DJI FPV Drone Repair Tutorial for Broken Front or Back Arm. I Crashed my Drone and fixed it!! 

Let me know if this tutorial was helpful to you..

Did the flight simulator for 20 hours or so. Crashed the drone after my 2nd flight lol Thank you for positing this fix. It helps a lot.

Troncat does a superb job of this with explanation along the way.

Very nicely done.

So much disassembly to get to the arm. Pretty intimidating work. Great Job Sir!

Watched whole thing first, now time to do the hard work with you working right beside me, I'll stop it as I go. This is probably the best how to video I have ever seen, you cover from beginning to end! Thank you.

I got to hand it to you man!,you tore right in to it and got it done👍.Getting prepared to fix my front arm,watched the whole vid,thanks for the help.

Complete success! Thank you Up North Fpv. Barely slid out back arm, pulled rear antenna wire off antenna connection, but it crimped right back on easily. Took about 3 hours total taking my time with labeling and pictures. Probably 1 to 1.5 hrs next time. Yes...I said next time.

Man that is so much work to replace an arm! Maybe consider trying a carbon fibre freestyle style of drone, so much stronger, and also much easier to change an arm, typically two screws and three wires.

Super helpful! Thanks for posting. Way faster and easier than sending it in. Appreciate it!

Great video thanks. Although it might lead me to start taking more risks with my new drone knowing that I can actually fix a broken arm.

Going to repair mine tonight. Thanks for the content it should be really helpful

Thanks for sharing. that can help out alot of people.

Good Job Mate ! :)

thanks to this video my simple broken wing was a cinch, sorry chinese repair worker no won ton soup tonight.

Yes this is very helpful thanks

nice work dooder. Looks like you had the same issue I did. I had a HELL of a time getting the motor wires off the ESC. It took a ton of heat to get things to flow. Great work tho m8. Good on ya for not sending it back to Dji for that.

Thanks for posting ! I just bought one of these beasts and fear I might have to do this at some time in the future. DJI sure didn’t make it easy. You almost have to take the whole thing apart to just do ONE repair. ! It flew ok after ?? Thanks again.

Watching now. But should be like fixing any drone just arm comes with motors and leds attached already. Solder motor wire to esc (switch wires if spins wrong direction I guess) solder led wires. Screw arm on. Just it cost a lot more than my $4 arm and $15 motor and $0.50 racewire led

Thank you! I just know I’ll be needing a ton of spare parts now that I added the FPV Drone to my toy collection. I already had a low battery “let me force land this on THE HIGHWAY” incident. 😳 Fortunately, it was “CCP Virus Low Traffic” time…. I was able to retrieve it unharmed. I keep thinking it’s a Mavic 2 w/semi decent battery life.. compounded by the longer RC/RF range of OccuSync 3.0 - it gets approximately 25-30% better range / distance over OccuSync 2. You have a nice collection of videos and do great editing. Thanks.

I have not broken anything on my DJI Drone - yet, but surely this will happen. So it ist nice to know where to look as soon as it happens.... :-). .. PS: the process when dealing with the arms reminds me of struggling with a lobster... ;-)

great work :) Probably be needing this video some day :) I have the same work mat as you as well :)

I crashed my fpv got a little stupid with it. Anyway I didn’t use this vid but another one. I’ll say with no experience with building quads and very little soldering experience. With a little organization it went smoothly 3 hours about with a couple breaks it was back in the air. Had to swap two arms and the center frame. Pretty easy if your any kind of good with your hands totally fixable at home.

I'm kind of hoping dji offers other battery sizes and prop choices

I had to replace 2 arms and the main frame. But it was easier then i thought by using your video. Only problem i after i assembled the drone back together and plugged the battery it just keeps rebooting over and over. My question to you is my batteries sit for 2 months while i got the parts , i charged them but noticed that i couldn't read a voltage with the battery on. Which makes me think my problem is my batterys. If you guys have a meter do you see voltage at the plug connection? i dont.

I crashed my FPV last month . I send it to USA from Canada for repair . No DJI care . I paid $200 US for the repair , After one week when I got it back . The led light on front did not turn on . They ask me to send it back to fix . I decided not return and maybe I will try to replace one of the arm by myself . Hope your video will help , thanks

You did a great job. I’m handy with tools and could do this, but it is a bit much. Do you think the brace they sell would’ve prevented the break?

great I hopei dont need it,also because of spare parts...

Can anyone tell me what is the minimum amount of disassembly needed, if I only want to replace the vision sensors module and ribbon cable?

Hello sr. have a strange question here, Sorry for bothering again. I had to change the left front motor of my Dji Fpv. The issue is that to do it correctly I also had to remove the rear left arm. When reassembling everything, I had the problem that the rear left arm antenna cable connector came out of the cable, the problem is that the rear left arm antenna is inside the arm and cannot be accessed (it is not on the foot of the arm as if they are on the front arms). Not having the necessary tool to crimping the antenna connector to the cable itself. So i was wondering if i could splice the cable with another antenna cable that i have and use that connector, if not i have to buy another rear arm and in mi country is really difficult to do. i hope that it is explained well. Have a nice day and thanks again.

Where can I get the motor screws for under the motors

Is it possible to use the video transmitter standalone connected to a camera?

Where can I find those beats?

How hard was it to fish the wires for the new motor back through? Any special trick? I had a minor crash in grass and one of my motors has bearing noise now so im probably looking at an eventual replacement.

Makes a tutorial in fast motion with no commentary ... Wow

I just replaced my rear right leg but unfortunately the grey antenna cable broke out in the process. I already ordered another arm, but the drone still turns on fine. Do you think flying it with the antenna out is a risk? I feel like if it goes out of range it will just RTH but I'm not sure. Thanks

hi my dji fpv esc error

Step 1 throw it away. Step 2 buy a carbon framed fpv quad