No video :(

DMEX vs Morimoto MLED - Bi-LED Projector Comparison

Подписаться 23 тыс.

Просмотров 46 тыс.

50% 1

Check out the selection of upgrades for your vehicle at www.lightwerkz.net
Lightwerkz specializes in custom automotive lighting upgrades for all makes and models. We offer the best brands in custom automotive lighting and also offer services to customers all around the world.
Contact us today for additional information.
Phone: 201-644-0337
Email: info@lightwerkz.net
Follow us on social media!
Facebook: / lightwerkz
Instagram: / lightwerkz

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@cadillacats-qb8nr 6 лет назад

Thanks for the comparison, it helped me decide what to buy. Went with the DMEX and what a great final retrofit install as everything is inside the headlight with no external drivers, very clean and OEM looking. You wouldnt know from looking at the headlight that it's led vs factory halogen until you turn the lights on. The fans make almost no noise and the light output is much better than halogen (but still not as good as HID). I am good with the DMEX E2 projectors and their light output. I made some videos of my retrofit if your interested. Please keep in mind this is my first time doing this and there was a lot of trial and error but in the end the simplest setup was what worked.

@DrToly 6 лет назад

Looks pretty good - it'd be great to see more videos and info from you guys on this projector!

@stoneshi8193 6 лет назад

Thanks

@AlexeyGalas 6 лет назад

your version of DMEX is with Osram or Korea led chip inside?

@therealb888 6 лет назад

I like the warmer colour too like the Koito. It's really the best for usability.

@LightwerkzGlobal 6 лет назад

The koito has a lot of blue to it.

@therealb888 6 лет назад

Thanks for replying, sorry I hadn't seen this before. I was speaking about the koito bi-led projectors (DM008). It's noticeably whiter than the M-LED.

@therealb888 2 года назад

@@LightwerkzGlobal I never got a reply. Are you referring to the blue fringes or the color of the beam on the road?

@LightwerkzGlobal 2 года назад

@@therealb888 Please understand this is not a customer service platform. If you want to discuss anything in detail its best to reach out to us directly. None of the projectors here are really used any longer in the retrofitting world. When you modify the Koito with a clear lens you will have some blue color at the cutoff line. In stock form not as much color flicker but the color is definitely on the cooler side. Newer age factory LED projectors I believe have gotten a little warmer now. In terms of most OEM like color on aftermarket projector, the MLED 2.0 is pretty nice.

@ardoin_337 6 лет назад

DMEX: morimoto quality at DDM tuning prices.

@ThatGuyKappa 5 лет назад

The dmex ive found were the ones with cap Korean led chips, if I were to buy I'd buy the dmex save money and maybe mod with different leds, what leds they use in the morimoto ?

@sreckousorac7361 6 лет назад

which is better : DMEX vs I. Lens, expecially width?

@Garred34 6 лет назад

Hey guys. could you do a video that shows the light output of a stock 2015+ F150 fog lights with LED bulbs, vs the Morimoto LED fog lights? I'm trying to figure out if it's worth the $200. Thanks

@borislavtodorov6191 3 года назад

How compare morimoto mled vs strong led in projector

@cirealreviews1776 6 лет назад

is DMEX a Chinese brand? I've seen their HID kits for $60-80, are these really Hylux ballasts like advertised on their ad listings?

@dmex728 6 лет назад

Yes,Friend,DMEX is a Chinese brand,and Our selling is the really Hylux ballast.Thanks

@therealb888 6 лет назад

Damn I wanted to do the same thing months ago!. But didn't contact them as I don't have a big channel!

@kellewra5770 6 лет назад

DMEX Led CHIP?

@rodrigomelo9801 4 года назад

low ? and high ?

@ratkocosic89 5 лет назад

How do you install the dmex in a headlight assembly since it doesn't have a threaded shaft?

@plutonium9 5 лет назад

You would use Nuts and Bolts attached through holes drilled in the rear of the reflector housing you are retrofitting into.

@behzad36 6 лет назад

Where can I buy DMEX Bi led projector from? I only found them at Alibaba, but they do not sell fewer than 10 pairs of led projectors.

@adisdedic96 6 лет назад

aliexpress

@Nick-ko1tw 5 лет назад

Aliexpress. They also sell other brand of bi led projectors. Usually i prefer non-chinese product, but for electronics, the chinese ones are actually pretty well made.

@therealb888 6 лет назад

That's a test?! Where tf is the width comparison?!. By the way thanks for not rebranding it!

@kylermahoney3761 2 года назад

😂

@therealb888 2 года назад

@@kylermahoney3761 You have no idea how much I was involved in these retrofits back then & how much I was disappointed with US market. Are you going for these retrofits now though?

@kylermahoney3761 2 года назад

Yes, I’ve been debating mLED 2.0 but I’d like to put in a quad setup in my 2011 Corolla if I have the room. And 400 bucks a pop is expensive to put in quads so I’m hunting around for a cheaper bi led and I really like the warmer color of the dmex projectors. I’m not a huge fan of the white led color but really I’m just looking for the most light and the most usable light I can fit in my headlights. I live in Alaska and I want the best light I can get

@stokedGSXR 2 года назад

@@kylermahoney3761 😂

@teligon 2 года назад

@@kylermahoney3761 You might be lucky to squeeze a 2.5" projector in the high bowl, and if you can, there are limited options if you want quad low beams and quad high beams, or will settle for dual lows and quad highs. For the high beam, you can consider a 2" HID or bi-LED, but you will be very lucky to find one below 6000K. AES has a 1.8", 2.0" and 2.5" that are all "family", and they're not the best on low beam as beyond the hot spot is a dramatic reduction in output and tons of foreground light. But they are indeed wide as far as you can see the cut-off line, but not much usable light extends that far out. At the hot spot, it literally white-washes everything in its path and is very potent at casting light down the road.

@pepeclavito9923 4 года назад

i stay with hid 200w 4300k ,,better than leds no comparision if you want dumn bluelish looks led..if you want to see at night for real hid all the way

@mostafamohammadi7855 6 лет назад

Thanks for the test but its better to visit a doctor dear caesar 😁

@jinzheng5347 3 года назад

I am the manufacturer of car lights from china , our main product is LED&Laser projector for car lighting upgrade and also customize the lighting based on your requst. if you are intereted I can send you more infromation about laser projector , I believe our laser projector can sell well.may I have chance to do business with you

@megAtiTuDE 6 лет назад

The mled actually have a very terrible output. That Dmex/AES, is way superior.

@aleksandrshik9208 6 лет назад

I have M-LED and I have to agree with you on the output

@artcore9886 6 лет назад

Please expand on this. I have mini H1 and i'm not happy with the output, was looking to upgrade to MLED.

@bashkhaled 2 года назад

@@aleksandrshik9208 your M led is different than the current Mled 2.0 ? i don't know if i should get the DMEX instead of the Mled 2.0 , Dmex $90 and the M-led 2.0 $450

@aleksandrshik9208 2 года назад

@@artcore9886 basically MLED v1 has very narrow hot spot and beam is not uniform and absolutely no width. You have to run wide fog lights to see adjacent lane.

@aleksandrshik9208 2 года назад

@@bashkhaled yes price for that is unbeatable but I would go with NHK if I were you.