DIY SOLAR ARCH

Подписаться 4,1 тыс.

Просмотров 20 тыс.

50% 1

In this video we show you how we built our solar arch before having to flee France because of the Coronavirus. Hopefully you find it helpful.
We got all our components from a UK company called Sea Screw Limited www.seascrew.com and we got some very helpful information from the Ladies over at Salty Lass • Installing solar on ou... they use the same supplier and built a similar arch.
⛵️Don't forget to SUBSCRIBE - LIKE - COMMENT we try to reply to all comments⛵️
👨‍👩‍👦‍👦 ABOUT THE FOUR OF US:
Gav & Hannah met back in 1996 on a blind date, we both had a real zest for adventure and loved travelling and holidays. We married in 2001 and then along came Liam in 2002 and Kyle in 2007, they also love travelling and adventure.
Having drove through Europe a few times, we decided that we needed more freedom and found that road travelling wasn't quite cutting it, so we looked into sailing and the rest is covered in our videos.
You want to know even more info? 🤔
OK OK
Gav is a builder and enjoys playing football(soccer) and walking & exploring, he also sometimes nerds out and plays the xbox.
Hannah is a medical secretary at the local hospital and enjoys walking & exploring and spending time with family, she also absolutely loves to find time to read her kindle.
Liam is an apprentice shopfitter/joiner and loves anything to do with being outdoors including fishing, hunting, camping and walking.
Kyle is currently in secondary school and he also loves to play football(soccer) he also loves being outdoors and playing on his xbox.
Cheers
Gav, Hannah, Liam & Kyle x
___________________________________________________
SOCIAL MEDIA:
FACEBOOK:
This is the place to keep upto date in realtime with us, we regularly post short videos and general information our our Facebook page.
👨‍👩‍👦‍👦 / sailingvesse. .
_______________________________________________________
INSTAGRAM:
Photo's are something we really love taking and we regularly upload photos to our Instagram account.
📸 / sailing_sv_. .
_______________________________________________________
PATREON:
For the price of a coffee you could help us MASSIVELY and improve the content we make for YOU, we always invest our Patreon money back into the channel.
☕️ / svcompromise
____________________________________________________________________
THE EQUIPMENT WE USE:
📹 Sony AX-53 Camera
📷 GoPro Hero 3 (Black Edition)
🚁 DJI Mavic Drone
📱 iPhone 7 plus with DJi mobile 2
🎙 Boya BY-MM1Mic
________________________________________________________________
FOR EDITING:
🖥 Apple Mac
👨🏼‍💻 Final Cut Pro x
_________________________________________________________________
MUSIC:
🔊Epidemic Sounds
__________________________________________________________________
LINKS:
sailing vlogs youtube | best sailing vlogs on youtube | unique sailing vlogs | new sailing vlogs latest sailing vlogs | sailing adventure videos | latest sailing adventure videos | sailing lifestyle sailing cruising lifestyle | sailing family | sailing with kids | latest sailing adventures | sailing lifestyle channel | best sailing blogs youtube | sailing youtube channels | youtube sailing yachts | amazing sailing videos | ocean sailing videos | sailing journey | sailing sv compromise | sailing channels on youtube
__________________________________________________________________
HASHTAGS:
#Sail #SailingFamily #Compromise #SailingLife #Sailing
#Sea #SeaLife #SailingVideo #SailingChannel #LifeStyle #Videos #RU-vid #Blogs #Boat #Adventure #Live #Yacht #svCompromise #Water #BlueWater #Lake #River #Ocean #Beach #Boatlife

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 106

@bryangervais6076 4 года назад

Great Job, thanks for sharing your idea. I find the grub screws inadequate for the job so what I have done in the past is to drill through the fitting and tubing for a 3/16 stainless pop rivet which is much more secure as well as can be easily drilled out if disassembly is required in the future. Cheers

@OverlandSea 4 года назад

Thanks Bryan, that’s a good idea, we may end up doing the same with the rivets. Cheers

@mbchudno Год назад

in cases like that, you could rotate your boat to dock it aft in. it would be a lot easier to work on. you would not need to hang up side down while trying to drill holes in your boat :)

@OverlandSea Год назад

Yes very true

@andrewbrown2063 8 месяцев назад

For easier drilling onto the very round, shiny and hard tubing I suggest-1. After marking home position with a pen, carefully grind a very small area to make a flat surface using a grinder. 2. Use a spring loaded punch to make a starter hole. 3. Add a drop of cutting oil 4. Drill a little. 5. If one wants to tap it drill all the way through then apply more cutting oil and use a tapping bit correctly sized for the grub screw and the hole to add the thread. Cutting oil really makes a mess of the deck and is hard to get rid of so best done on the dock. With practice this method is fast and simple. I like your arch, I think I will follow your idea. Thanks

@brownnoise357 Год назад

Heck that was good value, well done ! Just a thought for another use for the arch I've seen someone else do, is hang a couple of fresh fruit and veg nets port to starboard under the Solar Panels, using the safety netting you put round the guardrails on the side decks, apparently Chandlers sell it by the yard. You're right about the problem of trying to hang a large outboard and Davits off Rear Arches, which is why I'm going for an air deck and Keel inflatable tender that can be rolled up, with a 6hp Outboard that weighs a manageable 25 kilo ish that can go into a Cockpit locker. Off to see how you've got on with it since. Best Wishes and Fair Winds. Bob. 👍🙂

@OverlandSea Год назад

Thanks Bob, all the best with your project 👍🏼

@stevenscott9750 Месяц назад

Nice job Glad I watched this thank you for the tips 👍

@gatecrasher1970 7 месяцев назад

subbed from portsmouth in UK am trying to do something similar when finally get round to doing up the interior of my snapdragon 24

@BethanyIvy 4 года назад

Thanks for this! We're planning on building our own soon, and seeing all the parts laid out was really helpful! :)

@OverlandSea 4 года назад

Thanks for watching, glad it’s been of some help for you :)

@andrewbrown2063 8 месяцев назад

One could have the angles at the top on one of the arches, at about 85 degrees, ie leaning in by using swivel fittings, male and female with a bolt through, this would give any angle you want. The front to back angle could still achieved just by angling those fittings at the top, and angling the feet fittings at the bottom. One could also add extra bracing to the push pit tubing afterwards if needed, using the open jaw fittings. Back to the grub screw counter sinks, actually the easiest way is to use a drill press if you possible and make sure to clamp the piece in a mobile vice, not holding in the hand.

@northernmonkey4499 4 года назад

Very smart job Gav, it's good to see you and the family back where you belong on the boat, stay safe in these difficult times 🇬🇧👍

@OverlandSea 4 года назад

Thanks mate, wish were still there, we had to make a mad dash back to the UK for the kids otherwise we’d be stuck in France. And you!

@geofferyrobertson6608 4 месяца назад

no welding , a winner already as that would be the biggest expense

@stevie1463 4 месяца назад

Looks really tidy mate

@jasonsweet1868 Год назад

Nice job going to do one myself want to incorporate a tender lift so will use 40mm tube thanks for the clip

@OverlandSea Год назад

Should be solid with 40mm

@SailingYachtSaltyLass 4 года назад

Looks good. You did a great job there

@user-di5xt3qm9e 7 месяцев назад

Great video I had the idea but you confirm it thanks.

@billcookson2919 4 года назад

nice job, as a bolted framework it can be de-riged /upgraded at any time..nice one.

@OverlandSea 4 года назад

Cheers Bill, we would have loved to have had a manufactured one with radius’s and dingy davits but this will have to do for now.

@kwsailer1 4 года назад

Nicely done! I hope it works well for you. It certainly looks well made and well thought out.

@OverlandSea 4 года назад

Thank you, we will do a review on it eventually when we can set sail.

@Dbonesk8 4 года назад

That is tidy, first video on your channel Iv watched. Keep it up. I just bought myself a project boat so I appreciate the guidance

@pearadisevlogs7467 4 года назад

Great video! Was just thinking of doing the same, and along comes your video! BTW... M12... great tools :) Perfect on the boat.

@OverlandSea 4 года назад

Fantastic timing, let us know if we missed any info you need for doing your arch. I’m a bit of a Milwaukee fan I’ve got a few M12 tools aboard and use the M18 stuff for my day job, that M12 drills seams to be bullet proof it’s ancient and still works fine. Thanks for watching the video and subscribing

@SVImpavidus 4 года назад

Top video Gavin & Hannah. A good solution that is adaptable and reasonably priced. Sail Safe guys. Ant, Cid and the pooch crew.

@OverlandSea 4 года назад

Thanks guys, now to get the solar panels on when we get back to the boat, it’s all wired ready. Keep your hands clean and stay safe

@martinmccullough5788 4 года назад

Great job Gavin, wish i was as handy as you Sir

@OverlandSea 4 года назад

Thanks Martin

@SailingYachtSaltyLass 4 года назад

In future tie a piece of string around the handle of your drill and have a loop in the other end that goes around your wrist. As an extra safety measure, it might just save your drill one day

@markthomas7235 4 года назад

Looks great 👍

@OverlandSea 4 года назад

Cheers Mark

@davidsansebastian7872 4 года назад

Congratulations Gav and Hannah!! Very good job!. ⛵⛵⛵⛵

@OverlandSea 4 года назад

Cheers David, much appreciated 👍🏻

@nikolaucznaum4312 Год назад

That sir, is a class job!!...

@OverlandSea Год назад

Thank you

@31tresor31 4 года назад

This is my first SV Compromise vidéo! Well done. No monotonous music just clear nice vidéo. PS you should plan to clean thé inside of your mouldy lockers ;)

@OverlandSea 4 года назад

Thank you very much. She's been left since September, so we've got heaps of mould to clean when we are eventually allowed back to the boat.

@victoriabowers4768 Год назад

Great video!

@OverlandSea Год назад

Glad you enjoyed it

@dorwink 4 года назад

I have a small 31 foot that i want to make the same. Qhat donyou then o incorporating and heavey 1 piece ar h tube that allow me to move the main sheet over head. This is critical if to put a bimini up. I can not move forward the mainsheet as it it a rolling furling boom

@stevegorse9859 4 года назад

Doing all that while moored up with no workshop....top job

@OverlandSea 4 года назад

Thanks Steve

@SVTapatya 4 года назад

Congrats on the 4K subs, you guys :-)

@OverlandSea 4 года назад

Thank you very much, hope your well

@davidclarke7728 4 года назад

Good job , very informative, for a Yorke, lol

@OverlandSea 4 года назад

Hehe sometimes sound dafter than we are lol

@gotdamjacob3216 3 года назад

Great video

@pete9501 4 года назад

The price of stainless widgets is astonishing, think ours cost more than the solar panels. Be interested to see how you fix the panel to the frame in a later video. I have a single 300w because they are astonishingly cheap at the moment. However, they have a double side frame to stop the pane bending obviously, but this gives little room to bolt them down. In the end I used 8mm u bolts and a series of long flat aluminium bars inside the frame to sandwich the panel frame. We don't plan to lift the dinghy either. Our arch is 10kg and the 300w panel another 18kgs, that's enough on the arch and the stern of a 31ft yacht.

@OverlandSea 4 года назад

Your not kidding Pete, they are so expensive, but still cheaper than having one manufactured, I think they look better when manufactured but this will do us fine. We have the fittings for the panels already and it's the same as you have by the sounds of it, they are a 28mm stainless pad eyes with plates inside the panels frame. Not sure I'd want to hang our dinghy from it, I'm not even sure how it would be to help lift the outboard on the pushpit, we'll have to see. Thanks for watching and taking the time to comment. Gav

@davidnichols213 4 года назад

well done looking good

@OverlandSea 4 года назад

Cheers David

@Lew114 Год назад

I’ve heard of people paying 5000 euros for something similar. Thanks for showing us a more reasonably priced solution. It’s been 4 years. How is your project holding up? Any problems?

@OverlandSea Год назад

Sadly we had to sell up after the pandemic.

@Lew114 Год назад

@@OverlandSea I’m very sorry to hear that.

@geetee50 4 года назад

nice post , sailing britally was going to post his arch vid but never did, that means this is my favorite diy arch post, seriously well done looks crackin'

@OverlandSea 4 года назад

We'll take that (your favourite diy arch post) thank you! Chris is busy making a 32 episode series on the River Swale hehe, only joking he's alright is Chris, I spoke to him a few times when doing our sail drive diaphragm, he gave me some good advice.

@geetee50 4 года назад

@@OverlandSeaha ha very cheeky ;-) . What month are you setting off from brest?

@OverlandSea 4 года назад

End of May beginning of June depending on this Virus of course :)

@davidwarnes5158 4 года назад

Cool , how about a cross cable , when you guys are sailing ,with that solar you be amazed how much pressure will go on there ,like another sail, it will hinder your bathing platform , but you keep it up right at sea , Evan removable , you've had enough bad luck,,

@OverlandSea 4 года назад

We have extra fittings and tubing to connecting it to the pushpit which should do the same job I hope, we ran out of time when we had to flee France. Thanks for the advice.

@davidwarnes5158 4 года назад

@@OverlandSea yes I understood, from the top as a x , will stop whip , like the rigging on a mast, the stress will be sideways and up,

@OverlandSea 4 года назад

I thought there'd be an upward force which is the main reason for the backing plates and like you say David the braces should stop sideways movement. I'm sure we will see how it is in a blow and see if it needs any further bracing or support.

@harrisonruss99 4 года назад

Nice ! Looks like a job in town 👍

@OverlandSea 4 года назад

Thank you I do love that saying, it's one I learnt as an apprentice 😁 Gav

@harrisonruss99 4 года назад

Sailing SV Compromise ye I thought you would me too ,,I think it’s a Yorkshire thing for us blokes on the tools 😄

@harrisonruss99 4 года назад

Sailing SV Compromise keep it coming btw love watching your channel 👍

@OverlandSea 4 года назад

Cheers mate 😁

@OverlandSea 4 года назад

It is a Yorkshire tradesmen thing I’m sure, that and “it’s like a job on High Street” is one my old man used to say (Retired Joiner) 😂

@James-cr5qx 3 месяца назад

Do you remember the rough orientation the materials cost? And where you got them from?

@larrypinter3321 4 года назад

Very neat, professional and good-looking job. Well done. You didn't appear to tap holes to take the grub screws. Did they cut their own? How does it work?

@OverlandSea 4 года назад

Hi thank you, those grub screws are only designed to hold the tube in place, by counter sinking the tube it stops them slipping. The thread is in the couplers/joints.

@leefromsvpatchamie8607 4 года назад

I've been thinking of doing the same on mine but want to make it a davit style one to hold my 2.3m inflatable tender. It would be alot smaller than yours as my stern is very narrow. I can get the tube from my local metal wholesalers, I was thinking of getting the fittings off ebay. Where did you get your fittings from please?

@OverlandSea 4 года назад

I think if you get your supports and bracings right you would be ok to have davits. I ordered everything from a company called SeaScrew ltd. Gav

@pepperbird6671 11 месяцев назад

I'm planning exact the same thing for next year, but have to find a supplier for the components in the Netherlands. What kind of boat do you have?

@user-od1dt3sd8h 9 месяцев назад

How's it holding up years later? I'm thinking of doing this for my Westerly Centaur.

@snakeplisken4278 2 года назад

Was it stable enough side to side? Would you change anything on the design? How many watts of panels could you mount then?

@OverlandSea Год назад

It was very stable, the design worked a treat 👌🏼

@obiwanfisher537 3 года назад

What. 800 pounds? I had the very same idea and when I look at the pipes, a couple metres are like 35 quid each and the joints are like 5-20 I thought something like 200-400. Obviously it was just roughly in my head, I didnt even measure anything out yet.

@chrislouisson3749 2 года назад

Hi there, is the little brass light atop your bookshelf behind you 12 volt? If so, where on the planet did you find it? I've been searching for something like that for the yacht for several years!

@OverlandSea Год назад

Hi Unfortunately it’s 230v, however it would very simple to convert to 12v to use aboard a boat.

@johnkosowski3321 8 месяцев назад

How do you like it after all this time?

@SailingYachtSaltyLass 4 года назад

A very similar design to the one above can be found at www.saltylass.co.uk/solar-arch-for-a-bavaria-36 The design of the one above however looks more stable because having the 60degree pipe offset to the pipe that is coming up from the transom does look like it has better rigidity. The design mentioned in this comment came to £456 + Vat = £547 and used dyneema as the extra brace between the top and the side. We have replaced the dyneema with two pipes and the brackets and pipe came to an extra £100. The pipe does look better, but if you need to save a £100 it can be done.

@OverlandSea 4 года назад

Did you use 1.2mm or 1.5mm wall tubing? I’d designed ours last year and got a price from sea screw after me and Matt from sailing Creo was discussing building our arches, he ended up getting one made and we ended up running out of funds 😤 I then spoke to Ant from Impavidus telling him I was going to build our arch now, he’d told us you had built yours and sent him a video, it was good seeing the way you had built yours using the components, it’s the only video we’ve seen like it and it helped us greatly so thanks for sharing it with us, we learnt a lot from it.

@SailingYachtSaltyLass 4 года назад

@@OverlandSea - our tubing was 1.2mm. We always intended to use lightweight panels. So far, the installation has survived 4 named storms....

@OverlandSea 4 года назад

No doubt 1.2mm will be strong enough for lightweight panels, we only went for 1.5mm because we hope to incorporate a hoist for the outboard.

@SailingYachtSaltyLass 4 года назад

@@OverlandSea Regardless of what Beverley says we bought the 1.5mm diameter for all the uprights, but I did buy the 1.2mm for the 3meter lengths, as these were the ones high up. I have updated the price in the initial comment as I realised that I had not included VAT. With regard to the hoist for the dinghy motor, I thing your design will be more that adequate for that. its not like you have the weight suspended from from the frame all the time

@AndyUK-Corrival 4 года назад

Looks great, good job. What size and wattage are your solar panels? Andy UK

@OverlandSea 4 года назад

Cheers Andy We only have one 160Watt panel for now, its kept the batteries good for running everything whilst sailing in not so sunny weather, so hopefully it'll be enough for us until we can afford another one.

@AndyUK-Corrival 4 года назад

Sailing SV Compromise ok thanks. I have a flexible 150w currentOh on my spray hood but it isn’t great and mainsail shades it a lot. I think I read the monocrystaline hard panels are more efficient. My stern is very narrow in comparison to yours so an arch may look a bit odd. Might go for a panel either side like dodgers. Keep safe. Andy UK

@OverlandSea 4 года назад

The one we have is a hard panelled Mono, it was only a cheapish one from Amazon. Think they work well on the dodger, plus you can angle them how you wish. Take it easy Andy

@R.E.HILL_ 4 года назад

Nice... How many tools and parts got lost in the water? ☺

@OverlandSea 4 года назад

Surprisingly none, not even a little grub screw hehe

@sailingdev Год назад

how did you attach the panels to the tubbing?

@OverlandSea Год назад

We used some stainless steel, U shaped clamps from the chandeliers

@sailingdev Год назад

@@OverlandSea just finished mine, putting everything up was very hard, instead of U clamps I went with sea-dog railmount clamps, will see if this all last, thanks for sharing!

@johncataroche7091 2 года назад

where have you gone

@OverlandSea Год назад

Hi John we are hoping to do a video soon explaining where we’ve been, unfortunately the Covid Pandemic hit us hard, in terms of financially and family.