Dodge Charger 3.6L Swap To 6.4L V8 Scat Pack 

You are a smart man. Cheaper to build a v8 hemi than buying a whole car with a v8 hemi engine

This video inspired me to do the same, but I’m taking it a bit further I took apart the engine entirely and going back with full forged internals so I can boost it! I wanna be able to leave 5.0s in the dust. Anyways keep the content comin brother I’m here for it fr 💪🏾🔥

looking foward too seeing the build brutha also definitly appreciate you spreading the knowledge on savin money with builds

100% percent agree with you. If the car is paid off then you’re fine you can do whatever you want. Dropping a custom 392 hemi engine from the scat pack is a good thing because you’re saving a lot of money and you don’t need to buy a new one. The looks of the charger SXT don’t matter but what really matter is getting the engine and the stuff just like it came from the scat pack. You can do the body parts for the car but for me I’m not too crazy about it. If you wanna make it basic just throw in a emblem of a scat pack and you are fine. I know someone who actually has an RT and he’s gonna drop a scatpack engine and he doesn’t need to buy a new one. I have a SXT and I’m Kinda am going to do it with a scatpack engine or a hellcat engine. I think the thing that worries me is I don’t want to get like a malfunction or a brake failure. But I think if you take it to someone who knows about the engine or do a custom swap then you’re gonna be fine. I think what I hate about from people is that they think they just throw in a emblem or a vinyl on a basic car because they think they don’t have the money. The engine is what matters and great video.

I was literally just wondering if this was possible to do on my SXT so I can't wait to see the process!

Thank you for the 6.4 scatpack build, I will have a 3.6 dodge challenger sxt plus

Be careful, because a lot of the cost from the v8 vs the v6 models also incorporate stronger materials for the chassis and gears, etc. Even though effectively increased HP, other components may wear out very fast, or even fail. Some parts may not be able to safely handle the increase in strain and torque

It’s crazy I just found a 2006 Dodge Daytona charger and I’ve seen them swap the scat motor and the whole interior is also plug and play which is crazy

Im tryna do a 5.7 hemi swap on mine. I drove a R/T Chally today and I REALLY need dat fo a daily, ion care bout gas prices no mo. Im jus tryna be happy, good luck on the swap brotha!! 💪🏿💪🏿❗

You spilled the secret sauce…. I got a 19 GT love the way it looks, factory at 89k - definitely considering a swap to big kittie hearts 7k even $10k before labor instead of spending $80-90k on another Kittie? I’ll choose that any day

Built not bought. Smart brother. I'm looking forward to his build being completed.

And the insurance will be a lot cheaper just don’t let them see what’s under the hood 😅

Skip the body kit, create a sleeper. Like how that v6 beat me 😂

I'm high bid on a 21 Scat waiting to see if it's awarded to me. 6900 with fees. 62k miles. Gonna do this same thing in my wifes 2015 SE.

I'm doing the same just figured I'd sell the 3.6 engine and transmission of the 2015 charger im getting to put towards the scat pack build ❤

Yoooo I'm in the same process,,I have a challenger sxt plus, I paid it off and want to put a 392 in mine as well!!! I'm following you bruh!!

Bro I’m glad I ran into your video because I’m planning on doing the same thing for my sxt challenger. Now I know want i need to buy cause of you💪🏼

Looking into a detective police auction, 2019 Charger. Might do the conversation and get it legally dialed back!

My boy I salute you 🎉 I’m waiting to see the build i wanna do the same on my 16’ Chrysler 300 awd. I was told the same thing why wouldn’t I just buy the 392/hellcat charger but People are gonna say what they want and be negative. We’re perceptive my brother. Peace king 👑

I can't wait to see how it turns out. Dope project bro..

I’m on this same wave. My V6 was $10k fully loaded without a sun roof which is exactly what I wanted.

I woulda just got a wrecked hellcat or scat pack from the auction and transferred everything over to the V6 body it would be much cheaper and less time consuming plus you would have all the parts that you need from the donor car

Im intrigued.. im on the same vibes . Chrysler 300 for me though . 🥂

Thank you, this is what I’ve been looking for I appreciate you so much broski imma do my conversion within a month

Am about to do the same thing but can you use the v6 transmission on a v8 engine.

Bro i just swapped cluster and screen in my 2016 charger police car 💪🏾 THE CAR WAS FREE TO ME 💪🏾 waiting on a v8 setup

Love your content bro , only thing is you speak from your pov not the viewers , you can take motors out but some of us might can so we have to pay more which means it’s a good chance we might still pay more

Yooo brooo I gotta sxt n I was trying to find someone with a video jus like this thank you so much man 💪🏾💯

bro doing gods work

I have a 2016 Sxt I take really good care of I’m just working on paying it off but once it’s paid off I wanna swap it and change the bumper also

Same here bro ima be building a 6.4 scar from a 5.7 rt challenger man I’m up for it I didn’t wanna spend 1000 due to first time buyer no co singer plus insurance I’m tapping in let’s get this work

Yo im tryna engine swap my v6 how much usd $ am I going to have to spent and where can I find someone to do the whole swap?

Good video paid in full! While they in debt 💸

Can you make a list of everything you will need for the whole swap I’m using a 2014 charger I know I’ll need The wiring harness Engine transmission Body control module & Brakes

If you haven't purchased thenbrembos, i have a set, the only thing you'll need is to upgrade you knuckles for the front, not sure about the back. But i have a front set

Knowing me, i would leave it sxt badged and watch people's face after i take them to Gapplebee's 😂😂😂😂😂😂😂😂

Question for you, I have a 2016 ram 1500 with the v6. I been thinking about swapping it out with a 5.7, not looking for crazy amount of power just want to put in a hemi. So what all would I need to buy besides engine, trans? Do I have to swap my axles and fuel system like other people say?

Looking forward to it my guy

What about wire harness from Scat ? Did you need that ? Or same wire harness?

no matter what....still way cheaper than driving one off the lot. smart move.

I’m doing a similar thing albeit it’s gonna take a while but I’m wanting to swap in either the 6.4L or the 3.6P twin turbo hurricane into my 17 Ram 1500.. I’m starting by slowly building up everything else around it such as big brakes and exhaust: do you or does anyone of the SRT gauges and such will swap into a ram?

So all you need for the swap is an engine computer and transmission?

no you have to get a new harness swapping from a v6 to v8

What about the Motor Mounts & Wiring Harness, I've always heard you can't convert a V-6 to a 6.4L ... At least on the Jeep Cherokee Platform anyway.

I got 2014 sxt for my girls few months ago the car had head gasket issues now I’m think about doing 5.7 swap .. how would u go about this ?

You were playing with yourself 😂

man I hope i'm on time for the result man. can't wait. Amazing Idea bro!

Bro you’re a blessing 🫡🫡🫡🫡🫡

Hey boss would it still work the same if i put a charger engine and transmission into a challenger body or would it not fit??

Agreeed heavyyy on the facts u speaking

When you say the chargers are the same are the the small stuff the same size as an sxt like the steering wheel, the bumber, engine or does it all have to be the same year ?

Bruh turn your comments on for the Barrett Jackson videos . I wanna know if you seen lot # 1063.1 1070 drop Chevelle

I wreck my daytona im getting ready to strip it currently looking for a v6 I don't want it. To be a 6-piston because the rotors are like 1k a piece do I have to make it a 6 piston when I do the conversation?

Thank you most authentic content.

Dude it would be soooooo sleeper if you kept the outside the same😂😂🔥

Not only u a genius the insurance company think u got a v6 let that sink in

Might want to consider a rear differential and rear axles. Upgrading to Brembos will require changing the knuckles as well. Going to need exhaust from the manifold back. Possibly fuel pump.

hey u alr got a v6 2011 charger , do you think i can drop a v8 in mine? or no and if i can how would i do that?

Good stuff bro 💪

I think we have the same year are you going to add a back cam ? Or the sensors ?

You goated big bruh

One piece at a time!

Sell the 3.6 you get like 1500 back easy

I have a Daytona 5.7 getting swapped for a 2020 scatpack engine will the body be able handle that much power?

How much did the swap cost I seen a 2016 for 18k might get it and swap it

Great video man once again thank you man I’m going to be on a journey with you 🫡 it cool bc we got the same model and year so i for sure will b in tune wit you Brotha n take n advice you got 💯

What about ecu and main wire harness?

I have a 2015 grand Cherokee it’s 8spd for my srt I believe it’s the same trans luckily. Do you have to get the cluster and screen? Or it’s optional

Where are you located , would love your help ,

Smart men plus u a real men for doing your build

you have to make a lot of changes and invest more than you can imagine, from computer to harness and from exhaust to brakes. I would like to know how the final result turned out

You got a scat suspension right?

Much love for much can be said about building your dream!

Is this possible with a 3.6 Grand Cheorkee?

Is this the same platform for a challenger

Where did you buy the motor and transmission from?

Can you shoot me a list of things need for the swap. I’m literally doing the samething would be much appreciated..

I did the same thing with an rt I only paid 8k for the car

Wouldn't the insurance be cheaper because it's listed as a V6

Well I’m gonna ls swap my 2010 charger 😅😂

I just bought a 2014 Dodge Charger Pursuit (Former State Police car with a Hemi) Can this car be converted into a Scat Pack or does it have to be an SXT model ?

Possible with just SE model?

just use an automotive taser?

And so besides all of everything else, could you simply just switch over to a V8 without every scat pack addition just switch the engines? And have that reprogrammed… could someone let me know?

Save your money , be smart 💪🏾😍...

What about the differential

Also need to upgrade suspension

Hey bro can u please pm me, what all did u need for the swap? I just did it on mine and it ain't starting

If it’s a paid off v6 yeah do it but u can find scat packs 20k and up

How in the world you find the car for 10k? They no less than 25k in my surrounding area

What you do with the v6 motor I want it if you still got it

I got a RT 2018 I am about to put the scatpack motor in my 2018 RT I can't afford a scatpack but I order a Scat Pack motor 2018 with 32 k on it they want 3500 for it I already ordered it

Real Game!!!

Did he drop the update ?

How long does this process take? Lastly what’s the total price with labor and everything ?

Lets go!!!!

i have a 300s awd 2020, i want to do a 6.4 swap, can i?

I really need you to finish this and help me through my swap v6 to v8 🦾🦾🦾keep ‘em coming

Does the car still work?

you selling the motor ? i’m looking for one