DIY Shop Air Filter | How To Make

Подписаться 35 тыс.

Просмотров 17 тыс.

50% 1

This week I built a DIY Shop Air Filter to improve the air quality in my garage workshop. Since I don't currently have any type of filtration system in my shop, I'm hoping this will help at least a little bit. The build was pretty easy using up a bunch of scrap plywood around the shop. If you're in need of a shop air filter, I think this is a good solution to at least get the ball rolling in the right direction of higher quality air. We want to be making and building things as long as we are able to, and this certainly will help!
📧 Join my Newsletter! - FREE Hardware Storage Cabinet Build Plans when you join! - doingwhateverw...
🛠 Want awesome TOOL DEALS delivered to your inbox daily? I've got you covered 👇dailytooldeals... (FREE gift when you subscribe!)
Project Plans for this DIY Shop Air Filter: Coming Soon!
Tools and Materials:
Purchasing items via these affiliate links supports DoingWhatever at no extra cost to you. Thank you!
Miter Saw: amzn.to/2X20OIF
Drill/Driver: amzn.to/3tDLeCA
Palm Sander: amzn.to/1rIfQBm
Brad Nailer: amzn.to/1rIsjos
Air Compressor: amzn.to/24FR3MM
Combination Square: amzn.to/1ULcIjL
Tape Measure: amzn.to/2VCMXY7
Wood Glue: amzn.to/2yWvkpC
Sawzall: amzn.to/38V5dm5
Clamps: amzn.to/3pHIFMt
Band Saw: amzn.to/2NhBERA
Dowel Jig: amzn.to/35EdnyK
Dowels: amzn.to/3nIDnyM
Blow Torch: amzn.to/30hcXex
Compass: amzn.to/3ce2LJ6
Self-Centering Drill Bits: amzn.to/3sX499N
9" Fan: www.menards.co...
3/4" Plywood: homedepot.sjv.i...
Piano Hinge: amzn.to/1WhOrTn
Remote Outlet: amzn.to/2LPqVjy
Flap Disks: amzn.to/1WKSOa4
Filter 4: homedepot.sjv.i...
Filter 7: homedepot.sjv.i...
Filter 10: homedepot.sjv.i...
Hook and Loop Latch: homedepot.sjv.i...
Sealant Tape: homedepot.sjv.i...
Chain: homedepot.sjv.i...
Screw Eyes: homedepot.sjv.io/YgDWeB
Music: www.davidcutter... / @dcuttermusic
TOOLS:
🛠For a complete list of all the tools and materials I used in this video make sure to check out the project page - doingwhatever....
Merch!
Doing Whatever Sweatshirt - amzn.to/3rF64ki
Doing Whatever T-shirt - amzn.to/3rF4dfd
Help grow your RU-vid channel - tubebuddy.com/...
A tool I'm using to help grow my channel is called Tube Buddy and it helps me identify specific keywords that will help get my videos found on RU-vid. I've found it very helpful when brainstorming video title ideas and finding tags that are specific to my video.
If you're a small channel like I am, this is definitely a tool I'd recommend trying out to help kickstart your success on RU-vid - Try it free for 30 days!
tubebuddy.com/...
🛠 The Tools I Use: doingwhatever....
📐+👕Project Plans and Doing Whatever Merch: doingwhatever....
🎥 My Camera Gear for Making RU-vid Videos: kit.co/DoingWh...
🖥 My Computer Gear for Making RU-vid Videos: kit.co/DoingWh...
📦I buy almost all of my project items and materials using Amazon Prime - you simply can't beat the 2-day delivery! If you want to give Prime a try, click this link for a FREE 30-day Amazon Prime trial. amzn.to/2T9rAfE
__________________________________________________________________________________
🖥Check out my website! - doingwhatever....
🖥Check out some of my downloadable plans - gumroad.com/do...
📱Follow me on Pinterest! - / doingwhatever
📱Follow me on Instagram! - / doingwhatev. .
📱Say Hi to me on Twitter! - / doingwhateverry

Хобби

Опубликовано:

13 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@williamforsythe5850 2 года назад

Great build! Going to build something like this myself this week and your design is the one I'm using. One tiny warning for you in the future though, never good to heat anything zinc coated without a very good respirator. It vaporizes at low temps and breathing the fumes from it can cause neurological problems with a delayed response. Being a metalsmith, I never heat any zinc indoors, ever.

@DoingWhatever 2 года назад

Awesome, good luck with the build! Someone else mentioned adding some baffles (I think) on the inside to help the fan perform better. I haven’t tried that yet but maybe it’ll help you. Also- I really appreciate the words of caution about the zinc coating! I did not know that. So thanks for the warning😃

@MDD1966 5 месяцев назад

I’m building something similar but I’m pushing the air into the filters in my small shop! Good looking setup!

@sigguy1361 2 года назад

Have to chuckle as building this today would cost a fortune with the ridiculous prices of plywood!! Great build tho, thanks!

@DoingWhatever 2 года назад

Yea you’re probably better off just buying an air cleaner now! Lol thanks for the kind comment :)

@sigguy1361 2 года назад

@@DoingWhatever actually I’m heading out to the dumpster right now - my cabinet maker neighbor throws away good sized scraps!! 👍🏼🙏

@DoingWhatever 2 года назад

@@sigguy1361 that’s a great neighbor to have! 😁

@BrandonTran 2 года назад

Yep finding the right fan is the hardest part. 1. How much CFM does the fan have under a little resistance load? 2. How long will that fan last? 3-5 years. 1 year is bad. and 3. How loud is it. Some fans are quieter than others. All of these reasons I can't find a fan yet. Nice build though!

@DoingWhatever 2 года назад

Definitely a handful of things to consider! If I come across a decent squirrel cage fan I think I’m going to try that and see how it goes. Thanks for watching!

@rsxen8990 3 года назад

The style of fan is meant to have no static pressure, open air. The fan likely has a low cfm rating (if any), so it probably can't overcome much of any resistance. The filters are larger (not thickness) than the 9" area the fan can pull, so it's adding even a larger resistance.

@DoingWhatever 3 года назад

I see. The box said it was rated at 1,200 cfm but with the filters it's definitely not near that. Someone else suggested adding baffles inside the box - I'll have to try that. Thanks for the info, I appreciate it!

@mrpjr419 2 года назад

Good build!

@DoingWhatever 2 года назад

Thank you!

@woodworksbygrampies1284 Год назад

Hola!🖐I'm at beginning stage of building out my shop in my garage. In doing so I'm picking up ideas on air filtration and dust collection by watching videos like yours. Thanks for making and sharing this video. Maybe not the absolute best option out there but I definitely learned something by watching this. Take care and have a good one, Adios! 👊

@DoingWhatever 11 месяцев назад

I appreciate it! Yea the end result wasn’t the best but I learned from it for sure. I think I’ll just buy an air filter lol

@woodworksbygrampies1284 11 месяцев назад

@@DoingWhatever thank you for sharing your experience and what you learned. 👍

@fayiz1231 3 года назад

Keep on good work 🌹😊👍

@DoingWhatever 3 года назад

Thanks 😊 Will do!

@pete8279 3 года назад

I don't think you need to triple stack the filters. Try removing one or two of the filters. The size of particles you are trying to remove from the air should determine the type of filter you use. Search the web for Merv rating.. WARNING: Nerd talk ahead; The higher the Merv number the smaller the particle size the filter will, well filter. Two 6 Merv rated filters does not give you a 12 Merv rating. Airflow is based somewhat on surface area. A 20X20 1in pleated filter has 4.7 sq feet of surface, while a 2in pleated filter has 8.1 sq feet, and 4 in has 15.4. The air resistance on a 1 in. MERV 7 and a 4 in. MERV 11 are approximately the same. Basically the more surface area you have in a single filter the better your airflow thru it. Try a single 2in filter and see what happens.

@DoingWhatever 3 года назад

Thank you for all the information! Yea, currently I'm only using two of the three filters but maybe I will modify the box to use just (1) 2" filter instead like you suggested. Thanks again! 😁

@geographyinaction7814 2 года назад

@@DoingWhatever I agree with Pete. In our old house, we had a new furnace installed, we have since moved, and our new home shares the same type of new, smaller furnace. An HVAC fella told us to use just one filter, and to use the cheaper 'Filtrate' filters, with the 300# as the new high-efficiency furnaces do not breathe well when you use multiple filters. We have found our furnace runs better, cleaner, and we have less dust. Remove a couple filters, and if you have a dust collection system...you'll be fine.

@jakemiller9028 2 года назад

@@DoingWhatever Check out some other builds where they have 5 filters and make a cube for a solution to try. The reason those work better is that any filter will increase pressure drop the more fluid you put through them (in this case the air). So if you put the filters in parallel and only put 1/5 the air through each filter the pressure drop is way lower. The pressure drop for most filters is also a curve so this "boost" is magnified. [Exponential growth, so 10% of your dP might happen in the first 20% of flowrate (CFM), but in 80%-100% of the max CFM you could see 45% of your total dP, just throwing out numbers because I cannot paste an image] Now take one filter and push all the air through it, but do that three times is where you were at; really high on the curve and then tripling that increased pressure drop, hence less flow. If you combine this parallel strategy with a finer filter rating as stated above, you will still filter the desired particulates, and increase your air flow. Note, the comment above also made a great point on comparing flow and filter rating for one filter. add more and it will be even mo-betta. the initial cost up front will be higher, but they will last longer and given even more air flow after that if you are willing to alter the box to accommodate. Otherwise the 4 inch filter will work the best as previously mentioned.

@The3DHandyman 2 года назад

Nice build! A few thoughts... A single one the the air filters that you are using may only be able to handle up to 1000CFM or so. The Menards fan in the description does not have a CFM rating but I'm thinking that it would probably exceed 1000CFM. That means that the fan's performance will like be impeded even with a single filter. If the manufacturers recommended airflow is exceeded then the filter may not preform at it's intended MERV rating either. If you want to improve the performance consider adding more filters in parallel, not just another fan.

@DoingWhatever 2 года назад

Thank you! I really appreciate the advise, I'll have to give your suggestions a try 😃

@optroncordian7863 3 года назад

Remake it to accomodate a centrigugal blower. They make more flow and more vacuum/pressure, thus pushing more air through the filters.

@DoingWhatever 3 года назад

Yea... probably a better idea. Now I just have to find one! lol

@Atheistic007 2 года назад

Try it with just one filter. Or rebuild and use a 5” thick merv 8 filter.

@DoingWhatever 2 года назад

Yea, right now I'm just running one filter and it works fine. I'm probably going to try a different fan in the future or just buy one lol. Thanks for the suggestion 😃

@siphotchala5202 3 года назад

Great video. Sorry it didn't go all the way to plan. What direction did you point the fan intake in relation to your garage doors?

@DoingWhatever 3 года назад

Thanks! yea, wish it would have worked a bit better but oh well - bigger fan lol. The face of the fan intake is perpendicular to the garage doors.

@skoli55 Год назад

All you need is square fan and tape a filter to it.

@DoingWhatever Год назад

Definitely another option!

@LV-lb7dt 3 года назад

1 word for you .... baffles

@DoingWhatever 3 года назад

Does that help the air flow? Like one from the top and one from the bottom?

@LV-lb7dt 3 года назад

@@DoingWhatever the air flow inside your box is killing this .. baffle the inside of the box

@DoingWhatever 3 года назад

Thanks, I’ll give it a try!

@Tensquaremetreworkshop 3 года назад

I find your idea baffling... Baffles impede airflow, not enhance it. The issue is likely to be poor impedance matching between fan and filter. The filter is a resistance to airflow, this fan is designed to move air at low pressure. More pressure is required to increase air through the filter (it is probably leaking out around the blades- they are not a close fit to the shroud). Using three filters in series is a BAD idea- triples resistance, and will not significantly increase dust collection anyway. Better to mount them in parallel (back, bottom, top). This would give a ninefold reduction in air resistance.