DIY Tracked Vehicle Part 3 - Is It Really Finished?

Подписаться 121 тыс.

Просмотров 95 тыс.

50% 1

Work continues on the DIY Tracked Vehicle it is assembled but is it really finished?. Some issues are discovered on the tracked vehicle that may need to be addressed.
🌎 Visit the Making Stuff web page for more information, Plans, Merchandise and more. - www.makingstuff.info
👉Playlist with all videos in this project - • DIY Tracked Vehicle
🛠 Tools and Parts Used In This Video:
Rear Brake Assembly - amzn.to/3mDRJ5Z
Front Brake Master Cylinder and Handle - amzn.to/3EwQuvt
Thumb Throttle - amzn.to/3FAlGeF
DuroMax Engine - amzn.to/31d18tE
Torque Converter - amzn.to/31a37PB
YesWelder 250 MIG Pro (Use discount code MAKINGSTUFF for 10% off!) - yeswelder.com/?ref=makingstuff
Rubber Tracks - rubbertrack.com/rubber-tracks...
Evolution Chop Saw - amzn.to/3cnmQ1e
Mophorn 980W Mag Drill - amzn.to/34l62Dh
Annular Cutters Small Set - amzn.to/38qkXh1
👉Other Videos You Might Like
YesWelder - • YesWelder MIG 250 PRO ...
Evolution Chop Saw - • Evolution 15" Metal Cu...
Cheapest Mag Drill on Amazon - • Reviewing the Cheapest...
Visiting Tank Commander - • HOMEMADE TANK BATTLE &...
Horizontal/Verical Band Saw - • DIY Metal Cutting Hori...
DIY Welding Cart - • Making a DIY Welding Cart
DIY Fab Table - • DIY Welding Fabricatio...
🔔 Subscribe to the Making Stuff Channel - / @makingstuff
📢 Making Stuff Patreon page - / makingstuff
👉Some of the links on this page are affiliate links. This means at no cost to you, a very, very small commission will be paid to Making Stuff to help cover the cost for projects like this one.
🛒 Visit the Making Stuff Amazon Affiliate Store - www.amazon.com/shop/makingstuff
👉Thanks for watching!
(C)2021 TMI Enterprises Inc.
#makingstuff
#trackedvehicle
#rubertracks
#personaltrackedvehicle
#goodcontentgang

Хобби

Опубликовано:

29 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 150

@bobw7066 2 года назад

I am a mechanical engineer and I saw the problem from the start, you have placed the idler and drive sprocket on top of the track frame instead of underneath and I would suggest that you fit some rollers to support the upper part of the track as well. Perouse the internet and look at the various skid steers out there and you will see what I am talking about, apart from all of that you have done a great job. From Australia

@hipairbrush1053 2 года назад

Really cool build.... can't wait to see it in action.

@divya_ 2 года назад

Amazing and inspiring to see the breadth of skills. Looking forward to the next one!

@MakingStuff 2 года назад

Coming soon! Thanks for watching!

@BaxterKaleb 2 года назад

Can't wait to see it finished!

@bobjohnson9687 2 года назад

Cant wait to see it finished!

@blackhawkinternationalsecu6962 2 года назад

Awesome vid. I'm looking forward to your next video.

@MakingStuff 2 года назад

Thanks!

@jayburrough4308 2 года назад

Great video

@imdeplorable2241 2 года назад

Yes, I did like the video.👍 It's a process, a learning process.

@MakingStuff 2 года назад

Glad you enjoyed it!

@Personal_Track_Vehicle 2 года назад

Yup, did you catch it when I explained I wanted to longest footprint possible, just because of that! I went over the handlebars on my Magic Carpet, learned that real quick! Fun, though!

@austinreish94 2 года назад

Looking forward to seeing this rip

@MrGoosePit 2 года назад

Awesome! Soon enough you will be rampaging through your beautifully manicured municipal gardens!

@MakingStuff 2 года назад

And searching for Bamboo. LOL, Thanks for watching!

@cranktowncity 2 года назад

That is one kickass segway!

@MakingStuff 2 года назад

Thanks!

@DktheWelder 2 года назад

Looks very cool! I hope moving the engine back works, I think going into a wheelie would be pretty safe but the nose dive would be scary!

@MakingStuff 2 года назад

That's the plan! Thanks for watching!

@rainbows99 2 года назад

Merry Christmas Bob

@MakingStuff 2 года назад

Merry Christmas to you too!

@tonygagey День назад

Brilliant build mate, colour me yae impressed! But( always a but,eh?!) ther is a reason Tanks mount the motor at the back, exception being Israel.

@cloviscloviscarvalho4227 2 года назад

não se esqueça de min. quero muito divulgar este trabalho!

@TerryRGraham 2 года назад

The Center of gravity is key. Everything from planes to rockets needs the center of gravity balanced. Nice job building this! I may have to borrow some of this to make my own.

@MakingStuff 2 года назад

Yeah it needs to be moved to the rear of the vehicle. Thanks for watching!

@TerryRGraham 2 года назад

@@MakingStuff or the center and then a counter weight in the back to make up for the rider in the front. I'm sure you'll get to work one way or another.

@sebsshed4517 2 года назад

Getting there mate. Can’t wait to see it done. Shame you live so far away could have bought my machine over for a ride out together. Hope you had a good Christmas

@MakingStuff 2 года назад

Thanks, wish there were more guys like you around here where I live.

@sebsshed4517 2 года назад

@@MakingStuff what part of the states are you from?

@MakingStuff 2 года назад

@@sebsshed4517 Tennessee

@sebsshed4517 2 года назад

@@MakingStuff been there once before but was a very brief passing visit. Spent a lot of time in the states mostly Florida and Louisiana once. Always wanted to see more.

@mimimitchell1989 2 года назад

Looks great can't wait to come down so you can jump over the tanks with it . Nice looking machine.

@MakingStuff 2 года назад

Thanks 👍

@reecer19 2 года назад

Really cool build! I hope you don't have to change those brake rotors often!

@MakingStuff 2 года назад

Me too. Thanks for watching!

@ukulelefatman 2 года назад

Maybe a seat that hangs over the stern a bit would balance it out. An old tractor seat mounted on some leaf springs? You'd have to drop and extend the handlebars a little, but It works great in my head 😁

@MakingStuff 2 года назад

Thanks for the tip!

@zeusmarkula4580 Год назад

Very well

@MakingStuff Год назад

Thanks

@Rebar77_real 2 года назад

Looks like you're having a ton of fun building this beast. Great work!

@MakingStuff 2 года назад

Thanks!

@elkbgl Год назад

Understanding directional tread patterns on tires, the V configuration of the lugs should point forward in direction of travel. Just my observation. Probably makes no discernable difference. Love the build and presentation. You have a new Sub!

@MakingStuff Год назад

Thanks for the info! The tracks were turned the correct direction later in the project. Works great now.

@hazleborn 2 года назад

1/2" skid plate under the length and angled up at the front, that will bring the weight balance lower and add protection. Then I would add 2-300 lbs of weight in the back as plates and or some type of hitch.

@MakingStuff 2 года назад

Got it fixed. See video posted today.

@steveseifertsr.8120 2 года назад

Don't forget to put an "Extension" on the Oil Drain Hole" so that it can be easily accessed and a brass valve on the end.

@MakingStuff 2 года назад

Yeah, I'm at the break in point on the engine and need to change the oil. Figured this one out the hard way. Thanks for the tip!

@johnsamu 2 года назад

The most easy way would be the solution that was also being used in some WW2 tankhunters. That is reverse everything. put the steering mechanism on the back side, the engine will be under your chair and effectively your rear will now be your front. The center of gravity will be almost in the middle now.

@Hollywood4Fun Месяц назад

I'm just curious - what program do you use to draw your plasma cut parts. I'm in the middle of a small CNC plasma cutting table build. I played around with illustrator to create some black and white SVG files which I then brought into open builds cam to create toolpaths. It's all new to me but nevertheless an enjoyable learning curve. Thanks for the great vids. Are you running Mach 3 on your plasma controller?

@Merlogcz 9 месяцев назад

Hey Bob, really cool project you have there! Could you let us know what kind of differential + drive axle you are using?

@MakingStuff 8 месяцев назад

It came from SurplusCenter.com

@TERRYB0688 2 года назад

Hi how about extending the standing platform at the back and extending the handle bar mechanism, just a thought 👴🏻👍

@waydweaver7596 2 года назад

where did you get the differential?

@Mr.ninja69 2 месяца назад

It would have been wise in my opinion to make your break rotors interchangeable as well

@petrasv7795 2 года назад

Very nice project. Could please refer what kind of differential do you use ?

@MakingStuff 2 года назад

makingstuff.info/Projects/Personal_Tracked_Vehicle

@nimquie1000 2 года назад

Change the steering wheel around to the back ?

@prussian7 2 года назад

I thought about making something like this about 10 years ago. Just big enough to pull small logs out of the woods and help access trails.

@MakingStuff 2 года назад

It's almost finished, what changes would you make to it for better performance?

@Crewsy 2 года назад

When I first saw your post on Instagram mocking up the handlebars I thought a pivot point where the vertical bar angles back would be good. You could have a spring setup like your bogies to hold the handlebars up but still provide some movement when needed. I hope your modifications work to improve the balance.

@romellyarde907 Год назад

this is nice but where did you get the dif from and what type

@MakingStuff Год назад

makingstuff.info/Projects/Personal_Tracked_Vehicle

@chrisgoldbach4450 28 дней назад

My biggest question is how can you make a cart with tracks that you can pull? The differential part is where I get lost. I want to pull a wagon out back but I need to be able to turn it left and right instead of just straight. Your the only one smart enough

@mattesmiol7466 2 года назад

Nice project! One question, does it have reverse?

@MakingStuff 2 года назад

Nope

@marvinhillAllthrwaytolife 7 месяцев назад

Where do I get the shaft differential

@BuildItFixItDIY 2 года назад

I enjoy your presentation and videos/content. 1 minor thing that won't make a hill of beans difference that I noticed is that the track was backwards. That is strictly aesthetic because this isn't an excavator or anything that needs to push (pull in your case) a lot, but. . .when viewed from the back, the lugs should angle downward on the outside edges like a tractor tire's do.

@MakingStuff 2 года назад

Already fixed. See video I posted today. Thanks for watching!

@BuildItFixItDIY 2 года назад

@@MakingStuff They haven't changed orientation from what I can see. Glad the balance thing got remedied and congrats on finishing it!

@mlentsch 2 года назад

How about an electric version... with all the major structural assemblies made from composite?? One giant outrunner for each track?

@lloyd4768 2 года назад

I think you need some counter weight in back and extend the platform a little to the rear

@MakingStuff 2 года назад

Always an option, thanks for watching!

@roadrunner4404 2 года назад

I favor moving the engine back, and if required your handlebars and standing platform too. Moving the from idle wheels will steepening the angle of the tracks at the front. Maybe cut n reweld the entire track mount assy forward 3 inches on frame is easier. Testing will tell the tale.

@MakingStuff 2 года назад

Thanks for the tips!

@johnkoury1116 Год назад

Bob, I cannot find where you list where you found the differential. Did you get it on eBay or was is someplace special? Excellent video series and a new subscriber.

@MakingStuff Год назад

I got it from Surplus Center but it looks like they no longer carry it. I will update the web page, thanks for letting me know. You can find it here. www.staton-inc.com/store/index.php?p=product&id=179

@johnkoury1116 Год назад

@@MakingStuff Wow I did not know that Peerless made that. Thank you so much. I am going to try and replicate your incredible bogie setup for a mini dozer that I am going too try to build. Everything is soooo expensive though. Thank you so much.

@09FLTRMM77 2 года назад

MM77 Approved 👍🏼👍🏼

@MakingStuff 2 года назад

Right on!

@florentleider222 2 года назад

Inspiring. I bet the price of the pair of tracks accounts at least for 2/3 of the whole price....

@MakingStuff 2 года назад

More like 11/32. LOL, thanks for watching!

@lotuselanplus2s 2 года назад

Progress, one thing that you could do to help with the front heavy issue, the handlebar mount, what about making it straight/upright without the bend and putting it behind the engine and also a 2 square hollow section is more than heavy enough for the handlebar mount, looks like youre using 2 by 3 inch. if it weighs 30 pounds then moving it will be a 60 pound weight shift, its the easies and first thing that i'd try. Oh and one more thing, a motorcycle throttle might be a better solution than the thumb throttle, i've never liked them.

@MakingStuff 2 года назад

Thanks for the tips!

@drmarkintexas-400 2 года назад

🏆🏆🏆👍🇺🇲🙏 It's one thing to think of something, but it's entirely something else to actually make it and have it work.. Genius..., persistence will pay off👍 I'm no expert... But, what is you have a seat toward the back? It might add weight for balance lower the center of gravity. Thank you for sharing

@MakingStuff 2 года назад

Thanks!

@dennishein2812 2 года назад

Add counter weights, they do that with farm tractors and heavy equipment.

@gettosurfer 2 года назад

I looked in the parts listed in the video description. Couldn't find the axle.

@MakingStuff 2 года назад

makingstuff.info/Projects/Personal_Tracked_Vehicle

@nunolourenco1532 2 года назад

Reverse the lower buggy wheels and ride it backwards? Or move the whole engine to the back? Otherwise it seems you’ll have to move the engine a lot to the center. Lowering it also helps. If you are willing to sacrifice ground height, lowering the standup platform&engine would help a bit also, but a seated position seems a better option. And, don’t forget a squid plate on the front...

@MakingStuff 2 года назад

Thanks for the tips!

@kenlautsch4410 2 года назад

Hopefully you read this did you find brake master cylinder and caliper more than strong enough

@jwiereng 2 года назад

6:41 why not use plasma to cut holes for caliper mounting bolts?

@MakingStuff 2 года назад

Good question. It doesn't make small holes very well. I used to make them undersized and then drilled them out with a bit to et a cleaner hole, but that would often make the holes out of place or alignment. It easier to just drill them out manually when you are only dealing with 2 holes.

@0.1.0. Год назад

I like your cat

@jeffnoordyke9351 Год назад

Maybe this isn't a big deal but, are the tracks facing the right direction ? Just going by the tread pattern.

@MakingStuff Год назад

No they weren't when this was filmed. They were turned the correct way later on in the project.

@pecintaalatberat4555 Год назад

Tinggal.bikin bucket untuk langsir sawit

@NotaRobot_gif 2 года назад

What size chains are you using? Thanks!

@MakingStuff 2 года назад

#41 roller chain.

@sandasouthern9475 2 года назад

Was is the measurement for the track if it layed flat on the ground off the machine.

@MakingStuff 2 года назад

It's about 7" wide and 4 ft long.

@dogbreath312 2 года назад

I’m curious, I apologize if I missed this in the comments, but do you have drawings for this project? I really thought this was an outstanding vehicle. Kudos for this!

@MakingStuff 2 года назад

No, sorry

@resurrectionchopshop8471 2 года назад

What part of Tennessee are you in? I’m in East Tennessee

@MakingStuff 2 года назад

South of Nashville.

@victoryfirst2878 2 года назад

What I am wondering is what is the footprint weight of the machine and operator of pounds per square inch ???? Will this be able to turn without chewing up the grass ??? Thanks

@MakingStuff 2 года назад

It did not tear up the grass when I was spinning around in the snow. I'm sure if I stayed in the same spot and spin around several times it would tear up the grass. I think the pounds per square inch are rather low because of the amount of track that has contact with the ground. It barely leaves any tracks in the grass and dirt.

@victoryfirst2878 2 года назад

@@MakingStuff You are right on with your assuration of contact pressure. What is the machines weight, what is surface area of track contact pad and how many contact pads are their ??? Thanks This way I can figure out what you have pressure wise. Have a great day fella too.

@voyeger4464 2 года назад

standing area looks too small(it looks like it is just 12"-15"? )if you make the stand such a way that you can stand keeping your legs spread it would be helpful in keeping a balance during maneuvering the vehicle. Maybe you can weld a plate over the rubber track so you can stand up spreading your legs as you require.

@MakingStuff 2 года назад

It's 22" between tracks. I can't move them out any more than that due to the width of the diff. Thanks for watching!

@presh6969 3 месяца назад

How does it moves from left to right like steering wheel?

@MakingStuff 3 месяца назад

Steer with brakes.

@tedtenny 2 года назад

Be careful with electrical erosion when welding near bearings!

@JasonVladimir 2 года назад

Thanks for sharing your advice, Ted! I just learned something.

@randallservidio5919 2 года назад

It almost looks like your side frames (track assemblies) are backwards. If you swapped left side to right and vise versa in rev #2 it would work out better.

@MakingStuff 2 года назад

Yeah, I think moving the bogey wheels forward will fix that. Thanks!

@balloney2175 2 года назад

Hey Bob, your cat is watching (index 0:31). You better work properly. She said you don't have a plan, hence, the mistakes.

@nathanmccorkle4278 2 года назад

Just put the steering on the opposite side from the engine and ride it in reverse? I guess you'd need to reverse your drive with some gears though

@jaybakardi5470 Год назад

Would that be a slip diff?

@MakingStuff Год назад

Yes

@timwight9471 2 года назад

Will it be more like an atv or more like a tractor?

@MakingStuff 2 года назад

Just something to ride that looks cool.

@clayton203 2 года назад

What company makes that drive assemble,,limited slip, axle

@MakingStuff 2 года назад

Link in description and web page.

@clayton203 2 года назад

@@MakingStuff thanks

@lotuselanplus2s 2 года назад

Hi, another thing, what if you reverse the front road wheel, ie: make it a leading link instead of a trailing link, it would still articulate but it would be then 8 to 12 inches further forewards.

@diabolicalmachine 2 года назад

I was thinking this also but I'd be surprised if he has enough track length to do that.

@lotuselanplus2s 2 года назад

@@diabolicalmachine Compress each of the springs for the road wheels and combined they just might give enough free play to the track to get it done, would make the whole vehicle a bit lower to the ground and more firmly sprung at the same time.

@MakingStuff 2 года назад

Yeah, if I turn the bogey wheel assemblies around facing the other direction it will move everything forward 6 inches.

@lotuselanplus2s 2 года назад

@@MakingStuff I was thinking of turning the first and maybe the second one, not all because then with your weight on the back and a lot of overhang on the tracks it would always want to wheelie as it were,

@bonjournito 29 дней назад

Confusing! How you control the speed of the vehicle?!!

@MakingStuff 29 дней назад

It has a throttle.

@jwiereng 2 года назад

5:36 brake hose - not cable

@gregspangler5155 Год назад

dont need chain tentioner

@deanlutz7528 2 года назад

I'd put me a forward facing outrigger with a swivel wheel on it and call it a project. It might even save you from busting your you know what.

@surplusdoctor 7 месяцев назад

I would relocate the engine over center of gravity, and put a seat over the engine.

@johntaylor1947 2 года назад

better to have too much HP. than not enough.

@gregspangler5155 Год назад

make good snow dog

@paulwyleciol3459 2 года назад

not very clever what you said though: Why not extend the steering a little back and put the platform back on that you stand??? No additional weight, and nobody cares if the thing itself is unbalanced as it doesn't go without the "200 pound Gorilla" as the genious youtuber AvE would call you :-) Anyways: The whole machine is gorgeous, keep the good work up! THUMBS UP

@MakingStuff 2 года назад

Thanks!

@nutroll4205 2 года назад

Those plastic wheels are Gona fail. you should look for a different set of wheels that will last a little longer.

@MakingStuff 2 года назад

If they fail I can always make some better ones. Thanks for watching!

@gizmobowen 2 года назад

I'd like to suggest that your good luck is due to your feline assistance.

@MakingStuff 2 года назад

Yeah, that's Angel. She keeps all of the mice out of the shop. Thanks for watching!

@dave_ecclectic 2 года назад

Put some weight on and get fat like me. Then it will balance perfectly. (since it rhymes it must be true.)

Год назад

one of main advantages of track vehicle is the stability, which u've completely lost in ur design (hardly to call a design since mostly every part of ur experiment was experiment for it self o.O)

Год назад

man, with this whole project u will be only blocking half of turning power, when u could do vehicle to do 360 in place if u wanted to, with some more sketches and a bit more planning? (and few more welds and sprockets ofc) o.O

Год назад

this part i woun't even like ^.-