I've used this now to make about 30 screens, and while it works well for me, I would recommend applying some grease to the threads where the tightening handles attach. Because they are a relatively small thread, and the rod and nut are not hardened, they tend to gall and bind with the forces involved. I had to replace one of them after the galling got so bad it destroyed the threads. Greasing them makes the action much smoother, prevents damage, and will allow you to crank on them more, giving you more screen tension. Update: My process for stretching screens is now this: Setup the mesh and stretch as normal, checking tension, glue down two connecting sides and spray with accelerator. Then tension some more, then glue the remaining two sides. I find this allows me to get a higher tension on the screen. The limitation to getting a high tension is the mesh keeps tearing. I glue the sides that are already starting to show some tearing. At this point I'm averaging around 20-21 N/cm. I also recommend sanding the top sharp edges of the aluminum frame, the part the mesh bends over at the top. Doing this can help to prevent the mesh from ripping if that edge is sharp.
Amigo Richard Dios derrame muchas bendiciones en usted y su familia por tomarse su tiempo para enseñarnos muchas gracias señor Richard me puede decir como se llama la herramienta conque usted preciona en la vase del taladro la lamina para poder aser perforación ala platina le agradezco bendiciones un abrazo desde Colombia 🇨🇴 bogota
Gracias por ver. No estoy seguro de a qué te refieres. ¿Puedes decirme en qué momento del video ocurre esto? (marca de tiempo) Creo que te refieres al cortador de plasma, que uso para cortar las manijas. ¿O tal vez el disco de lijado de la amoladora neumática con la que limpio los marcos? Estoy usando el traductor de Google para esto, así que podríamos tener problemas para comunicarnos.
Excelente idea, yo primero pego dos lados con Resistol atomotriz y quedan muy bien, lijando las superficies y eliminando cualquier filo que pueda rasgar la tela. Pondré en practica la idea. Gracias Bro.