Do THIS to your C8 Corvette & NEVER have Brake Dust again!

Подписаться 74 тыс.

Просмотров 61 тыс.

50% 1

Do THIS to your C8 Corvette & NEVER have Brake Dust again!
Ladies and gentlemen, this is a DYI brake pad and rotor replacement on a 2023 C8 Corvette! We will show you how to eliminate brake dust, period!
Links
Carbotech High Performance Pads 1521 Series Part #CT 28951F 1521 #CT 28951R 1521
Where To Buy
ctbrakes.com
Currently On Sale at Paragon
www.paragonperf.com/carbotech...
www.paragonperf.com/Rear-Pads...
R1 Concepts Slotted and Drilled Geomet Series Part #634-47084R #634-47084L
www.r1concepts.com/
Wheels & Tires
20x9.0 Front 21x12.0 Rear ForgedLite MC5's
Michelin Pilot 4s Tires 255/30/zr20 Front 325/25/zr21 Rear
ForgedLite 100% Forged Wheels exclusively through Wheel Designers
Use Code: BOS for $100 off set of wheels, Free Shipping & Lug Nuts
wheeldesigners.com/
forgedlite.com/wheels-mc5-1pc...
Get 15% off your first order by going to this link.⬇️
UndrDog Product Link: getundrdog.com/brinkofspeed
Support this channel by clicking the link below and subscribing!
Click here to subscribe: / brinkofspeed
Welcome, you are now a part of my community!
Email:
bos2020c8@gmail.com
Cgarnerspeed252
ru-vid.com/show-UCEQi...
CC&T
ru-vid.com/show-UCm6_...
Music:
Amazon Links:
Adams Tire Shine: amzn.to/2TSYb9k
Adams Detail Spray bottle: amzn.to/2E2FMlE
Adams Detail Spray 1 gallon jug: amzn.to/2P4Qp8N
Adams Ultra Foam Shampoo: amzn.to/2Q2l4Zy
Adams Car Shampoo: amzn.to/2TUY8d6
Sony AX53 Camcorder: amzn.to/2r98sB1
GoPro Hero 5 Black: amzn.to/2SkyI7d
Drone Mavic Pro: amzn.to/2rb5f
#c8brakes

Авто/Мото

Опубликовано:

24 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 227

@BrinkofSpeed Год назад

Hate BRAKE DUST? Watch this!

@williedavismckennie5334 2 месяца назад

Greate video, I,m doing my brakes this weekend after 48K miles on my 2021. I only drive in the summer because I live in Chicagoland.

@envywhyenvy Год назад

WOW, that's awesome!! As soon as I get the Corvette that I will keep; I'm definitely doing this upgrade combo ASAP!!

@1976mrjoey Год назад

Like always thanks for the good content. I'm waiting on my C8 to get out of jail, this is the first thing I'm going to do.

@p.d.414 4 месяца назад

Mike, I watched this video and went and ordered it all and did it all by my wee self. I'm definitely going to do this every time now. Liked how you guys didn't even have to bleed the brakes awesome.

@frankprettitore6192 Год назад

excellent job guys...

@z06doc86 11 месяцев назад

The more mature guy likes chrome. You go dude!

@PLLuxuryReviews Год назад

Awesome demo video 🎉

@BrinkofSpeed Год назад

Thank you, I’m glad you enjoyed it! 👍😊

@Howdy762 Год назад

youguys are so lucky to be such great friends and work on each others cars

@BrinkofSpeed Год назад

I agree, God has blessed us all with great friendships. 👍😊

@biggdoggg372 Год назад

This is soo true. Every time I see them I think I wish I had a friend like this.😅

@regsmith7604 11 месяцев назад

I had R1 concepts cross drilled slotted rotors, front and rear, on my ‘08 coupe, with PosiQuiet extreme duty ceramic pads back in ‘12. I learned to put a little never 👎🏽 seize on the face of the hub to keep the rotor from sticking. R1 concepts, them youngsters are into it.👍🏽

@tonydibartolo191 Год назад

Made it look easy, thanks

@nrdemon1031 Год назад

It really was pretty easy especially if you have someone help you out.

@HAWK_Ben_G Год назад

@Brink of Speed - Bruddah Mike, I thoroughly enjoyed this great video. Kudos to all your video streaming efforts! Best Regards to Darren, John, and Mark. Ladies and Gentleman in the Brink of Speed community, Wishing all Happy Holidays Gracefully and a Mindset of Peace! 🙏 ~ Ben G. / NYC

@BrinkofSpeed Год назад

Thank you, I’m so happy you enjoyed it. Happy holidays to you as well. 👍😊

@ProtectiveDadPranks Год назад

I could care less about the brake dust. That’s a secondary bonus for me. For me, can we admire how good this looks!!!! Wow!

@petercarey6883 Год назад

Your thumbnail stating "never have Brake /Dust Again" is what caught my eye. To me the only "Never have Brake Dust again is with the Carbon Ceramic Brake setup. I'd like to see a comparison in order to become a believer if that's possible. Thanks in advance Mike. Save the Wave 🙋‍♂

@BrinkofSpeed Год назад

These will be really good to eliminate brake dust, but maybe not as good as ceramic pads and rotors. He’s already put 100 miles on them though and you can’t see any dust on the wheels.

@petercarey6883 Год назад

Thanks Mike. I went with the Hawk brake pads that everyone recommends, but I still get the dust. It's a different lighter color so it's not so noticeable, but dust is dust. I may just have try his pads. Save the Wave🙋‍♂

@BrinkofSpeed Год назад

@@petercarey6883 You’re welcome. 👍😊

@NO1CAN007 Год назад

Awesome video... I was going with this same concept except no slots just drilled...NICE!!!

@BrinkofSpeed Год назад

Thank you, I’m glad you enjoyed it! 👍

@NO1CAN007 Год назад

@@BrinkofSpeed You're awesome Mike and so detailed... keep doing what you're doing...

@travelingman8230 Год назад

Well done video Mike. I think you may have inspired many C8 owners to do our own brakes at the very least!! Great video. Look forward to the follow-up to the outcome of changing to Carbotech pads!

@BrinkofSpeed Год назад

Thank you, I’m glad you enjoyed it. 👍😊

@TheFlightman58 Год назад

Need to change my pads on my GS that brake dust ! 😎

@cee13b Год назад

Great video

@thomasangelo4219 Год назад

Is great job They look really awesome

@BrinkofSpeed Год назад

Thank you, I’m glad you enjoyed it!

@jonbrickey6275 Год назад

Great video guys!

@BrinkofSpeed Год назад

Thank you, John, I’m glad you enjoyed it and thank you for letting us use your awesome garage and lift! 👍😊

@nrdemon1031 Год назад

You should order a set for your new car, they are rarely on sale, this weekend at Paragon they have a deal on them.

@Hangin_With_Shane Год назад

Nice jobs boy's! Will be interesting to see the difference the new brakes make in stopping power and less brake dust! Be well -Shane

@BrinkofSpeed Год назад

Thanks Shane, it sure will.

@prule1335 11 месяцев назад

Did the vendors give you the pads and rotors??

@2020matrix8 Год назад

I did the same thing after about 500 miles.. only I used the Girodisc slotted Rotors. Brake dust is gone. Although you will still have to deal with road dust lol

@NuHorizonC8 Год назад

Awesome video guys! That was such a good easy solution using the bungee cords! Looking forward to installing my pads too!

@BrinkofSpeed Год назад

Thanks Carlos, I did make things easier. 👍😊

@vegasmitch1472 Год назад

Those Rims are NICE!!!

@nrdemon1031 Год назад

They are Forgedlite wheels form Wheel Designers

@everjeff Год назад

Awesome job guys! A lot easier than I was expecting.

@BrinkofSpeed Год назад

Thank you, it sure was Jeff. With Darren and Mark doing the job, it was a piece of cake for me 😉😊

@johnl.navarrette2053 Год назад

Hey Mike, great episode and great job on brake upgrade install, thanks for sharing!

@BrinkofSpeed Год назад

Thank you, I’m glad you enjoyed it!

@stephenr115 Год назад

Wish you guys lived down street from me! How about a BOS “surprise visit” as part of Octane Hour. Bring the tools!

@BrinkofSpeed Год назад

That would be cool!

@glen1094 Год назад

I didn’t see it in the description but could you share which model of quickjack your buddy has? Extenders? Looks like it fit perfect for you guys, so curious which one it is. Great video!

@MARKWHITE007 10 месяцев назад

At least I know now I need to hire somebody to do that.

@JerryCecco Год назад

I've been using Carbotech pads for about 10 years on my 2012 Boss302, 2012 C6Z06 and 2017 C7Z07. Great for street and track use. Mike Jr A CarboTech

@BrinkofSpeed Год назад

Heck yeah, I think Darren will enjoy these big time. 👍😊

@nrdemon1031 Год назад

Mike Puskar at Carbotech is great he takes the time and answers any questions you have.

@calbeer Месяц назад

I thought Carbotech 1521 is for street use only? Not track use? The Carbotech XP12 and XP 10 dust a lot, but offer good track performance

@harveymiller4DD 9 месяцев назад

Did I miss finding the link for the nylon impact wrench socket covers? Great channel! I work on a lot of Corvettes, #getundrdog

@stephenr115 Год назад

I’d totally F up this

@doughooks7411 Год назад

Me too, Brother!

@derrickdunlop3566 Год назад

I swapped mine out upon delivery at 12 miles with the 1521s and never looked back! My wheels are ceramic coated also; hardly any brake dust!

@nrdemon1031 Год назад

Great to hear, the z51 factory pads crush you with dust, looking forward to not having to clean my wheels every time I take it out.

@BrinkofSpeed Год назад

That’s awesome man!

@dalemeyer5363 Год назад

Your lucky you didn't lose any fingers! You need to unplug the battery when working on your breaks so it doesn't run a test cycle while you have your fingers between the pads. Please watch out!

@charlesb5007 Год назад

I have some sweet looking AeroLarri wheels and so tired of driving five miles and having dust everywhere

@RobertMacCready 3 месяца назад

Did this with one of my Corvettes a while back. Got rid of the brake dust but the car doesn't stop as fast. Will never do it again.

@joelpierce3940 Год назад

Mike, I put up with dust because I trust the Engineers and I track my car. I believe the pads are sacrificed instead of the rotors. Some people go to shows.

@kurtthomas4746 Год назад

Nice video, I changed my brake pads on our C8, 2012 C6 , 2021 TRX, all to Power stop Z26 or Z23s, both great pads 80-90% less brake dust, made the carbon tech pads are better for track, but as daily driver, the power stops, a lot less$$ and work great. Keep up the good work guys.

@BrinkofSpeed Год назад

Thanks Kurt, I’m glad you enjoyed it, and thank you for the heads up on the other pads. 👍😊

@TheFlightman58 Год назад

Wow ! 😎

@rogerdaye1668 11 месяцев назад

@brinkofspeed Great Video... but off subject - where can I get those Sunglasses 😎?

@briantoh7781 Год назад

Great

@3000GTpro Год назад

Hopefully Darren has better luck with R1 Concepts rotors than I have. My experience with those on a different car is that they warp too easily. I would not recommend them for anything beyond normal street driving, and especially not for track driving. If I were you, I would have chosen Powerstop rotors if they're an option for the c8, because I have used their blank rotors with the Powerstop Track Day pads on my current car (not a Corvette), and those rotors held up AMAZINGLY well with the performance of those pads. Otherwise, thank you for showing how this is done. I thought the rear calipers having removable pins vs the front calipers not having removable ones was unexpected.

@BrinkofSpeed Год назад

I hope so too. He won’t be tracking his car so it shouldn’t be an issue. They learned after doing the driver side rear, that they could do it that way, so we filmed it that way. You can do the fronts that way too.

@izzycamaro Год назад

Great video ....Brink of speed[e

@BrinkofSpeed Год назад

Thank you, I’m glad you enjoyed it!

@roccotoulon4031 Год назад

More videos like this please. Best video yet. Reminds me of Speed Phenom. Happy Holidays!!!!

@BrinkofSpeed Год назад

Wow, thank you, that is a huge compliment. I’m glad you enjoyed it! 👍😊 Happy holidays to you!

@billmiller8782 4 месяца назад

Should also remind people, if they plan on working on the brakes - especially removal of the calipers --- to disconnect the battery 1st - as the car could go into a auto-brake check at any time and possible hurt / injury them - especially if they have there fingers in / amoung the pads when the car does an auto pressure test , etc.

@StupidFastTruck Год назад

Great how to video. Looking forward to a review.

@BrinkofSpeed Год назад

Thank you, I’m glad you enjoyed it!

@albertthomas4189 Год назад

I enjoy watching your channel, was trying to find the one where I believe it's same guy doing this break change did one were he doing inside leather protection. Was it on your youtube?

@nrdemon1031 Год назад

Here ya go…. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BsWkt9G1pgw.html

@phetdiamondc8802 Год назад

Hi Mike , my name is Phet I enjoyed watching your video good infor. I have c8 2022 3LT accelerator yellow with the interior like the yellow C8 R edition. I like to know it that true you you can not order like that anymore? Also I would like to know how many C8 2022 were builded in 2022. Can you do a video please. Thanks keep up the good videos

@tee1up495 Год назад

Oh man, I really wish you had shown where you placed the Quick Jack under the C8. I have one that worked great for my C6, but the 2023 C8 jacking points are just out of reach for the lift. I'd really appreciate a video of the jacking locations and process. Thanks from Austin, TX

@nrdemon1031 Год назад

Same with this one we were just before the jacking points, but on the frame so it was fine.

@paullemmons6732 Год назад

Will this set up prevent the horrible squeaking I get with my Z51 pads and rotors

@frankg4551 9 месяцев назад

Mike, well done video.(5-stars) I have an unrelated question. I'm having problems with my 2021convertible. The convertible top Its not working, I call some of my local dealers and they haven't reach back so I subscribe to a C8 forum and found out im not along. Its been a problem with some convertibles and they haven't got a fixed. The rear window doesn't come down and the convertible doesn't operate, the tonneau lid does works up and down... thats it. Maybe you guys can help me out or find out who can. Im in central Florida(Orlando)

@brucelittle1000 Год назад

do you have a link to that "quick jack"?

@chrisparker4940 Год назад

Great editing as always 👍🏻

@BrinkofSpeed Год назад

Thank you 😊

@bhvrdr 11 месяцев назад

Keep in mind the carbotechs have pad overhang on the rear, they have no wear sensor springs like the OEM pagid and no shims like the OEM.

@phetdiamondc8802 Год назад

What model quick jack he use?

@WhyDidYTstartThisHandleShit Год назад

you forgot the backer plates which you should pull off the back of the stock pads. also, need to disconnect battery AFTER leaving the door open a few inches.. and open the cap of the master and leave cap sitting on top so stuff cant get in. the stock pads are crap though, you've got the right idea.

@jamesm.3338 Год назад

Ceramic brakes better suited for the track? You need to heat them up to get the braking power desired.

@jariallen653 Год назад

My bad must watch entire video, lol

@cassiespencer6134 Год назад

My C7 ZR1 generates virtually no brake dust which I attribute in large part to the carbon ceramic rotors and OEM brake pads. In fact I can swipe a finger across one after driving and there's no dust on my finger tip. Whereas on my dad's C6 ZR1 there is since it has steel rotors.

@BrinkofSpeed Год назад

Yep, carbon ceramic rotors and pads are an amazing combination!

@puny-tinsucks5102 Год назад

posi quiet pads are quiet, the main thing is to have quiet pads first, worry about the dust second, dust can be cleaned off, noise goes on and on....if these are quiet and less dust then thats a bonus

@bcr003 Год назад

is this intended to be a tutorial? Cause I certainly learned everything I'd like to know about swapping out pads on the C8. Great Vid!!!

@BrinkofSpeed Год назад

It sure. I’m glad you enjoyed it 👍😊

@user-pf2ds4wx1k 4 месяца назад

Hi guys I did the exact same procedure. After my car went into limp mode for the brakes. Could drive over certain speed. BRAKE system warning lights code errors. Found Out You need to disconnect the neg battery terminal. I pushed my pistons back a bit further than yours. The system reset when i disconnected and reconnected battery. Other videos on you tube recommend this first step of leaving battery disconnected. Wish I'd watched those first

@David6769NHRA Год назад

Great educational and informative video please do a follow up video for the break dust.

@BrinkofSpeed Год назад

Thank you, I’m glad you enjoyed it!

@nickm8651 Год назад

I heard that if you don't peal off the thin plate from the back of the Brembo break pads and put then on the Paragon pads that it will make one haed click sound when putting on the breaks. Not sure what's causing this but, the installer said had to add the thin plate on the Patagon pads to eliminate the one click. Please let me know if that's true, thank for the video.

@bossnutz 3 месяца назад

Do you need to change out the emergency/electrical brake pad?

@kennethmurphy4802 11 месяцев назад

Great video like always. Now that I finally have my C8 and see all the brake dust I watched this for the second time. Can you answer one question for me. Do you have to change the rotors or can you just change the brake pads?

@nrdemon1031 11 месяцев назад

You can just change the pads.

@kennethmurphy4802 11 месяцев назад

Thanks

@stevepen Год назад

I’ve installed these on my C8 and the stopping power felt the same and brake dust is reduced but it certainly hasn’t been eliminated.

@NoSh1tSherlock Год назад

The bite isn’t remotely close to the same. Come on now. I’ve had both and it’s night and day

@amill1563 Год назад

I use Akebono pads and they also do that. They are Scotty approved. Akebono makes pads for many car brands. Always nice to see project cars improve.

@jameshockenberry7030 Год назад

Great video, I want to change rotors on 23 non z51,what did you do with electric parking brake to release, wasn't it on when shifted to park and exit car thanks

@nrdemon1031 Год назад

No issues, it was not on.

@kerry_glock Год назад

The Brake Dust is possibly my “Top Complaint”!!! Otherwise, there aren’t too many in the first 1,100 miles. Passenger “Blind Side” comes in second. Winter Hibernation/Stones on the roads/Waiting for Spring😂

@nrdemon1031 Год назад

I agree on the blind spots, I just ordered the Paragon wide angle mirrors.

@BSTDC8 Год назад

I got these pads and though the dust was significantly reduced each drive does sill require a quick cleaning of the rear end of the car. Title was a little misleading, I was hoping there was something I didnt know.

@frankiemaddalena1597 3 месяца назад

Say do u have to change the stock rotors

@markward9712 Год назад

On my brother’s 22 z51 the front pads where glued on and took a minutes to get off.

@nrdemon1031 Год назад

Most have said that, mine as you saw practically fell out. But my car also had very few miles.

@williamorton7600 10 месяцев назад

Yep, mine were glued on [2100 miles]. Managed to cut the piston boot trying to separate the piston and pad. Luckily piston boots are simple to swap out. But when the piston falls out, if you didn't pull the battery cable, then you're screwed. You get air in that corner. Can't bleed it with battery cable connected. On the positive side, now I know how to pressure bleed C8 brakes.

@JohnnyBfromPeoria Месяц назад

As others have said, a decent set of carbon ceramic pads alone would take care of the issue.

@briantoh7781 Год назад

I have try to order the set of rotor at R1 Concept and it shows that they do not have for c8 corvette.? May i ask for the parts number instead. Thanks

@travishackney7771 Год назад

I was hoping that you would tell how much the set of up grade brakes cost

@nrdemon1031 Год назад

Pads under $500 and Rotors about the same if you choose to upgrade. Total is $1,000

@legod1717 Год назад

Awesome video! Great job explaining everything guys.👍 Good camera angles too to show the work. Thanks!👍😎

@BrinkofSpeed Год назад

I’m happy you enjoyed it. 👍

@z06doc86 Год назад

It’s my understanding that you should disconnect the battery prior to removing calipers. Apparently if the key fob is accidentally activated just right, the computer wakes up and applies brake pressure through the electronic brake system. Obvious disaster if this happens.

@nrdemon1031 Год назад

Yes and If you open a door the same can happen.

@speed6725 21 день назад

I think it’s ridiculous that if you get a Stingray with the Z51 pkg you can get nice calipers. But if you order a Z06 with the Z07 pkg you can get that crappy gray caliper.

@Kbauer1809 Год назад

Wondering if you can keep the stock rotor with the Carbotech pads?

@nrdemon1031 Год назад

Yes you definitely can and most do.

@BrinkofSpeed Год назад

Absolutely 😊

@budhorstmeyer9336 Год назад

Remember to do an update vid before the next wash to see the dust difference. I have a 21 C8 w the Carbon Flash rims. I hate the dust. The rims can be clean and in 15/2 miles of city driving they are coated. I’m definitely doing this. Cost?

@nrdemon1031 Год назад

I’m 100 miles in and I can tell you dramatically better, 90% less dust. Highly recommend this upgrade.

@nrdemon1031 Год назад

Pads and rotors if purchased on sale about $1,000 for everything, some great sales on both this weekend. Paragon has the best prices on the pads, R1 Concepts is doing 30% off with code: VIP30 part numbers are in the Video description.

@budhorstmeyer9336 Год назад

@nrdemon would you think it’s necessary to replace the rotors with the drilled rotors, over the OEM rotors? I have less than 4k miles and it has t been tracked…yet!

@nrdemon1031 Год назад

@@budhorstmeyer9336 no not necessary, OEM ones will be fine on the track, I personally like the look of drilled and slotted rotors and since I knew we would have the calipers off in the front I figured now was the time.

@peterrabbit2719 Год назад

Just change the pads. The pads only create the dust not the rotors. Drilled and slotted rotors are just for show. If tracking drilled rotors will get hair line cracks from the hard abuse and heat. Slotted rotors stay cooler than solid rotors on track. These guys need to put back on their gold chains.

@joeyofblades 20 дней назад

So is there any way to have these cars on regular jack stands? Really not looking to spend $2000 on quick jacks 😑

@phetdiamondc8802 Год назад

I saw some Video on RU-vid the guy changed the break pads and got all break light came on. Do you have to disconnect the battery first so you won’t get the break light warning. That what I’m afraid of if I change mine out. I got z51 break pad And I hate it to much dust.

@nrdemon1031 Год назад

We did not disconnect the battery and made it a point to not open the door during install. 100 Miles on the car and no brake lights.

@NO1CAN007 Год назад

I heard you had to disconnect the battery before you did that or the car will go into limp mode is that true?

@nrdemon1031 Год назад

We did not and no issues.

@mister.wizard 4 месяца назад

So there is only 1 screw holding the rotor on? It looks like there are 2 holes for that on the rotor, but I only saw 1 screw.

@garyblakely3000 11 месяцев назад

I installed ceramic brake pads on my 2010 GS when it was new. It reduced brake dust ~80% and still does. But I did not change rotors. Why did they change rotors in this video?

@nrdemon1031 11 месяцев назад

Looks, drilled and slotted vs. plain oem rotors.

@zaddy_andre__ Год назад

can you put these brakes on a non z51?

@nrdemon1031 11 месяцев назад

Not this brand, but other brands are out there for non z51 cars.

@kevindavidson2291 11 месяцев назад

So how did it stop/feel!? It's been months of testing🙂

@nrdemon1031 11 месяцев назад

Brake dust is 90% reduction, braking is about the same over stock, biggest difference is the brake dust and appearance.

@dougsmith389 6 месяцев назад

You must disconnect the battery first.

@imdeplorable2241 Год назад

Easy peazy, japanezy. Trade Mark for Darren.

@BrinkofSpeed Год назад

Lol 😊

@greatwhitenorthcorvette8133 Год назад

I hate break dust! Sick of wash ing my rims! Do you have to change your rotors?

@nrdemon1031 Год назад

You do not, most will use these with OEM rotors. Paragon has the best pricing, they are on sale now, you won’t regret it. I have 100 Miles on the car and almost no brake dust, dramatically better.

@BrinkofSpeed Год назад

We hate it too Andrew. 👍😊

@kerry_glock Год назад

When are you required to disconnect the Battery when working with the Brake System? I recall hearing that, but don’t remember where or from who…..

@jimmydahawk88 Год назад

From what I've seen you only have to disconnect the battery if you open the hydraulic system. Like bleeding or changing fluid or replacing caliper

@nrdemon1031 Год назад

Some say to we did not, apparently the reason you would is if you open a door the Calipers compress. So if you don’t open the doors during install you will be fine.

@acandr1 Год назад

Just leave key fob away from car so self check doesn't happen , the hydro pump will check brakes. Also perform parking brake calibration with new rotors.

@cotto22 Год назад

Wondering if this company will make the slotted/drilled rotors for the Non-Z51 C8 Stingray. I've been looking, but seems as though no one is making them.

@nrdemon1031 Год назад

I believe R1 Concepts does have rotors for non z51 cars, give them a call and they will confirm fitment.

@cotto22 Год назад

@@nrdemon1031 they do have them. But the carbotech brake pads are only made for the Z51 C8. I may have to go with R1 Concept pads, unless you have a reco. Thanks

@nrdemon1031 Год назад

@@cotto22 I think the R1 pads would also be good, or Hawk, if you talk to R1 mention the channel and ask for 25% discount they should give you one.

@cotto22 Год назад

Thanks I did get the rotors. I will think about the pads

@nrdemon1031 Год назад

@@cotto22 if you have a z51 car you will want the pads, other brands out there powerstop and Hawk are lesser expensive.

@valeriovalentini1365 11 месяцев назад

Is this arctic white or ceramic matrix gray metallic?

@nrdemon1031 11 месяцев назад

Pearl White Metallic, exclusive to the 2023 Anniversary edition

@valeriovalentini1365 11 месяцев назад

@@nrdemon1031 Really? But if I want to buy this car I can only choose between arctic white and ceramic matrix gray metallic. I am wondering which was the colour of the car displayed at Apcot (Disneyworld) on the 19th of April.

@RobertSmith-fb9qv Год назад

What brand of rotors did you put on? Same as the pads manufacturer?

@BrinkofSpeed Год назад

@r1concepts

@SKRooU2 Год назад

I have known ceramic pads to reduce brake dust for about 20 years. Get Blackhawk pads a lot cheaper and are top quality and you don't need new rotors on a new c8 lmao

@jerryg4111 Год назад

Got the Carbotech pads coming. R1 Concepts says they don’t have rotors to fit my 2023 C8 Z51 HTC. 🤷🏻‍♂️ Anyone have a suggestion on drilled/slotted rotors that won’t break the bank? Thanks

@nrdemon1031 Год назад

They have them as those are on my car, the item numbers are in the description. Whoever you spoke with must not have realized they are the same for 2022-2022.

@jerryg4111 Год назад

@@nrdemon1031 Thank you. I will give them another call in the morning and hope to get someone different.

@nrdemon1031 Год назад

@@jerryg4111 give them the item numbers in this video’s description. Good luck, let me know.

@jerryg4111 Год назад

@@nrdemon1031 I am being told they are out of stock with no estimate when they will be available. To check back in 2 - 3 months. 🤷🏻‍♂️

@RICARD01 Год назад

Rotors are on backwards. 😊

@fordmaster50 Год назад

Good vid & I'm very interested in these pads! However, more than half of the dust comes from wear of the rotor. Look at the PCBR on the Porsche Taycan Turbo. We have developed a process to treat rotors for zero dust & 1800% wear improvement over the non coated rotors! Our problem is finding a brake pad that can keep up with the rotor!!! What are you doing with the factory rotors? Maybe I can coat them for you?