Raptor can be tinted with any 2pac colour, so we're going with... Primer. Looked better in red, dents and all. 4b's should be fun, don't be afraid of colour!
I agree mate, best thing I ever did was repaint my gq patrol that’s a two tone red and gold the same colour over going raptor Was much cheaper and looks much nicer
@@dalesmith4985 hahah not wrong, I live out in the country so it’s very dirty all the time. Just repainted cause some stickers from previous owner ruined the paint so had all these faded company names all over
100% bud, I'd have dents and clear coat peal with any factory gloss colour over a straight raptor coat any day, looks shithouse to me but that's just personal preference
Your guy there just bandaided that rust on the front fender it’s going to continue to spread under that body filler. He may have done a good job cleaning up the rust on the outside of the fender but the underside of the fender is still untreated and more then likely that’s where the rust has started from. The correct procedure is to cut out the affected area and weld in a patch panel. Not to mention that since you applied raptor liner once it’s applied it’s almost impossible to blend in a repair without experiencing weather fade so it’s very important to do the body work correctly the first go around. Replacement of the fender may have been the better idea in this case.
Exactly what I said. Nothing but a waste of time and money. No way "Robbie" is real body man, If he is please tell me the shop he works at so I can stay away
You guys and MCM are really crossing over. They are calling themselves the ‘best 4x4 channel’ and your buying the cheapest, sight unseen on the internet… love it.
That guard needed to be removed so it could be repaired, the inside is going to keep rusting. Would have been really easy to cut out and repair properly.
You guys need to start making colour coded or just coloured Raptor Coating so dont have that grey primer looking finish 😎 Love these kind of vids just as much as the ones out on the tracks 😎 Nice to see the use of products that may not be aware of.
When I sit down and read a magazine I think I want the newest and best truck. Then I watch something like this and realise you can make any truck great. Especially if you do it yourself. Great job!
I understand it’s not ideal to put a fresh raptor coat out in the sun but if you don’t have access to a shed or garage is it possible to do the entire process in the driveway and still have it turn out good?
The biggest difference you can make to the comfort if a car in a hot place is dynamat on the floors and roof and window tint, noise is annoying but heat is brutal
Simply bogging isn’t a long term strategy. Plus, body filler can crack in situations like exposed edges. It’s such a small repair that I would had cut it out like the floor. Use a high quality weld through primer and a seal coat. If you’re adding more than a small skim of filler, then you haven’t repaired it properly.
It's under the flare, so doesn't matter. Didn't see the rust being treated on the inside of the guard, either, so it's going to keep creeping. It'll take another 15 years before it's a problem, though.
@@einfelder8262 I wouldn’t been keen to bet on that repair lasting 15 years. I professionally restore Ford and Mopar muscle cars, have done for more than 30 years between other careers. Doing it once right is always better.
Good stuff guys! Maybe you can check with the raptor guys but I was told that raptor texture where the doors closes of the doors is not such a tight seal with the rubber seals. I was planning to do mine with the same colour with regular automotive paint for that matter for the times I'm playing submarine. If you could please clarify this would be grand. Regardless good on ya for going the extra mile and not leaving that red! The engine bay can be done when engine swapping for a 1HZ? 😂
-so i can raptor coat my 4b in 2days? when are the boys from raptor available next? haha awesome idea to do a budget video but be realistic with who you get to help.
I clean mining equipment for a living (Triple Megas & Quad Megas especially) I wash shocked at your cutting technique with the pressure washer hahahaha.
Hey guys please I need someone to get back to me would it of been possible to use brunox as the primer over the whole truck I’m doing a project atm it’s not a car but I still need to know with my experience over time when Ive used plain rust converter on rust that is also surrounded by paint it eats the paint and stuffs everything if I was to use brunox converter and primer in one would it effect the paint AT ALL? If someone that knows can get back to me it would be very much appreciated 🤙👍
Thanks for the tips. When you sand back a spot of rust on a panel, what about getting to the inside of it? That can be really tricky to get to, is it just as important?
