This video shows how my son and I built a rear end loader for the small tractor Agria 4800.
The dimensions of the shovel are 1200x700x700mm.
We used the TIG and electrode welding process.
3mm sheet steel was chosen so that the weight is not too great.
In order to have enough stability despite the low wall thickness, the shovel was reinforced with angles and U-profiles.
The weight is about 90kg (200lbs). Weight ratio: 50kg sheet metal, 30kg profiles
The shovel is attached to the drawbar with pins and two bolts on the tractor's lifting gear.
To transport shovels, mallets or similar tools, a holder with two pieces of pipe was welded on.
To protect against corrosion, the rear loader was painted twice after sandblasting.
Video chapters:
***************
00:00 - drill reinforcement profiles
01:00 - stick welding the reinforcement profiles
01:24 - weld on the upper reinforcement profile
02:17 - Build a tool holder
03:51 - TIG welding the side fastening tubes
04:58 - Welding on the fastening pins
Many thanks for using the following music, endcard and clips!
Music:
******
I'm Happy For This Guitar - Freedom Trail Studio
Triangles - Silent Partner
Endcard:
********
youtube-25102.mp4 StreamRender
Clips:
******
schaltflache-abonnieren-112699.mp4 YRDesigns
#Tractor #AgriculturalMachinery #Shovel #RearLoader #Agria #Agria4800 #DIY #selfmade #farmequipment
19 авг 2024