DIY Solenoid winding machine | Arduino project

Подписаться 251 тыс.

Просмотров 512 тыс.

50% 1

$2 for PCB Prototype & Free SMT assembly : jlcpcb.com
Hello friends in this video I have built a solenoid coil winding machine, using arduino and motors with LCD and encoder.
Item used.
Arduino nano
A4988 stepper drive
12V DC motor
stepper motor
rotary encoder
toggle switch
12V battery
IR sensor.
#arduino_project
💻visit for more projects :-
👉electricdiylab.com/
👉FB page :- / innovativemr
My Gears :-
Camera :- amzn.to/2FO4W5E
Video Light :- amzn.to/2FNKzFL
Mic :- amzn.to/2HYqBZC
Soldering Kit :- amzn.to/2FgNd8Z
Screw driver set :- amzn.to/2FkhHHm
Rotary tool :- amzn.to/2FM3Lnh Disclaimer :-
This video is made for entertainment purposes. We do not make any warranties about the completeness, safety and reliability. Any action you take upon the information on this video is strictly at your own risk, and we will not be liable for any damages or losses. It is the viewer's responsibility to use judgment, care and precautions if one plans to replicate. Please use judgment, care, and precaution if you plan to replicate. This video is made for entertainment purposes only. Please use judgment, care, and precaution if you plan to replicate. WhatsApp for custom projects +91 7600079068

Наука

Опубликовано:

8 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 254

@alanh8664 3 года назад

Having built these for Germany, Airbus: A tensioner is critical, even if just some friction on the wire spool. However a tensioner consisting of the wire passing through a open cell foam pad is much better. Not only the tension is added, but also straightens and smoths out the wire, removes oscillation in the wire prior to winds added to bobbin. A piece of foam folded over, wire running through it, pressure on the foam. If the wire mover is further from the bobbin, the wire will correctly lay by itself surprisingly well, must have tensoner adjusted. I made a bobbin winder for about 200 euros, that blew away the German 40,000 euro winder

@sayasendiri3219 11 месяцев назад

Klo bli brp hrg y boos ?

@mnmaker8440 4 года назад

Whoa... even if it may not have worked perfectly this is still a cool design and could definitely be tweaked enough to function. Great job!

@DoTheDiy 4 года назад

This fancy design means nothing if you do not show the end result and quality of winding. Which i am sure the machine fails to deliver thats y u have not shown it in video.

@patprop74 4 года назад

Well Duh hahahaha we can all imagine how it ended up, the spool was not properly supported and there was no means of adding tension to the wire as it was being spooled, Try filling a fishing rod reel without someone pinching the spool as its being filled lol the Same thing will happen lol But to be fair, his little design is a good start, now it just needs some tweaking and at least there was no hot glue used for a change.

@e-pi5189 4 года назад

The encoder resolution is also awful.

@bomche115 4 года назад

@@patprop74 Good

@EsotericArctos 4 года назад

It's a good basic start. Why don't you tweak it and make a follow-up video 🙂

@EsotericArctos 4 года назад

@@e-pi5189 probably a cheap encoder. If you tweak the design you could use higher quality 🙂. It's not bad for a concept.

@pesnet7 3 года назад

The arduino reminds me of the generation of the Z80 microprocessor. Everything was allowed, everything was possible to design.

@3xAudio 4 года назад

thanks. helping me improve my own projects and come up with ideas

@avey_6607 Год назад

Loving your workshop man, it's like you've got everything I've ever wanted for my workshop 😅great job on the winding machine too 👍

@misterAD88 4 года назад

Thank you. I love arduino projects

@Reciclandoideiasoficial 2 года назад

Muito top seu projeto . parabéns

@y2ksw1 4 года назад

Looks nice. I only would have used a stepper as the winding motor as well. Slower, but precise enough to wind cob-web coils and the such, too. And for teaching, slow motion is a nice addition.

@bockmann7446 3 года назад

That gives me the idea to use an axis of my CNC milling machine for the wire guide. The rest of the winding device would be stretched onto the machine bed like a workpiece

@stevemyatt2 3 года назад

Time index 11:00: Voice over is inaudible because of the backing music - please adjust balance - this is an excellent project! Thank you for sharing with us

@UReasonIt 4 года назад

Wow. You did cut that one a bit short at the end.

@EsotericArctos 4 года назад

What are the end results like? Are the windings nicely tensioned and even? I could see this saving hours of time if the windings are nice at the end. A few little tweaks to give consistent tension on the wire and this could be a great device. Just as a note. Music was too loud when you were doing your promotional talk. Couldn't hear it properly.

@cesurcoskuner2375 4 года назад

Very good project!

@forMakers 3 года назад

I am happy to see interesting work.^^

@69narsus68 4 года назад

Great work, I love the design. I'm looking forward to your next project. Can you share your codes and diagrams?

@circuitandtech 4 года назад

great work sir...but you should make another video by improving and show us the end result I am great fan of yours ...

@gavincurtis 3 года назад

Nice. A modified version to make me a 3D printer spool winder. :)

@marcnadeau2367 3 года назад

Nice job. Does it have a speed adjustment?

@discipleofgod5948 Год назад

You didn't show us a final product the wound bobbin. Excellent miniature of the machine I use to make transformers with. I use to sit inside a winding machine and make coils as small as you just wound up to as big as 20L paint drum. And I had to manually switch it from side to side as the wire layered, then watch the counter so that I knew when to switch off the motor at right number of turns. Your circuitry is beautifully designed to do it all at once by setting it up with a turn of a dial. Nice job

@Habravalable 4 года назад

Нужно указывать начало намотки (слева или справа), направление намотки (по часовой стрелке или против), шаг сдвига направляющей и скорость вращения шпинделя. Удачи! 👍 It is necessary to indicate the start of winding (left or right), the direction of winding (clockwise or counterclockwise), the pitch of the guide and the spindle speed. Good luck!

@ksquillings1073 4 года назад

Grate work bro

@emidiomalabelli7418 3 года назад

complimenti per i tuoi progetti.Anche se ti accusano che il progetto non funziona potrei avere i listati di arduino e il progetto in generale?. Ho bisogno di costruire una bobinatrice per trasformatori e il suo progetto puo essere la base di partenza

@binishsoni 4 года назад

Amazing video Hey please share additional settings for increasing or decreasing the stepper motor speed and is it possible to run 120w 12v DC motor with this circuit. Else share details how can i run AC motor along with speed variation on both motors

@misterAD88 3 года назад

Good vidéo thanks

@electromatic2014 4 года назад

I made this same Project for my college degree, but this is way too simple. I managed to do awg36 wire with perfect results but you require the right motors, perfect sync algorithms and control techniques... We didnt even get to see The final result Nor the process, hopefully you can show us...

@flymario8046 3 года назад

That little saw made my fingers bleed just watching you cut with it. Love your project box! Well done. Now I see you have bandaid on lol. You did great! Why didn't you show us the filling out bobbin? It looks like the directional arm is going way to fast back and forth to do a good job.

@jaredevans8518 2 года назад

Can a BLDC motor be used as the winding motor? Of course it would require a different drive circuit.

@shingabiss 8 месяцев назад

Great and clever build! Did you have the wire diameter as a constant in the code; didn't see you enter it. This would be necessary for the carriage to know what distance to travel per turn. Is the two color disk read by opto sensor to count revolutions? I would think the code would have a counter that would tell it when done.

@Edmorbus 4 года назад

Can you share the gerber files and arduino Files.

@ClarkBattle 3 года назад

Oddly, this is one of the only pickup winders that include support for the the spool.

@recovered_file 3 года назад

Great job. But no more available on electric diy lab ?? Where can I find this project ? :)

@electronic7979 4 года назад

It has been an excellent study. liked it very much.

@darrenglynn597 Год назад

It is a very nice bit of kit. But it would be nice to know what parts to get to build the project. The measurements of the casing and how high the to make it. Please advise I would like to know. Many thanks.

@iranmaia91 3 года назад

Why didn't you show the final product? Even if the machine doesn't work is good to see to know what must be improved.

@chandrasukarno2070 3 года назад

agree, it was amazing work, inspiring me at all i don't care even the machine works or not, good job

@moonstar8084 3 года назад

Failute project so ending hidden...

@thangbanben5683 2 года назад

Isn't it shown in the intro?

@iranmaia91 2 года назад

@@thangbanben5683 not the machine but the wire. He doesn't show the final wired product.

@SimonPlatten 2 года назад

How does the length and number of turns work? I would think the length is determined by the number of turns?

@neharronjonsorkarnrs8803 3 года назад

good work sir👍

@gamersofficials2584 4 года назад

Nice bro.

@vinodvinu4949 4 года назад

Hii this project looks simple and great can u please share me a complete circuit connections and code.

@137bob3d 3 года назад

the excitor coil on my yamaha stator has a center tap. could you show us how to wind it. also its not exactly at the center of the winding , more like 1/6 of the way from one end.

@shubhamsutar7602 4 года назад

Great project sir please provide code and Circuit diagram

@afawurchannel8892 3 года назад

The video is very good friend👍👍👍

@franz-juergendreis2913 3 года назад

Where can I download the gerber-file for the PCB and the Arduino sketch for thise project. The Project is great stuff and I will do a Project with my grandchildren. I will build a E-Gitar and the pickups we will wind by ourself. Therefore your Project is great to do this. Thank you for answer.

@lovelypareevlogssaudiarabia 3 года назад

Nice video

@innovacioonestecnologicaswf 2 года назад

Very good I loved this project I would love to make one, it is also so kind to give me the schematic and code I would appreciate it I am from Colombia

@ChrisTuttle 3 года назад

No band aid at the beginning...that deserves a "like"!

@_Aryan98 2 года назад

Good project

@pesnet7 4 года назад

I was on your site and everything is available to your followers, do you sell these projects that you develop? If so, how to buy kits complete with drawings and parts.

@vengug7303 4 года назад

Great job 👍 where is the code ??

@djrinconxxx8074 3 года назад

hola podrías compartir los códigos para el arduino y una consulta en vez de usar un motor dc con el sensor usar otro motor pap. y gracias por subir este tipo de videos soy un entusiasta de la electrónica y programación y por eso te pido los códigos de arduino ya que es muy básico de lo que se de arduno

@karlfimm 4 года назад

I got some good ideas out of this. Thanks.

@Val-ee4hd 2 года назад

Do you sell these coil winders? If so how much. Would love to get one.

@pesnet7 4 года назад

Mr innovative, you are fantastic. I follow you to improve my IQ, lol. You are very good at what you do. In addition to giving us motivation. Brazil - São Paulo.

@stk13ful 3 года назад

opa achei perdido um cara de sp aqui !

@pesnet7 3 года назад

@@stk13ful Isso aí meu estimado. Estamos aqui na zona sul.

@FreddyNobre 3 года назад

Opa, tô na área tb. SBC, perto da zona sul de SP. Alguém montou um projeto similar a esse pra me dar um help ???

@tatoanogueira6930 3 года назад

eae estou querendo montar , achei legal esse, alguém montou esse ou um outro,abs de Piracaia SP

@kevinhoublon8630 3 года назад

Hi there, great video 😄. I'm a beginner and I have a question : Do you have the link to buy the electric saws you used to cut the wood boards? Especially the ones at 00:57, 1:07 and 2:42. Thank you in advance 😉 Cordially.

@dsantos5526 4 года назад

this project is fantastic! would you give me the arduino algorithm code?

@EasyOne 4 года назад

perfect...videos

@jbjb303 2 года назад

Does ANYONE know what these Arduino part #s are and the programing files used for this system? I also wanted to use rotary encoder software using the built in switch control. I searched High & Low for the software.

@carloshernangarcia5511 2 года назад

Como hago para comprar el kit de la bobinadora estoy en colombia le agradesco la informacion y cuanto me vale y porque medio se paga

@SFORSANDEEP 3 года назад

How the head moves left and right even the thread rod moves in same direction??

@innovacioonestecnologicaswf 2 года назад

Excellent, your projects, I would do the winder, please, would you share the code and schematic files, I would be very grateful

@rogerbrowne5514 5 месяцев назад

Dear Sir, Where did you buy your rotary encoder ?

@satic8657 3 года назад

Здорово!!!

@yousseffikry4581 4 года назад

Nice work, can you share the code?

@abelmathews3102 2 года назад

Metal rod mm?

@gabrieleponte815 Год назад

You haven't considered the diameter of the wire, which is important for the movement of the carriage (I mean in the software part of the project, and the relative movement of the stepper motor), Also I don't see a clutch on the starting spool, in order to keep the thread always under tension

@mozillatech7402 Год назад

please make a fishing line reel machine that can forward reverse and forth using a spool reel

@sistemasdeflejadomexico233 2 года назад

Great job!! , Could you share the code. Im beginner. Thanks!!

@bitsurfer0101 4 года назад

Did you make or buy the plastic brackets?

@FIXDIY 4 года назад

Good work 👍, continue

@jotbes 2 года назад

dear friend, on which url can i get the sketch?

@llablancheHermineBZH 4 года назад

tres belle machine mais pas de code arduino pour la refaire n'y de PSB pour Electronique

@matt759537 2 месяца назад

hey do you by chance have the included firmware code to make this device / wiring diagram? very interested!

@makis_chatzopoulos 4 года назад

Great tutorial friend. Can you tell me which software do you use for 3D PCB at 10:36?

@MrInnovative 4 года назад

KiCad

@vfusion 3 года назад

Excellent arduino project Can you share arduino code file of this project

@bomche115 4 года назад

*great video. thanks you.*

@lekha4767 3 года назад

Sir, where is the code for the winding machine which you made last time , please send it

@marakiwyinager581 Год назад

Your background music is unnecessary specially when you talk. Its very high your talk sound is very low, But you did a good job.

@RandallStephens397 Год назад

this is the "5 minute crafts" version of machinist youtube

@avenger6783 Год назад

EXELENTE AMIGO....PODRIAS COMPARTIR EL DIAGRAMA Y CODIGO XFA....GRACIAS ....SALUDOS DESDE TABASCO,MEXICO

@biroesustainer573 3 года назад

Keren

@JohnUsp 4 года назад

Man, next time show the machine running for at least 1 minute or 2.

@sergiosouza9247 2 года назад

Bom dia amigo por quanto fica uma dessa

@benohsten9323 2 месяца назад

I just wound a solenoid using my fingers to guide and tension the wire. It took me twenty minutes.

@user-im5sx7ve7j 2 года назад

Where can I download source code of your project?

@ferdamravenec7998 3 года назад

genial

@acharyadevendra5942 2 года назад

Sir ..complete ......project ..price ..??? Plz reply....

@gabrielrutowicz9687 2 года назад

Where I can find code for arduino to do this project?

@servicioselectronicosjosem8610 2 года назад

Saludos de Venezuela Mrinnovative te escribe José Moreno me gustaría hacer una máquina parecida a la tuya me podrías ayudar para la elaboración del código de Arduino gracias