Тёмный
No video :(

DIY SERIES: Fender Flare Installation, Toyota Tundra Truck Pocket Flares 

Sophisticated Redneckery
Подписаться 3,5 тыс.
Просмотров 22 тыс.
50% 1

Sophisticated Redneckery MERCH
sr-merch.com
In this episode...
I announce the winner of our 500 subscriber Giveaway! The winner will receive a $50 visa gift card and a FishTalkMagazine Hat and coozie!
Remember, every 100 subscribers, we give something away!! Just be a sub and have commented on any video within the last 90 days!
Our DIY series continues with this episode and in this time we are showing you how easy it is to install pocket fender flares on your truck, or in this case...my truck, the might Toyota Tundra:)
Link to fender flares as purchased in this video: tinyurl.com/y6l6jmoe
Purchased a fender flare kit off of Ebay and put it to the test with installation and quality. Check out the video to see how it went.
We appreciate you all watching, liking and subscribing. Remember, it doesn't cost you a thing to subscribe and helps us grow our channell. So smash that Subscribe button.
Next givewawy coming at 600!!
#diytruckstuff #diyfenderflares #fenderflares #toyotatruckdiy
Sophisticated Redneckery MERCH
sr-merch.com
Products we use in our video, these are affiliate links and it helps if you purchase through them directly.
www.favoriterodsusa.com
We are now excited to announce we have partnered with Favorite Rods and feel free to us the discount code RONAYBOYS20 for 20% off your purchases with them. You will see us using their rods/reels in all of our videos and couldn't be happier with the performance we get.
www.rheosgear.com
Don't forget those sunglasses, (as seen in our videos) as well. Get your floating Rheos shades at RheosGear.com and use code Ronay15 for 15% off your entire order.
Favorite filet knife: Dexter 9-Inch SaniSafe Fillet Knife with Sheath amzn.to/2GZlPMk\
Piscifun Fish Lip Gripper with Digital Scale
amzn.to/2YXz32r
LIFESAVER...Portable jump pack: amzn.to/2YgJ2Tx
Life vest PFD: amzn.to/3hLIyfA
Film Equipment
GOPRO
GoPro Hero w/ extra batt amzn.to/2QLJIwI
(these batteries suck, recommend 2-3 at least, here is another option we use
Telesin (GoPro) extra batteries amzn.to/2OgIQ1n
GoPro chest mount amzn.to/2D8F9oj
Jaws flexible clamp amzn.to/2DerdJr
CAMCORDER
Canon G21 camcorder: amzn.to/2XFqhHt
Extra batteries for g21: amzn.to/2DcUp3C
keywords:
tautog
tog
blackfish
jetty fishing
ocean city
bottom sweeper
favorite rods
rheos

Опубликовано:

 

15 июн 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 115   
@syked-upadventures6019
@syked-upadventures6019 4 года назад
After seeing how easy this was I may do this to my old truck!! Thank you for sharing this!
@SophisticatedRedneckery
@SophisticatedRedneckery 4 года назад
It was def easy and a nice little upgrade.
@catchfishnotfeelings1688
@catchfishnotfeelings1688 4 года назад
DIY ROCKS!! Love the fishing and hunting vids, but always cool to see something diff. Keep em coming boys!!!
@SophisticatedRedneckery
@SophisticatedRedneckery 4 года назад
Will do!
@King-Outdoors
@King-Outdoors 4 года назад
Trucks looking good bro! I would leave the screws silver and the flares flat black as well personally.
@SophisticatedRedneckery
@SophisticatedRedneckery 4 года назад
👍🏽👍🏽thanks for the feedback, always love to hear what you guys (and gals;) think
@CHIBA280CRV
@CHIBA280CRV Год назад
Looking sweeeeeetttt ! Nice job 👍🏼👍🏼👍🏼👍🏼👍🏼
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Thx
@freddydanny1613
@freddydanny1613 3 года назад
I like flat black better. I think it looks better than glossy. It matches with the rest of the truck and stands out. In my opinion it looks awesome. I already ordered these flares from your ebay link. I will try cutting them in order to keep the stock mud flaps on my truck. Thanks for the video.
@SophisticatedRedneckery
@SophisticatedRedneckery 3 года назад
Freddy Danny thanks and agreed! Good luck with those flares!
@johnnyjerkbait9557
@johnnyjerkbait9557 4 года назад
Man, I could have used that $50 :) Like the DIY vids, hope they help someone!
@SophisticatedRedneckery
@SophisticatedRedneckery 4 года назад
Keep commenting Johnny, next one could be yours!!
@raccoonrecon4477
@raccoonrecon4477 Год назад
Thank you clarifying the Bracket Installation, I was having a Moment of Stupidity ... Lol. and like a dummy I removed the rivets on one panel but, I then Realized WHY DID I DO THAT ? My neighbor works for a Body Shop and took cared of me . Again Thank you...
@SWANIS100
@SWANIS100 4 года назад
Flat black looks amazing !!!
@SophisticatedRedneckery
@SophisticatedRedneckery 4 года назад
Thanks big man!!!
@SWANIS100
@SWANIS100 4 года назад
Sophisticated Redneckery TV big man 😱😱😱🙄. Lol 😂😂
@joseortiz336
@joseortiz336 2 года назад
Brother you are straight up to the point, i discoverer your video today and you're great!! Thank you for making my day! Oh I love you truck brother!
@SophisticatedRedneckery
@SophisticatedRedneckery 2 года назад
Hey Jose, thanks man. Appreciate the kind words!!
@freddydanny1613
@freddydanny1613 3 года назад
I finally was able to install the flares. My kit didn't come with the metal clips for the front plastic bracket, but I got them from the Advanced Auto Parts. #8 Clips and Screws. It didn't come with instalation guide, but this video helped me to do the installation. I used the Edge Trim and Black Bolts from bushwacker because the Stainless Steel ones that came with it don't match with my truck. I am happy with the result.
@SophisticatedRedneckery
@SophisticatedRedneckery 3 года назад
Freddy Danny so one little hiccup, not bad and par for the course with Chinese stuff. Glad you liked them and we could help sway ya to pull the trigger (if we did 😜)
@teamrubicon8034
@teamrubicon8034 4 года назад
Cool vid, its great to see the products, how much they cost and how to install. Sure this will be helpful to someone looking to beef up their trucks!
@SophisticatedRedneckery
@SophisticatedRedneckery 4 года назад
It’s always hard To find good info on diy stuff. So figured I would throw it out there👌🏽
@darrina1051
@darrina1051 Год назад
Looks great, I got the exact same flare set that I’m getting ready to put on my 2014 Tundra Crewmax
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Couple years years in. I’m still happy with them!! If you have an IG take a pic and tag us when yours are on!! Would love to see em.
@brandongay8807
@brandongay8807 Год назад
Cool. Just subscribed
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Thank you!
@syked-upadventures6019
@syked-upadventures6019 Год назад
Great video! Might put these on my new to me tundra!
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
They are q quick add to beef it up big man!! Flat black would look nice on that white tundy
@anthonyshreve3983
@anthonyshreve3983 Год назад
Cool, Love DIY STUFF, ESPEACIALLY ON A TUNDRA!!!
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Thanks! Appreciate the support
@hilljackoutdoors2808
@hilljackoutdoors2808 Год назад
That's pretty sharp. Now I'm probably gonna have to get some for my Tundra.
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Thx. They are pretty sweet.
@brandonmurphy1506
@brandonmurphy1506 4 года назад
I think the fender flares look beast mode
@spartanlukas
@spartanlukas Год назад
Thanks for the video! I just bought some flares on Amazon for $160, flat textured black with rivets that I will 100% paint the SS rivets black. This video was a huge help, much appreciated!
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Glad it helped. If ya post on social. Tag us. Would be appreciated. Good luck with install. I’m sure it will go great
@spartanlukas
@spartanlukas Год назад
@SophisticatedRedneckery turned out awesome but it took me 4-5 hours to install and that bracket into the fender wells was not so straight forward on how it should be attached or which one was left or right and after I stalled them, I could not screw into them. Thankfully, the flares fit tight without it being an issue with no space left open. They fit nice and tight!
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Never as simple as it seems
@bigeddielopez6102
@bigeddielopez6102 Год назад
Thanks for sharing they look great
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Thx Big Eddie
@runNgun88
@runNgun88 2 года назад
Thanks! This video helped me do the install. God damn do you really have to force these things into place to match the holes up.
@SophisticatedRedneckery
@SophisticatedRedneckery 2 года назад
What’s up Run N Gun! Glad it helped!
@bigeddielopez6102
@bigeddielopez6102 Год назад
Flat Black is awesome 11:06
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Thank you. I’ve been happy with them
@sl1ker
@sl1ker 4 года назад
Looks badass bro!! Great job Johnny Boy!!
@SophisticatedRedneckery
@SophisticatedRedneckery 4 года назад
Thank you!!
@jaywilliams415
@jaywilliams415 2 года назад
Nice ride! Definitely matte over shiny! The new OTR camper shell by ARE would also look "fly" on your truck! LOL
@SophisticatedRedneckery
@SophisticatedRedneckery 2 года назад
Thank man! So many awesome looks on these trucks
@LuisGomez-zv6yh
@LuisGomez-zv6yh 2 года назад
Looks good like it is good job
@SophisticatedRedneckery
@SophisticatedRedneckery 2 года назад
Thx Luis
@acenastyninja
@acenastyninja 3 года назад
Nice ! Black out badges with plasti dip
@JamesEast
@JamesEast 3 года назад
Looks awesome bro.....crazy faces make for a better install.
@SophisticatedRedneckery
@SophisticatedRedneckery 3 года назад
Thanks. Hahaha
@maistromusic
@maistromusic Год назад
Thank you brother
@joejr9653
@joejr9653 Год назад
Paint them to match body paint.
@jamiehalifax4954
@jamiehalifax4954 2 года назад
Do you think they would trap water and cause rust over time ?. Where I live they put brine on roads in winter. Thanks !
@SophisticatedRedneckery
@SophisticatedRedneckery 2 года назад
They have not so far. They are open on bottom edge to avoid this. Ie if you have exposed damage it might rust anyways.
@runNgun88
@runNgun88 2 года назад
So does the front brackets installed with existing holes or do new holes need to be created to out the bracket in?
@SophisticatedRedneckery
@SophisticatedRedneckery 2 года назад
Mine all fit in factory holes. They need to be nudged a bit bit fit perfectly tight when in factory holes.
@rongoodwin418
@rongoodwin418 7 месяцев назад
Looks good with the flat black, are you going to black out the emblems too?
@tommyshomaker6680
@tommyshomaker6680 10 месяцев назад
Where do i find the brackets for the front flares please help
@ritafabra1299
@ritafabra1299 2 года назад
Did you not use the trim? Or did I miss that?
@SophisticatedRedneckery
@SophisticatedRedneckery 2 года назад
Yes I slid the trim piece into the frame and lined it up. There is a slight gap that it bridges.
@williamj4538
@williamj4538 Год назад
Hey SR, do these flares come with any padding/rubber seal to protect the flare contacting the body paint? Thanks!
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
yes. It’s a rubber seal that goes along the edge of the glare.
@Ballzdeepracing
@Ballzdeepracing 5 месяцев назад
Still will rub the paint raw under that rubber seal. Need to put 3m body film under those rubber seals. I played that game and lost. Sucks.
@imxploring
@imxploring 4 года назад
Great looking flairs! Love the small included mud flap on the flairs... do you have a link on where to get these?
@SophisticatedRedneckery
@SophisticatedRedneckery 4 года назад
Thx!! Yeah that was a nice surprise. Didn’t know they had that. I will add the link to description!!
@user-yj7ph9vk2k
@user-yj7ph9vk2k Год назад
Will this help keep mud from being thrown on the truck from wider tires?
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Yes it helps a bit if your tires don’t protrude last fender flares. If they stick out. They still minimize it.
@fitfam9978
@fitfam9978 4 года назад
You make me want to get a truck even more! that tundra is awesome. is that your only truck youve had??
@SophisticatedRedneckery
@SophisticatedRedneckery 4 года назад
The tundra is a great Truck. Best I’ve had to date. And I’ve had them all but Ram. F150 close second. F250 diesel next. Then the Chevy products a ways back. Just had too many issues with all my gmc products. Worst thing about yota’s. The gas mileage sucks. But smoothest riding and hardest pulling truck!! From my experience 👍🏽
@KrazyRX8
@KrazyRX8 2 года назад
We have the 2013 Rock Warrior Edition. But have the 3 inch lift kit. 36 12.50 20 tires.
@SophisticatedRedneckery
@SophisticatedRedneckery 2 года назад
Nice. Sweet truck!!! I would want a 3” or 6” but pulling the boat puts a lot of wear and tear on lifted trucks. Lots more maintenance
@tonydijock151
@tonydijock151 2 года назад
I like the two tone
@SophisticatedRedneckery
@SophisticatedRedneckery 2 года назад
Thanks Tony, I have been happy with the two-tone. Gets lots of compliments on the truck.
@tonydijock151
@tonydijock151 2 года назад
@@SophisticatedRedneckery absolutely I like em I rhino lined mine
@MrClayton92
@MrClayton92 3 года назад
Congrats to the winner and I would keep it the stainless
@jeufuyang6261
@jeufuyang6261 5 месяцев назад
So you don’t have to remove the rivets or pegs ? The bolts screw right into those ? Thanks for the video
@SophisticatedRedneckery
@SophisticatedRedneckery 5 месяцев назад
The rivets are just for looks. You will install them with little nuts. Probably the most time consuming part of the project!!
@jeufuyang6261
@jeufuyang6261 5 месяцев назад
@@SophisticatedRedneckery ahh thanks! My Rivets are a little circle instead of a screw look hope it holds the same as the screw ones
@stevekeenan9673
@stevekeenan9673 Год назад
They have gone up in price. Got some coming for $110.
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Inflation stinks but they have held up great.
@syked-upadventures6019
@syked-upadventures6019 4 года назад
That’s cool! You did not have to drill any new holes!
@SophisticatedRedneckery
@SophisticatedRedneckery 4 года назад
Nope. Non new holes. Lined up almost perfectly. One or two took a little muscle but overall. Couldn’t be happier for less than $100
@POOLCOMMANDER
@POOLCOMMANDER 3 года назад
Do you think there’s anything you could put to prevent the edge from running lines into your paint /clear coat ?
@jpallen719
@jpallen719 3 месяца назад
Does this style work on the 2013 tundra?
@SophisticatedRedneckery
@SophisticatedRedneckery 2 месяца назад
I would think so if the body style is the same. I know tundra didn’t change their style for years
@spicythai2000
@spicythai2000 4 месяца назад
Lol, we do make the face. Lol
@joseortiz336
@joseortiz336 2 года назад
How long does take you to install the fenders?
@SophisticatedRedneckery
@SophisticatedRedneckery 2 года назад
Hey Jose; Probably an hour or less. It was plug and play man.
@ATL71608
@ATL71608 5 месяцев назад
What percent tint is that 😍😍 and can you do a mod list please
@SophisticatedRedneckery
@SophisticatedRedneckery 5 месяцев назад
I have 5% on all my trucks and cars for tint. This truck has the bull bar, fender flares, roof rack and rod tubes (rocket launchers), the cap on rear. I also have the video on the pull out drawers in the back, best add ever!! It has rock lights in the wheel wells also.
@fattytatty8281
@fattytatty8281 3 года назад
Sick truck bro. Do you have a link where you purchased the flairs.
@SophisticatedRedneckery
@SophisticatedRedneckery 3 года назад
Thx Fatty, the link is in description.
@daddyk5023
@daddyk5023 7 месяцев назад
oh. i always thought you had to drill into your fenders.
@SophisticatedRedneckery
@SophisticatedRedneckery 2 месяца назад
Nope. Easy install.
@FNGMOTO
@FNGMOTO 3 года назад
It’s the o face
@rogerbrown8694
@rogerbrown8694 3 года назад
Sheeesh
@cgwjy122
@cgwjy122 3 года назад
How have the held up?
@SophisticatedRedneckery
@SophisticatedRedneckery 3 года назад
Hey 122! They have held up great. No issues. They might hav erased a tad but theybare matte finish and hard to tell. The only issue I had was the rear flare by the gas tank got some fuel on it and it is spotted. Make sure to wipe them down immediately. Other than that, holding strong looking good.
@Stancedude1
@Stancedude1 4 года назад
So no drilling required? That makes it much easier
@SophisticatedRedneckery
@SophisticatedRedneckery 3 года назад
+Venir Lekha was super Easy
@spartanlukas
@spartanlukas Год назад
I like the bed cap. I have 1.5" spacers on my 2016 Tundra. It's silver, I'm going to add the flat black flares too.
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
I love the look! Tundra is my fav truck to date. Good luck with install and have fun with it!
@iggybanda2281
@iggybanda2281 Год назад
Fast forward to 4:21 to get to the point
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Or just watch it and enjoy. 🙄
@billbieckert3762
@billbieckert3762 4 года назад
Flat black!
@SophisticatedRedneckery
@SophisticatedRedneckery 4 года назад
Yes sir!!! Agreed
@tundradude4894
@tundradude4894 3 года назад
This guys gonna regret these on this color in a year..ask me how I know🤣🤣
@SophisticatedRedneckery
@SophisticatedRedneckery 3 года назад
Been there? Dothey fade?
@rogelioroca2784
@rogelioroca2784 Год назад
dont paint them looks good
@Mark-cj9ju
@Mark-cj9ju Год назад
where can I find these. The lnk doesnt work. All the ones im finding require drilling
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
These are the ones I got amzn.to/3N2EA3S. No drilling. You will need to install the rivets and use the existing holes in fenders.
@L6901Malice
@L6901Malice Год назад
@@SophisticatedRedneckery hey thanks man I was searching high and low, do you have an IG?
@SophisticatedRedneckery
@SophisticatedRedneckery Год назад
Theronayboys
Далее
Иран и Израиль. Вот и всё
19:43
Просмотров 1,5 млн
Installing My Tundra’s New Fender Flares
17:45
Просмотров 14 тыс.
Bushwacker Flares install and review Toyota Tundra
8:59
Cheap Truck Mods That Won't Break The Bank!!!
8:57
Просмотров 36 тыс.
installing fender flares
14:12
Просмотров 19 тыс.
Fender flares for 2007-2013 Toyota Tundra
4:02
Просмотров 12 тыс.