Тёмный

DIY Subwoofer Enclosure 2021 Edition - Caliwood Specialty 

Frank's CaliWood Specialty
Подписаться 11 тыс.
Просмотров 1,3 млн
50% 1

Follow me on Instagram @CaliwoodSpecialty
This subwoofer enclosure was made from 1/2 inch MDF. It measures 48" x 7" x 10-1/2".
Subwoofer:
Skar Audio IX-8 D4 8" 300 Watt Max Power Dual 4 Ohm Car Subwoofer
www.amazon.com/gp/product/B00...
I do not own the following songs.
Suggested by UMG
Deaf Hip-Hop World Champion Dances Beethoven Symphony No. 5
Music in this video
Song - Nuvole bianche
Artist - Ludovico Einaudi
Album - Einaudi essentiel
Writers
Ludovico Einaudi
Licensed to RU-vid by
Harmonia Mundi, UMG (on behalf of Ponderosa); CMRRA, LatinAutor, ASCAP, UMPI, LatinAutorPerf, Wise Music Group, SOLAR Music Rights Management, LatinAutor - PeerMusic, and 15 Music Rights Societies
Tyga - Taste (Official Video) ft. Offset
Music in this video
Song - Taste
Artist - Tyga
Album - Legendary
Licensed to RU-vid by
EMPIRE (on behalf of Last Kings Music / EMPIRE); Kobalt Music Publishing, LatinAutor, Sony ATV Publishing, SOLAR Music Rights Management, AMRA, Reservoir Media (Publishing), LatinAutor - SonyATV, BMI - Broadcast Music Inc., Warner Chappell, CMRRA, LatinAutor - Warner Chappell, IMPEL, Abramus Digital, ASCAP, UNIAO BRASILEIRA DE EDITORAS DE MUSICA - UBEM, LatinAutorPerf, PEDL, and 14 Music Rights Societies
Music in this video
Song - Cellar Door (Audiotree Live Version)
Artist - Graveyard Club
Album - Graveyard Club on Audiotree Live
Licensed to RU-vid by
INgrooves (on behalf of Audiotree Music); ASCAP, and 4 Music Rights Societies
Music in this video
Song - La Romana Feat. El Alfa
Artist - Bad Bunny
Licensed to RU-vid by
J & N Publishing LLC, LatinAutor - UMPG, ASCAP, SOLAR Music Rights Management, LatinAutorPerf, Warner Chappell, LatinAutor - SonyATV, UMPG Publishing, LatinAutor - Warner Chappell, AMRA, UNIAO BRASILEIRA DE EDITORAS DE MUSICA - UBEM, UMPI, CMRRA, BMI - Broadcast Music Inc., Sony ATV Publishing, PEDL, LatinAutor, and 12 Music Rights Societies
Music in this video
Song - Paso la Vida Pensando
Artist - Los Ángeles Azules
Album - Viernes Cultural
Licensed to RU-vid by
The Orchard Music (on behalf of OCESA Seitrack); BMG Rights Management (US), LLC, Sony ATV Publishing, LatinAutor - SonyATV, LatinAutor, Abramus Digital, LatinAutor - PeerMusic, SOLAR Music Rights Management, União Brasileira de Compositores, UNISON RIGHTS, S.L., BMI - Broadcast Music Inc., LatinAutorPerf, UNIAO BRASILEIRA DE EDITORAS DE MUSICA - UBEM, and 12 Music Rights Societies
RAP BEAT - SIRVAME OTRA COPA - BOLERO - HIP HOP INSTRUMENTAL
Case-g Music
Music in this video
Song - Clika nostra
Artist - Cartel de Santa
Album - Viejo Marihuano
Licensed to RU-vid by
Babilonia Music SA de CV (on behalf of BABILONIA MUSIC); BMI - Broadcast Music Inc., and 2 Music Rights Societies

Хобби

Опубликовано:

 

31 дек 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 1 тыс.   
@chapsteronetime2000
@chapsteronetime2000 3 месяца назад
I built a similar box for my 89 5.0 w two competition 10’s on 1000w alpine. Took me a hole month to build to perfection and my lord the outcome was amazing!! My wife could hear me coming a mile away! The smoothest hardest hitting box I’ve ever built
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Месяц назад
Awesome. Thanks for the comment
@Pascal.Drolet
@Pascal.Drolet 2 года назад
Painting black paint with a white tee...this guy is fearless!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
🤣 Awesome comment! I got a good chuckle out of it.
@jdizzle3740
@jdizzle3740 2 года назад
This is a great example of the workmanship that goes into a great box build. We see the sped up, condensed version, not the hours long skilled craftsman version.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
This comment is right on point. You are 100% right about the amount of time, effort, and skill that goes into each project. Thank you for your comment!
@poolnoodle5311
@poolnoodle5311 Год назад
DUDE!!!! Your bass and sound was so crystal clear.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
Yes, the thing sounds amazing.Thank you for the comment.
@adamfreeman6679
@adamfreeman6679 2 года назад
Amazing work man. Thank you for answering most of the comments and questions. People don't do that these days. I subscribed because of your interactions with followers.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you! It's greatly appreciated
@jeffreymorgan3831
@jeffreymorgan3831 2 года назад
ll
@arbiarbaei7260
@arbiarbaei7260 2 года назад
simple but great efforts and the deep bass as a great results.
@markkraus3598
@markkraus3598 2 года назад
No shortage of skills here ! You look like someone that a high end home audio company would like to have , nice work !
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Wow, that's an amazing comment! Thank you for your kinds words.
@s.o.s.exploration2412
@s.o.s.exploration2412 2 года назад
I can see how that would be beneficial. It allows 2/3 resistance/enclosure while allowing the the sound to travel and escape as well as the frequency which travels with it. Haven't had much enjoyment or success with open/bandpass boxes however designing and a reasonable amount of effort are warming me up to it. Still enjoy the hard hitting notes that come from a sealed box.
@andrewwasson6153
@andrewwasson6153 Год назад
Nice job! I was in car audio from 1984 - 2000 and specialized in custom enclosure design, xovers and custom panels. I still do my own stuff for home and car. It doesn’t get much better than the construction on that box.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
That's awesome. Thanks for the comment
@mohsenesmo2974
@mohsenesmo2974 4 месяца назад
Hello, good time, sir, I had a request. I will send you a piece of video. If it is possible, you can send me a beautiful design for the rear audio system of this car so that I can make it. I would appreciate it
@pramodyadawad4339
@pramodyadawad4339 Год назад
i love watching these builds, you nailed it sir, what an absolutely beautiful work. ❤️👌
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
Thank you for your comment
@craigbarrett2278
@craigbarrett2278 2 года назад
Always good to see innovation put to good use!😁
@jay-peephillips2349
@jay-peephillips2349 2 года назад
Wonderful bass and a Splendid build project. The bass slaps
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you!
@andyamysarizonaadventures5450
That box is a work of art,I bet it hits deep.Very nice work
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
Thank you so much! Yes, it hits very nicely.
@mauryamckendrick5446
@mauryamckendrick5446 2 года назад
T-line boxes sound awesome and the amount of sound you can get out of a single sub is crazy too!! Making it down fire like that has multiple benefits because I think they sound the best that way plus you don't need to worry about damage to the sub from a stupid passenger being careless with foot placement! When you were building it the cut out for the sub looked way bigger then a eight, but those little Skar eights do work for sure if you have a good amp going to them. I like it, I like it a lot! LoL
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Exactly! 💯 Thanks for the comment!
@marcorey2850
@marcorey2850 Год назад
Nice build!!! Well done!!!
@squareroot35
@squareroot35 2 года назад
Great job, very clean & informative. Keep up the good work.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you for the kind comment!
@mikebham4638
@mikebham4638 2 года назад
No problem gotta give credit where it’s due.
@velocast
@velocast 11 месяцев назад
Pretty nice deep mellow bass! I love it: High fidelity.
@SingleSubScrub
@SingleSubScrub 2 года назад
Absolutely beautiful work. I love seeing builds like these!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Much appreciated! Thank you
@6ixbanger
@6ixbanger 7 месяцев назад
​@@FranksCaliWoodSpecialty what is your contact info?
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 7 месяцев назад
caliwoodfrank@gmail.como@@6ixbanger
@henryfonseca2771
@henryfonseca2771 2 года назад
LINDA INICIATIVA, VIDA LONGA A SEU CANAL...PARABÉNS!!
@roycejam4758
@roycejam4758 2 года назад
Amazing brother im surprised how u haven't got more views!!! Great stuff keep it up!!!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Haha, yeah just waiting to go viral 😁 Thank you for your kind comment!
@mikebham4638
@mikebham4638 2 года назад
Hey man you think just cause I don’t post vids or anything nobody usually gives a thumb up or even reply back.
@angelvargas-sj2lh
@angelvargas-sj2lh Год назад
Great box, adding this build idea.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
Thanks! It's a fun and awesome build.
@RALPHD099
@RALPHD099 2 года назад
amazing job and thanks for the detailed explanation… i will definitely be trying a t-line for my next single cab…
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
I appreciate your comment. Glad you found it helpful. Yeah, is definitely a fun little project to make.
@cjwherley
@cjwherley 2 года назад
Dude… the for thought and deep detail. Id like to find a real at home wood worker like you near me… in my opinion it’s been a lost art with technology and what not. That’s a beautiful looking enclosure props hommie
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you for your kind words! Much appreciated.
@Wrensspeedshop
@Wrensspeedshop 2 года назад
Badass setup. Just watching the pieces being made, and you explaining the setup as you went along was appreciated. How did you calculate your inside volume, especially with those long runners? Thanks.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
First off, thanks for your comment. There are various online calculators that you can find online on how to figure out volume and port length. For this design, simply search for t-line calculator or Transmission line speaker length calculator. This should also give you the overall volume.
@Teknakill
@Teknakill Год назад
Going larger then the recommended box size for a sub is not going to wreck them, it will be louder because there is less back pressure, but your sound quality will be looser sounding, or sloppier and less tight. Bigger the box the louder (more room filling vibrations ), and the opposite for smaller boxes. Hope this helps.
@Cmoth040
@Cmoth040 2 года назад
Great video. I was looking for a coffee table sub-woofer build ideas for my home office / game-room. This might be exactly what I was looking for. Thanks for your time and for sharing.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
That sounds like a cool idea.
@richardwelsh7901
@richardwelsh7901 10 месяцев назад
I feel like somehow building it into a seat would be the way to go
@chrishorst6993
@chrishorst6993 2 года назад
I like how you build your box’s. Using screws and painting it. Seen others that don’t use any screws starts to rattle than fall apart and carpet that starts peeling off almost instantly
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thanks! Yeah, most boxes are carpet wrapped. I wanted to try something different and using paint gives it a more cleaner and sleek look. Oh yeah, for me I want to make sure that the box does not come apart so I use screws all over.
@bobthompson4319
@bobthompson4319 2 года назад
you know boxes are supposed to be turned to a frequency right? and theres a math equation to use to get what frequency you want. or theres calculators online to do the math for you. just trying to help.
@bobthompson4319
@bobthompson4319 2 года назад
next time use a longer nail and put it all the way through and square and you can just flip it over and use the router to cut it out and the cut will line up.
@bobthompson4319
@bobthompson4319 2 года назад
and it will help to put liquid nails on the screws so they won't come loose. no hating just trying to help
@bobthompson4319
@bobthompson4319 2 года назад
gluing in the connector will help keep them from cracking from the pressure. and they make a lot of different kinds of metal inserts so you don't have screws that the wood holes strip. glue them in to seal them in. just some things you might have not thought of.
@keithwaits9575
@keithwaits9575 2 года назад
I love the box design and innovation. Does the multiple turns in the slot effect anything? Is that the only way to achieve a really long port in a box?
@mtcoiner7994
@mtcoiner7994 10 дней назад
I built a large box for my home theater system. I placed within the exact same SKAR ix 8 subwoofer. Fantastic sound for the money. The key with these budget subs is to never over power them. If you give them just enough, they sound great and last a long time. A good box is also very important.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 10 дней назад
Awesome! And yes, I 100 percent agree that you need a well-designed enclosure.
@1torawi1
@1torawi1 2 года назад
Really innovative box design super impressed.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you! Much appreciated.
@drrckhamilton
@drrckhamilton 2 года назад
One of the nicest t-line boxes that I have seen. Good work.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
I really appreciate that. Thank you
@uncledope77
@uncledope77 2 года назад
This is definitely a quarter wave enclosure, but I'm curious about the frequency range. It does sound good though.
@drrckhamilton
@drrckhamilton 2 года назад
@@uncledope77 Every t-line based on quarterwave that I have ever heard has the best bandwidth of any box I have ever heard. Recently heard a Sundown SA-10 that was amazing. Dug super low with rebassed tracks but also very musical with jazz and classical. Guy was going to sell me his box and hooked it up in his vehicle because he had audiofrog and was going strictly SQ for competition. Sounded so good that he changed his mind. It sounded so good that I wasn't even upset with him. He literally quit competing because he missed that box. Not saying everyone would feel the same but ridiculous bandwidth.
@uncledope77
@uncledope77 2 года назад
I would agree with that if it was made accurately for each individual subwoofer. A lot of these homemade T-Line enclosures don't sound right. Because they don't hit that quarter wave frequency spot on the money. Sometimes not having the proper spacing in the vented walls. Without that specific frequency & spacing that will tremendously effect the overall performance and sound quality.
@drrckhamilton
@drrckhamilton 2 года назад
@@uncledope77 It's not that difficult honestly. First time I made one I killed it. Best sounding box I've ever made. Follow the steps
@Dan-gs8tz
@Dan-gs8tz 2 года назад
Did you have to raise the back seat for that box? Built two boxes already and didn't have enough clearance for an 8 inch skar, down firing. Ended up building a .40 cube sealed for infront of the seat. Next project is a vented box for the same spot, but now you got me wondering with that box you built if you didn't have to raise your back seat. Awesome build!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you! No, I did not mess with the seat. I maximized all the clearance it had under the bench.
@chilidog73
@chilidog73 2 года назад
Sounds good. Thats all the bass anyone needs. A good box makes all the difference. In high school a buddy of mine had 2 6 x9s in his truck and you would swear he was rocking 2 10" or 12" Rockfords.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
100% agree! Thanks for the comment.
@TehButterflyEffect
@TehButterflyEffect 2 года назад
I had a little Mazda truck that someone had installed Jensen 6x9's in. They made custom mounts for the doors. They got really low. Hadn't had a truck with frequency response that good until I got a Ram with Infinity audio.
@honewaatamokepumipi8135
@honewaatamokepumipi8135 2 года назад
Beautiful sound out of that, and true pure response.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Yes indeed! Thank you
@honewaatamokepumipi8135
@honewaatamokepumipi8135 2 года назад
@@FranksCaliWoodSpecialty a man who was part of my child hood made a unit for his valve 100w record player, with the exact same design and the sound was like being in Africa watching those elephants walk. Well done mate I thoroughly enjoyed that journey again
@Acoustic_Theory
@Acoustic_Theory 2 года назад
A transmission line speaker with a decoupling chamber behind the driver is called a Decoupled Antiresonant Line, or Daline. It permits more powerful quarter-wave resonance of the air in the line; it is like a hybrid between a bass-reflex system and a transmission line. In a system like this, the chamber behind the driver may have stuffing (or maybe not), but the line typically does not have any stuffing.
@juststuff5216
@juststuff5216 2 года назад
Albeit, the chamber is quite shallow, I call it a Daline, or simply a Chambered t-line. Admittedly, in my 30 years of designing t-lines, I've never tried to design one. Jesnen transflex ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6yb2msOQw_4.html or bandpass t-line ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qm5K_VVRwXQ.html is as varied as I get As for the measurements, to have a 'Line' that's 1 3/8's ... wouldn't perform that well. So this is certainly pointing more towards a daline, than a traditional 1/4 wave.
@davidcobra1735
@davidcobra1735 2 года назад
You know it's called antirezonant for a reason.
@southerntrendkiller2632
@southerntrendkiller2632 Год назад
Yes…instead of stuffing though, I add an oscillating retractable Heisenberg compensator.
@FriendofFitness
@FriendofFitness 6 месяцев назад
Is there a way to calculate something like this for dual 8" subs? How would you figure length of line and area of open chamber for each?
@szafado
@szafado 2 года назад
absolutely wonderful, bro can you share the blueprints in your description it would be awesome to build one of these on acrylic materials so that i can add some l.e.d. lights and glow up up the whole unit, the design takes full advantage of the sound waves distribution and resonance of the bass, keep up the good job 💪
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you! I made a hand drawn image with measurements that you can see at the beginning of the video. Perhaps you can pause and take a screen shot of it.
@victorveal6261
@victorveal6261 Год назад
4 ur 5
@svem1972
@svem1972 Год назад
this really awesome and amazing outcome.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
Thank You for your comment.
@nguyenquangnguyen566
@nguyenquangnguyen566 8 месяцев назад
Absolutely beautiful sound
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 8 месяцев назад
Thank you for the comment!
@jismo7
@jismo7 2 года назад
Amazing job! What is the useable frequency response please if used in a living room for example? Can it go below 30Hz and could it be scaled up for a 10 or 12 to maybe go lower, say 20Hz if the 8" cannot? Thank you.
@KnowName33
@KnowName33 2 года назад
Yes it can be scaled up for a 12"
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thanks! It's around 40Hz. Yeah, it can be scaled up for a 10 or 12", but it would not be able to ne tucked away nicely under the seat.
@BigHeinen
@BigHeinen 2 года назад
I would love to have these mounted INSIDE my living room walls in a 'stealth' kinda way. Killer boxes pal!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
I appreciate your comment. Thanks
@robcoastalga8279
@robcoastalga8279 2 года назад
Leaves chat to start putting hole in wall so I am forced to build box and put it in the wall.
@steelers19727
@steelers19727 Год назад
Sounds freaking great bro, great sounds.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
Thank you! It's still bumping and still sounding great!
@customconnections2425
@customconnections2425 2 года назад
11:46 thanks for the advice, but it was bangin on my house shaker, this is excellent work! My first vid of yours and I dig the craftsmanship and diligence to detail. Ill be watchin!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
That's what's is all about! Ha ha Thank you.
@SgtPnkks
@SgtPnkks Год назад
Every time I see a video that says "use headphones" I just look at my home theater setup and think "nah, I think I got this"
@soulbrother3299
@soulbrother3299 2 года назад
How much for a box like that? Or a box for a 1995 Silverado crew cab? Maybe two shallow 12s? Or maybe 3?? Your a genius and it looks fantastic!! I'd love for you to build me a custom box!!!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thanks for the comment! Send me a message at caliwoodfrank@gmail.com
@gainerman
@gainerman 2 года назад
Would it be possible to run a t line box with a 10 under the rear seat of a extended cab full size ,? Have you ever heard the ,pro box ported single 10 for full size Pickups? I have their earlier dual 12 sealed with 2 eclipse 6 ohm subs at 3 ohms ,not alot of room in the box after subs are in .
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
You might be able to use a 10" sub in a t-line configuration, but it would all depend on the size of the speaker + magnet. It would probably be a tight fit. This is why I chose an 8" sub. No, I have not heard of pro ported box.
@uncledope77
@uncledope77 2 года назад
Just get a higher quality 8" sub or 2 (no t-line for 2) & you'll have some awesome bass.
@kornelhegyi4663
@kornelhegyi4663 2 года назад
Wow Man! That's cool work! Congratulations!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you very much!
@lunchboxjoeb
@lunchboxjoeb 2 года назад
bet that sounds clean. good work man.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you. Yes absolutely the bass sounds low, deep, and clean! 💯
@derfskittlers6125
@derfskittlers6125 2 года назад
I've done very similar box with an 8" image dynamics sub under the back seat of my old F-150. Sounded pretty damn good for an 8 and got low, but my only complaint was a very very slight delay. It sure makes small subs sound bigger than they are.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
That's cool. It is pretty amazing how well it sounds. However, I'm not sure what you mean that yours had a slight delay. Thanks for the comment.
@Bobcatspiritdude
@Bobcatspiritdude Год назад
Yeah , I've noticed that delay in home audio , powered subs !
@WilliamTythas
@WilliamTythas Год назад
if you are getting a delay check your phasing... a lot of good powered home subs will have a phase switch.. might also have the wires reversed on the one in your car setup this is especially prevalent with door speaker replacement
@TheTruthBeToId
@TheTruthBeToId 2 года назад
Love the box design. I bet I sounds deep as fuck; and love that you used variety of music to show us how it hits.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thanks! Oh yeah, the bass is deep and clean. I'm glad you enjoyed te video.
@juststuff5216
@juststuff5216 2 года назад
I think a simple t-line might have been a better choice. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-R_QUm97_kJk.html
@keydaniels
@keydaniels 2 года назад
Beautiful work.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you for you comment!
@justingonzalez702
@justingonzalez702 2 месяца назад
This was about as good of a custom box as I've ever seen anyone do as a home project. But i can only imagine how much better it would sound if it had been built for a different sub.
@JustinHarris94899
@JustinHarris94899 Год назад
I've always wanted to do a box just like this! I mean exactly like this. I think I'm going to do one just so I know how it sounds. Awesome work!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
Awesome!
@brock9484
@brock9484 2 года назад
Very nice but out of curiosity does the sub ever slap the floor do to the excursion travel beyond the lip of the box.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Great question. No, it does not. I made sure it had sufficient clearance underneath. I've played some really bass heavy music and I've had no issue with the excursion.
@happys104092243
@happys104092243 2 года назад
Assuming you went with the srp 8" ?
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
@@happys104092243 I used the IX-8 D4
@matt6951
@matt6951 Год назад
@@FranksCaliWoodSpecialty why?
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
@@matt6951 😆 Too funny. Keep an eye out. I'll be upgrading it. Yes, I'll be making a vid.
@mikebham4638
@mikebham4638 2 года назад
Great job my dude there’s a half ass way and a way to do it right you got it locked down bro. Instead of painting it why not carpet either way it’s great quality work.💯💯💯🔥🔥🔥
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thanks! Yeah, I wanted to try something different with that black finish instead of carpeting.
@mikebham4638
@mikebham4638 2 года назад
Got ya turned out great either way you would have went.
@tesla_3_performance
@tesla_3_performance 2 года назад
Going with the black paint you could use the Duratex coating...its black and gives it a finished look plus protects the wood. Also I'd have to do some sort of mesh over the sub especially with it facing/close to the floor
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
@@tesla_3_performance Yeah I did consider a duratex finish. And yes it does provide additional protection, but I wanted a smooth finish; i believe duratex has more of a rough texture finish. Adding a mesh or some sort of cover to the sub is not necessary (it might look good, but it would not add any real protection). I ensured it had enough clearance at the bottom for excursion. A few years back I built my home sub with a similar design (down firing) and there's been no issue with dust, kids toys, etc.
@uncledope77
@uncledope77 2 года назад
@@tesla_3_performance I agree with your statement but he might not have the clearance. Because the surround is thick plus the excursion. He might have to raise the enclosure a lil bit.
@Daves2024
@Daves2024 5 месяцев назад
Dang, nice shop dude! If I had that, I would be making speakers all day, every day!!!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 5 месяцев назад
Ha ha, Thanks for the comment. Speaker building is so much fun.
@RyanBassForLife
@RyanBassForLife 2 года назад
It turned out very nice.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thanks for the comment!
@jm361
@jm361 2 года назад
Awesome work, rumor is cabinet makers are always the best sub box builders ;) Love your work, I even just subbed! Would to pick your brain one day! My neighbors dad as a kid when growing up, was a cabinet maker from scratch, best/craziest wood work I've ever seen, and their cars would always slam with the smallest subs lol, the man knew his math, angles and had the right tools! Now as of today the man is in his late 60's still doing both! For some reason he loves birch wood (I assume its much more dense, MDF has crazy chemicals he says) in cars.. Not sure what he does for homes, my home had "builder upgraded cabinets" then I got a huge discount (for the house) before the market went up lol.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Much appreciated and thank you for your kind words (and for subbing). I rarely ask people to sub to the channel because if people like what you do, they'll sub without asking. 😁 MDF has been the go to material for speaker/sub box building. There's little to no material flexing when the subs are hitting hard. However, yes, there's some wicked chemicals in MDF. Plywood, also has some level of chemicals. Face masks, good dust collection, and ventilation is important when working with these materials. Stay tuned for more. I have another dual sub build. Will make another vid!
@chandlerlofton6536
@chandlerlofton6536 2 года назад
Man, I want to do an enclosure like this for my single cab Silverado. I am more concerned with getting all the frequencies than just being loud. How did you come up with the design?
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Yup, I agree with you. It would be pointless to have a loud sub if it sounds terrible. There are various articles and sites that give you the info you need to build a box for any specific sub. Simply search for t-line calculator. Of course you can find a calculator for any box design that fits your needs.
@uncledope77
@uncledope77 2 года назад
This enclosure looks like a T-Line (quarter wave enclosure) that usually requires a bigger enclosure. That have to be properly tuned or they sound awful! Sealed enclosures are usually smaller but struggle with loud spl's at lower hertz. Also require more power than vented enclosures because they are less efficient. Please explore an enclosure that has a passive radiator. It can be the best of both worlds. It does require proper tuning which can be a headache in the beginning. But once it is done right, you can have an enclosure around the size. Of a sealed enclosure while having a lot of the efficiency of a vented enclosure. I have made passive radiator enclosures that HIT HARDER than a lot of bandpass boxes. But with a full lower frequency bandwidth. In my humble opinion 🤔
@chandlerlofton6536
@chandlerlofton6536 2 года назад
I was looking at the kicker truck box that uses a passive radiator. I wonder if it would get low in that tiny enclosure.
@chandlerlofton6536
@chandlerlofton6536 2 года назад
I was looking at the kicker truck box that uses a passive radiator. I wonder if it would get low in that tiny enclosure.
@chandlerlofton6536
@chandlerlofton6536 2 года назад
@@uncledope77 I have had my eye on that little truck box kicker makes. It uses a passive radiator. I wonder if that would be the ticket.
@NBC_NCO
@NBC_NCO 2 года назад
Nice little work shop you got there. The heartbeat of America.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Yes it is. I have slowly built it up. Maybe I'll make a short shop video tour. Thanks for your comment.
@NBC_NCO
@NBC_NCO 2 года назад
@@FranksCaliWoodSpecialty Your welcome.
@TehButterflyEffect
@TehButterflyEffect 2 года назад
I'm considering using this idea to build a couple of compact boxes for a Jeep or two. Great idea.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Yeah! Give it a shot. You won't be disappointed
@TehButterflyEffect
@TehButterflyEffect 2 года назад
@@FranksCaliWoodSpecialty I had two 10's in my Jeep years ago. Instead of doing that I think I'll build a ported "infinity port" box like yours and use a smaller sub that requires less power. It should work great. Thanks for using a good mic to record the sub after you finished the box. Most people use a phone and it can't pick up the sub very well.
@user-pwfus
@user-pwfus 2 года назад
Wicked speaker box but doo doo speaker keep it up.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
😅 Ha ha, yeah I gave this brand a shot and so far I'm pleasantly surprised with the sound and performance.
@johndoe..THE_REAL_JOHN-DOE
@johndoe..THE_REAL_JOHN-DOE 2 года назад
U can make a shitty speaker sound good with a decent box. Lol
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
@@johndoe..THE_REAL_JOHN-DOE yeah, I guess so 🤷‍♂️ lol
@kargo6
@kargo6 2 года назад
All skar subs are good except the SDR 18 due to a bad designed coil DNR 15 and the entire evl line due to weak motors they aren't efficient but take abuse
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
@@kargo6 that's good to know. 👍
@mikeoxlong91111
@mikeoxlong91111 4 месяца назад
The material cost three times what the sub does LMAO
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 4 месяца назад
True story! 😆 Sounds amazing tho. Thanks for the comment.
@bassheadcom
@bassheadcom 3 месяца назад
It's all about the box
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 3 месяца назад
@@bassheadcom YES, indeed.
@valaus90
@valaus90 Месяц назад
Yeah I would use at least an 8” Alpine type R that delivers more power than that thing 🤣
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Месяц назад
@valaus90 yeah, I've boxes for those subs too. This was something different. Thanks for the comment.
@ericbelmonte7441
@ericbelmonte7441 2 месяца назад
Congratulations. Excellent workmanship. The secret to having a deep quality bass sound is in the distance between source and outlet. Hence the labyrinth. What would also greatly help is lining the interior of the box with absorbent material, I've, old blankets or foam sponge. Best regards Eric
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Месяц назад
Right on! Thanks for the comment and your input.
@johngray2511
@johngray2511 2 года назад
The flex is going to hit the floor
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
More than a year later and no issue with the sub's excursion. Thanks for your comment.
@joshua43214
@joshua43214 2 года назад
1:17 man, don't do this. Never crosscut with a rip fence, use a miter gauge or sled. You are gonna get yourself seriously injured or killed, and someone learning from you will do the same.
@JViello
@JViello 2 года назад
Good advice...but question. At what point does a cut become a cross cut? Is it the point when width (East/West) is more than the length? (North/South) So anything wider than a square shouldn't be cut with a fence?
@joshua43214
@joshua43214 2 года назад
@@JViello Ideally, you should never rip more than half the length, and consider anything close to being a square with special caution. You can go for years without getting a kick back, and then one day it happens. I once had a full sheet of 3/4" plywood kick and frisbee across the shop with enough for to move my 1500lb planer. If a good after market extended miter gauge is too much, make yourself a sled. It is one of the few tools that will actually make you a better craftsman. Not only will it cut more accurately, it is worlds safer/
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thanks for the comment
@johnclark3067
@johnclark3067 2 года назад
This is just a really long port and not a transmission line, right?
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Yeah, I guess technically it is a really long port, but it is a t-line set up. The bass response I get from this design is outstanding. Much better than a regular ported design.
@FriendofFitness
@FriendofFitness 6 месяцев назад
I still don't understand how you figured the length? There isn't a calculator anywhere that I can find to help determine this, and also how much chamber area you decided to go with. Not to mention using dual subs. Did you guess at calculations?
@fatsolutions
@fatsolutions 2 года назад
Great build, I am always a little jealous of the American trucks when it comes to sub box builds as Australian utes and vehicles just don’t have the free space. Well built box
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Hey thanks a lot! Yeah the full size trucks are spacious.
@MiniSoundSystemPh
@MiniSoundSystemPh 2 года назад
Verry Smooth Sound i love it
@trxtech3010
@trxtech3010 2 года назад
Really nice work man!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you for the comment
@dk9696
@dk9696 2 года назад
SOUNDS GREAT!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Yes indeed 😁 Thank you!
@jesusbakle2972
@jesusbakle2972 2 года назад
Sweet enclosure thank you for sharing
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Awesome! thank you. I'll be making a dual sub enclosure, stay tuned for that vid!
@jesusbakle2972
@jesusbakle2972 2 года назад
Cant wait to see the new build
@Rowdy73
@Rowdy73 2 года назад
Looks like it sounds very musical, with different genres of music, very SQ. Gotta say good work.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you! Yes, it certainly does. Very happy with end result. It hits all the low end notes nicely. Thanks for your comment.
@TheMazdamn
@TheMazdamn Год назад
Very nice build for a budget friendly sub. The IX series is VERY impressive for its cost. I wish they made an IX6 I have a pair of T Lines that I had American Bass XD65s in years ago.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
Yup! Great bang for the buck for these type of subs no question about. Still performing nicely to this day.
@jackhartsough3
@jackhartsough3 2 года назад
That would work great for my dakota club cab. Your really talented great work.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you! yeah, the low profile box works very well if you want to make good use of dead space and don't want to take take too much space in your cab.
@digitalgoonie
@digitalgoonie 2 года назад
Really awesome!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thanks for the comment!
@myoneblackfriend3151
@myoneblackfriend3151 3 месяца назад
So clean.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 3 месяца назад
Thank you for the comment.
@frederickkwek3772
@frederickkwek3772 Месяц назад
Nice deep bass.....appreciate your video
@Manx710
@Manx710 6 месяцев назад
Rounding the inside For is a very smart idea, and should also be used in import to reduce chuffing. Great show, my first and I enjoyed it so I will subscribe to see more
@Manx710
@Manx710 6 месяцев назад
I meant to say ‘board’ not’For’
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 6 месяцев назад
Thank you for the comment. Reading comments like these motivates me to keep making more content like this.
@erichill5208
@erichill5208 2 года назад
Very nice sturdy box. Should produce nice base
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you. Yes, it's s solid build that produces clean deep bass. Thanks again.
@jayinmi3706
@jayinmi3706 2 года назад
Wow! That port length, tho! lol Nice work.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
😄 Thanks!
@yudipatriot7765
@yudipatriot7765 5 месяцев назад
Thank you very much, I built as your project with a 100w speaker it's very satishfing
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 5 месяцев назад
Wow! Outstanding. I'm glad you are enjoying it.
@cledsonmissias7249
@cledsonmissias7249 3 месяца назад
Sem duvidas, Sencional !!!
@bradleypeters8015
@bradleypeters8015 2 года назад
Awesome 🙌🏼
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thanks!
@chriswade3986
@chriswade3986 6 месяцев назад
That was very impressive.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 6 месяцев назад
Thank you for your kind comment.
@chriswade3986
@chriswade3986 6 месяцев назад
Absolutely.
@sMASHsound
@sMASHsound 2 года назад
low bass extension is good. always wanted a demo of a design like this, now im convinced i want to do it.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
You will not be disappointed!
@abelgonzalez4466
@abelgonzalez4466 2 года назад
Do you sell these?
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
@@abelgonzalez4466 I can custom make it for you.
@abelgonzalez4466
@abelgonzalez4466 2 года назад
@@FranksCaliWoodSpecialty thanks for your reply. I am very interested. Question where are you located and what is the cost? I am located in Pennsylvania.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
@@abelgonzalez4466 shoot me an email caliwoodfrank@gmail.com
@juniorink.jr.4084
@juniorink.jr.4084 14 дней назад
Its amazing, good job man 👏👏👍💖
@davidgilbert6924
@davidgilbert6924 2 года назад
was the isobaric box you built for your son in law for the JL 12"3w3 if so I would love to see how u built it or build sheet with design and measurements
@gregwhitehead7967
@gregwhitehead7967 Год назад
Beautiful
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
Thank you
@cledesma135
@cledesma135 2 года назад
Great work.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thanks for the comment 👍
@shundhem_electrick
@shundhem_electrick 2 года назад
Amazing design
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you.
@shundhem_electrick
@shundhem_electrick 2 года назад
@@FranksCaliWoodSpecialty 😁😁
@laurantsmccloskey5927
@laurantsmccloskey5927 2 года назад
VERY GOOD WOOD SKILLS
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thank you
@The_Endo
@The_Endo Год назад
bro you gonna blow dem speakers with that design of box... is cool af tho
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
Haven't blown yet 😁 Still bumping/sounding nicely Thanks for the comment
@marioantoniomarinzamudio9285
@marioantoniomarinzamudio9285 2 года назад
Se aprecia muy bien el bajo y no necesitó ni subir el volumen ni poner una canción electrónica que generalmente con cualquier Woofer suena fuerte el bajo y con este sub se puede apreciar el bass tan fino y agradable primer video que vale la pena, si esa madre hace sonar así de grave una canción suave de piano imagínate otros géneros más estruendosos
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Exactamente. Gracias por tu comentario.
@marioantoniomarinzamudio9285
@marioantoniomarinzamudio9285 2 года назад
un buen trabajo es digno de reconocerse y no es común encontrar una calidad de audio como la generas gracias a ti
@asapstan
@asapstan 2 года назад
Nice job!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thanks. I got another sub box build coming soon (dual sub box).
@isaacmcdonald8414
@isaacmcdonald8414 Год назад
Love this my brother...stay bass'd out
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
I appreciate the comment. Thank you.
@udaypratap2636
@udaypratap2636 2 года назад
Really insane
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Crazy, right?!?! The sound is even crazier.
@elchorisonn
@elchorisonn 2 года назад
sounds great vato very nice!!
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Much Appreciated, thank you!
@josetorres2113
@josetorres2113 2 года назад
thank you for sharing your video and just to know it would be a lot to ask that you also share the measurements of each piece you cut? Thank you
@goodcitizen7064
@goodcitizen7064 2 года назад
This is awesome! I just got my wife a Silverado and was wondering how to hook it up!
@vwfanatic881
@vwfanatic881 2 года назад
Awesome box, quick question though thoose floor mats reach all the way back even if you dont have the under seat storage in back? Ive been looking for somre for my silverado custom.
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Yup, I picked them up from amazon
@t.j.furness
@t.j.furness Год назад
That's pretty sweet man!👍
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty Год назад
Thank you
@t.j.furness
@t.j.furness Год назад
You're welcome@@FranksCaliWoodSpecialty
@WillemCoetzer
@WillemCoetzer 4 месяца назад
Very nice built, what software did you use wrt the air space needed for the sub to get the correct volume air
@user-pb2og3lz5d
@user-pb2og3lz5d 2 года назад
Хорошее ведро получилось)
@ilai0096
@ilai0096 2 года назад
Love it 💯💯💯💯
@FranksCaliWoodSpecialty
@FranksCaliWoodSpecialty 2 года назад
Thanks a lot. Working on a new Dual sub box right now. Be on the lookout for the next video.
Далее
MDF Wood Subwoofer Bluetooth Speaker - Powerful Bass
24:55
Common Thin Subwoofer Mistakes. Bass in a small space.
9:08
ЛЕТО 2024:
00:21
Просмотров 642 тыс.
LOUDEST SINGLE SUB I HAVE EVER HEARD!
10:11
Просмотров 142 тыс.
Building a LINE ARRAY Column Speaker- by SoundBlab
28:58
How to Design Transmission Line Subwoofer Enclosure
13:51
Жизнь
0:58
Просмотров 2,9 млн
ДОМАШНИЙ КВАС
0:36
Просмотров 3,5 млн