = 1:1 +vybar for silicone mold

ZXLDIY I'll try it thank you so much

‏Do you mean add a little soy wax and a little paraffin wax when making ​@@ZXLDIY

you don't need to seal the paint, just let it dry.

It is safe to burn, but I am not sure if it is healthy.

Thank you. The wax pouring temperature is about 85°C. The water in the pot is just normal cold water.

I tried to marble my candles and didn’t work . I poured the colors and they got stuck in the bamboo stick so you are doing something you’re not sharing and I don’t appreciate it

@@raqueldi3028 what marble paint are you using? Cause I made many of this candles and the way she shows it is the way it’s done

I did first with cold water and when I poured the paint in it just got like a film on top and got stuck in the stick

@@raqueldi3028 yes thats why I’m asking you. What brand are you using? I use Magic Marble - their are different marble paint some you can not use for this kind of painting

You need to choose the right wax. Sometimes you have to use some strength to unmold it.

Yes, I apply the wick after I unmold bubble candle

@@ZXLDIY Genuis!

@@ZXLDIY One can do this with ALL moulded candles? Not only bubble? Probably would work, right?

@@mayalippert2046 yes，of course. But it is not recommended, it takes time. I did it because sometimes the mould cannot make a hole in the bottom

@@ZXLDIY I was hoping to not make holes at all - in the actual mold that is. To just pour and makes holes in the final product (with a small/thin drill). If it's going to be time consuming, best I don't go that route then 😢

I am not sure. I hope it is safe

Answers are all in this video. Q1:4:07, Q2: 7:37

hello, it is sealer for plaster. It is a protection against dirt absorption and moisture.

Can you tell us the name of the sealer please?

Thank you for watching my video😁

Depend on the type of candles. I made a video which introduced different type of candle wicks.

@@ZXLDIY great, was curious if there was a type of cotton wick brand for a cylindrical candle mold

It is plaster

Thank you for watching my video. Great idea! I will keep that in mind.

I think you mean the powder to make candle holders. It is plaster powder.

It is marbling paint, it also shows in the video 4:06