DJI Osmo Pocket 3 - Best Cinematic Camera Settings 

Glad you enjoyed it!

Nice! Look forward to seeing what you shoot with em!

Thanks 👍

haha

The flatter the image the easier it will be to match others, but I have not done much testing on what negative Sharpness settings look like

I have not seen any data on the native ISO, I would guess 100 but ISO100-400 is super clean. To get and ND4 Filter effect, put the ND8 on and push ISO to 200.

The closer the subject you are focusing on is to the camera, the more bokeh you will see in the background

Yes you can

If your shutter speed is double frame rate and your image is too dark you have to shoot at higher ISOs (some scenes will be too dark to keep ISO at 400).

No that would be to heavy for the gimbal

There is more surface area of magnets on this one so it should be better. Also when the camera is off the camera lens faces inwards so it wouldn't be able to catch anything in your pocket as you are pulling it out

The Wide angle lens actually magnetizes to our filters but it creates a gimbal overload. So I don't think you can stack filters on the Pocket 3

As of right now we dont have one in the pipeline, but the ND/PL filters are my go-to for sure

Oh nice! That works too if you are not trying to color grade

Nd128 when sunny and ND32 when cloudy

If you are referring to filters, correct

No wide angle filters from us, they would be a bit too heavy for the gimbal

@@PolarProFilters thank you for your reply 🙏🏻

Either one will work fine

Probably best to find a specific video on that. Would be tough to type it out

If we see good sales volume we will start rolling out our other filters

The concept is to have your shutter speed at double frame rate, always. Usually when shooting outdoors you need a filter to help achieve this.

@@PolarProFilters thanks so much

There are excellent videos already on RU-vid about it

Not sure, I would try to reach out to DJI

They do not, the Pocket 1 filters are a little smaller

We make the filters, you get the footage!

The Pocket 3 filters will be shipping November 30th

Yes you will need to fully grade that footage

These Ship November 30th

@@PolarProFilters i read that, i hope you guys dont have delay, i will be on tour for over a month from mid december and hope i get them before i leave.

We have resellers in EU, but they do not have stock yet

They are available for purchase now: www.polarpro.com/collections/osmo-pocket-3/

Would love to help but that’s going to require DJI troubleshooting

haha whats wrong with Mario?

@@PolarProFilters Nothing at all. :)

We did the ND8/32/128 because we did not see any need for the 8 stop ND256. This allows us to include the ND8 instead of the ND16 which is better for golden hour. You dont need ND16/ND64/ND256 if you buy our set. You use ISO to accommodate the stop differences. Ex. If you need an ND64, install our ND128 and push ISO from 100 to 200. If you need n ND16, install our ND32 and push ISO from 100 to 200. Using ISO under 400 is way better than constantly switching filters when you need to change exposure by 1 stop

haha idk I have to talk to the boss on that one

same concept, your shutter speed should be double frame rate. 1/50th and 1/100th respectively

@@PolarProFilters I know, but some begginers don't know.