www.cottonandcu... for more diys and pictures!
/ cottonandcurls for glimpses of my life.
1.Grab an oversized button up top and cut off the arms, the collar and the yoke in the back to flatten the box pleat, and seam rip the pocket off.
2.Lay a top down the center and cut around one half including the sleeve, folding it over and cutting the other side.
3.Sew the front and back shoulder and the sides together. Serge or zig zag stitch to prevent fraying.
4.Try the top on and make any adjustments, mark and cut where you want the neckline to be.
5.Cut on one sleeve into 2 rectangles at least 5 or more inches wide and 10 to 20 inches long once sewn together into a tube, the longer it is the more gathered and full it will look. Mine were about 15 inches long and 5 inches wide.
7.Sew the rectangles into a tube, then sew a basting stitch along one side.
8.gather the basting stitch to fit the sleeve opening. Repeat with the other sleeve.
9.Turn the shirt right side out and pull the sleeve end into the ruffle opening, pinning right sides together
10.Sew them together.
11.Hem the bell sleeve with a rolled hem by sewing 1/4” twice
12. sew the neckline under with the same rolled hem as the sleeve. Try to be careful here to not stretch or pull too much because it can look warped or roll forward.
13.Hem the bottom if you need.
22 авг 2024
