DIY Neon Sign | Flexible LED Light | Signage - 02 

6mm X 12mm.

Opo sir, salamat!

Naka series or parallel po ung mga wire?

Super glue na pwde dumikit sa rubber at plastic.

@@NorthMindIdeas link po Sana sa store ng bibilhan ninyo 😊

facebook.com/SophiasLedLights?mibextid=ZbWKwL

Depende po sa size at font design na ipapagawa nyo. Kung sa Raon Quiapo pagbabasehan na price nasa 1,100 per square foot po presyuhan nila dun.

Clear Acrylic plastic, Vinyl sticker, Flexible Neon lights, 2 to 3 Amperes Power Supply/Adapter, Transparent Wires, Soldering iron, Super Glue (Liquid Silicon Glue).

Vinyl sticker.

Sa Raon, Quiapo marami. Flexible Neon LED Lights / Neon Flex. Di lang Neon Flex meron dun, marami din iba't ibang klase ng LED lights depende san gagamitin.

@@NorthMindIdeas Maraming salamat idol❤

@@Robel-sy1hl Acrylic Plastic.

Transparent Wires.

Wla po, binili ko mismo sa store ng mga LED lights & electrical supply.

No, its acrylic plastic.

@@NorthMindIdeas Thanks for replying😊

Meron mga gumagawa sa Quiapo/Raon nasa Php 1,000 - Php 1,200 per square foot kung single stroke lang ang Font. Mas Tataas pa ang price depende sa Font at Design.

Flexible Neon Strip Light, pareho lng naman siguro yan kasi pwde naman sya e cut ng per meter or per inch(2.5cm) or kahit saan basta't dun sya mismo e cut sa may guhit. Makikita sya mismo dun sa Neon Strip. May guhit na black sa isang side kada 1 inch(2.5cm), yun na yung palatandaan na pwde mo sya e cut kasi andun yung maliit na Copper/Rod (Positive & Negative) na pagdudugtungan ng wires.

@@NorthMindIdeas yung nabili ko kasi boss per meter ang cut, don lang may line eh

Ah ganun ba, baka nga ibang neon strip yun. Yung nabili ko kasi kumuha lang ako ng maikli at sinubukan kong balatan ng goma ang neon flex para makita ko kung ano porma ng mga ilaw nya sa loob at san pwde mg dugtong ng wires. Di naman napoponde kahit nabalatan na basta't di lng natatamaan ng cutter yung mga ilaw. At kung maganda pagkahiwa nung goma nya pwede rin naman e dikit sa glue para mabalot ulit.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vZPYQ0tZF_E.html

Thanks for watching. It should be in every end of the neon flex to make a series wire connection at the back, but i only drill a hole in one end of each piece of neon flex because i connected every piece of it directly to the wire with the main power supply.

Great thank you so much

Parehong negative at parehong postive ang pinagsama-sama ko, di ko lang masyado na focus yung wiring sa video pero nka bukod lahat ng negative at lahat ng postive na may dalwang linyang mgkahiwalay ang pinagdudugtong ko sa isang power supply lang na 2 Ampere.

Around Php 1,000 - Php 2,000 for that design.

Thanks for informing, maybe next time I will choose nicer music background. 👍

Once na mabili mo na lahat ng materials, madali mo nlng maintindihan kung pano mo e-connect yung mga wirings kasi dalwa lng naman yung linya (positive & negative) na kailangan mo e dugtong sa lahat ng putol mo ng neon flex. Basta't kada dugtong dapat parehong positive lahat at parehong negative lahat ang ipagsama-sama bago mo e connect dun sa power supply.

@@NorthMindIdeas ah okie po gets ko na.. haha.. grabe sakit po ng ulo ko kakaisip.. more videos to come sir.. salamat po..

Northmind.

Wla po, pinupuntahan ko mismo physical store ng bawat materyales na bibilhin ko.

Pwde naman. 🙂

@@NorthMindIdeas how much po? GOSPEL LIGHT ang words

Depende po sa size at font design ng ipapagawa nyo.

Message mo nlng dito ang details. Send ko dito layout design. n.mindph@gmail.com

@@mariolatia458 Acrylic plastic, Vinyl sticker, Flexible Neon LED lights, Power Supply Adapter, Transparent Wires, Soldering iron, Super Glue.

Pinagsama-sama ko lng po lahat ng wires na parehong negative at lahat din ng wires na parehong positive connected dun sa wire ng main plug.

Transparent wire connectors.

Thank you sir! This design is the first time I tried to make a neon flex sign so it's not really that perfect. Maybe in my next works I can adjust it.

For two words design with 1 square foot of acrylic plastic, the usable size of neon flex is 2 to 3 meters. The cost depends on your country how much the price of each product.

I test it by simply connecting every piece of neon flex with soldered positive & negative wires directly to the positive & negative wires of the power supply.

I wish I could, but unfortunately your place is far from ours.

Acrylic plastic, Vinyl sticker, Flexible Neon LED lights, Power Supply Adapter, Transparent Wires, Soldering iron, Super Glue.

Super glue, you can also use any similar glue that will work on acrylic plastic and neon flex.

Mi dici il nome della super colla che usi

Palace Script MT, but modified.

8 hrs.

Cyno Super Glue.

Philippines.

Nice idea, thanks. 👍

You can buy it from glass stores/acrylic plastic suppliers.

Soldering Iron tool.

@@NorthMindIdeas thank you so much!

6mm x 12mm size po nabili ko.

@@NorthMindIdeas salamat po

Wla po, binili ko mismo sa store ng mga LED lights & electrical supply.

Ang mga nabili kong neon flex pwede naman sya e cut kahit saan basta't dun mismo sa may markings sa gilid ng neon flex. Merong visible line every 1 inch dun lang pwede mag dugtong ng wires.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vZPYQ0tZF_E.html

Transparent wire connectors for led neon strip flex, it is similar to the wires used in audio or speaker transparent cables but smaller size. Can be purchased at electronic stores.

@@NorthMindIdeas I am thinking a 22-28 gauge would work?

Yes, the one I used was gauge 26, it's good to use a thinner one so it's easier to bend.

In any glass stores in your place.

Lol 😆😆.

Transparent Wires, Gauge 22 - 26.

Thanks German Machining.! 👍

Vinyl Sticker.

For a 12 volts neon flex, the shortest cut you can apply is 25mm and there is a visible line on the side of neon flex that has copper for soldering which is your guide for cutting.

3 meters.

Philippines.

Philippines

Thanks Edmilson Souza.! 👍