No video :(

Does A Wood Splitting Drill Bit Work?

Подписаться 224 тыс.

Просмотров 16 тыс.

50% 1

Get it here... geni.us/BKEA6o
----------
LET'S TALK ABOUT LIVING BETTER:
▶ Podcast: geni.us/FtGAT4
▶ My Amazon Store: www.amazon.com/shop/petervonp...
----------
IF YOU'D LIKE TO SHOW SOME LOVE:
▶ Buy My Book: geni.us/qwbZAE
▶ Become A Channel Member: geni.us/AA3Jk
▶ Patreon: / petervonpanda
▶ Merch: petervonpanda.storenvy.com/
▶ Free Panda Group: panda-research-institute.mn.co
FOLLOW MY OTHER SOCIAL MEDIA PLATFORMS:
▶ Instagram: / petervonpanda
▶ Facebook: / petervonpanda
----------
As an Amazon Associate, I earn from qualifying purchases.
Firewood Split Drill Bit Heavy Duty Wood Splitting Screw Cone Firewood Breaker Tool for Electric Drill with 10mm/0.4in Shank
Visit the Walfront Store
Material Chrome Vanadium Steel
Finish Type Chrome
Shank Type Straight
Brand WALFRONT
Item Dimensions LxWxH 5.91 x 1.5 x 1.5 inches
About this item
HIGH QUALITY-- Firewood Drill Bit is made of high quality chrome vanadium steel, wear resistant and durable in use.
HIGH QUALITY-- Firewood Drill Bit is made of high quality chrome vanadium steel, wear resistant and durable in use.
SAVING TIME & EFFORT-- Deep thread design helps you to split large firewood easily, saving time and effort.
GOOD PERFORMANCE-- Split Drill Bit features heating treatment, high hardness, long service life.
EASY OPERATION-- Easy to use. Just install the drill bit into electric drill, and the firewood will be splitted easily.
FEATURE-- Effectively improve working efficiency of wood chopping. Shank Diameter: 10mm/0.4in, Size (Length*Dia): 150 * 38mm / 5.9 * 1.5in
Features:
Made of chrome vanadium steel, wear resistant and durable in use.
Deep thread design helps you to split large firewood easily, saving time and effort.
Heating treatment, high hardness, long service life.
Easy to use. Just install the drill bit into electric drill, and the firewood will be splitted easily.
Effectively improve working efficiency of wood chopping.
Specification:
Material: Chrome vanadium steel
Shank Diameter: 10mm/0.4in
Size (Length*Dia): 150 * 38mm / 5.9 * 1.5in
Package Weight: 558g / 19.7oz (approx.)
Package List:
1 x Firewood Drill Bit Expedition Money LLC
A Financial Wellness Program That Works
expedition.money
www.expedition.money
www.bankfinancialwellness.com
www.creditunionfinancialwellness.com
www.cufinancialwellness.com
www.smallbusinessfinancialwellness.com
www.employeefinancialwellness.net
www.financialwellnessforschools.com
www.christianfinancialwellness.com The Accidental RU-vidr: How I Make A Six-Figure Income On RU-vid: geni.us/UZ2bnyd

Опубликовано:

12 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@Fletcher2251 Месяц назад

I keep reading people saying to run it in reverse. Both the drill bit and the chuck attachment appear to be threaded in the conventional clockwise orientation. It seems like the chuck attachment would just detach itself from the main splitter bit when (IF) it grabbed the wood. If I'm wrong about the two pieces becoming detached: I don't know how sharp these bits are, but bits that are designed for clockwise drilling tend to dull faster with reverse operation while you're trying to drill into the material. That would make sense if you think about the design of the threads and the angle of the "blade" edge of the threads in relation to the direction of the pressure towards the sharp edge of the threads that reverse drilling applies. The edge of a bit is essentially a spiral blade and I can only imagine putting pressure at something around 90 degrees (I think 90, right?) against the blade edge in the wrong direction than it was designed for would be very quickly catastrophically damaging to the blade. It would be like trying to put a small pocket knife into a drill chuck and using the knife in place of a drill bit. The edge on the knife would just be destroyed in a very dirty time - wrong direction of pressure.

@Fletcher2251 Месяц назад

☆very SHORT time... I've officially gotten too old to even know how to edit my own comments.

@diyzona 9 месяцев назад

You need at least 1500W for that

@mach5k Год назад

I think you had the drill going in the wrong direction that’s why it was not grabbing and you were only drilling small little holes

@RCThis Год назад

"I'm not saying this won't work" 😂😂😂😂

@rhettoracle9679 Год назад

Wood splits along the grain, start at end going lengthwise. Stand it up vertically and go top down, which is normally how you'd split with hatchet, axe, or wedge. It is strongest across grain which is side to side. IMHO, wedge splitting maul is fastest. Cheers

@liv4gsus61 8 месяцев назад

Thank you for saving me some money!

@KindaLikeWater Год назад

You don't seem to return to your old video posts, to respond to questions.

@ayceod Год назад

I've seen other videos for these and they seem to need to be run in reverse.

@ronmckee2509 Месяц назад

The design flaw with these drill bits is they are not auger style. The threads are to close to allow for the wood scraps to be escape and so it binds. Just by an auger stype drill bit say at least 1 1/4 inch wide or more and drill numerous holes until log becomes weak and can be broken with a sledge hammer. Nontheless this is not fastest method to splitting wood.

@timbrooking Год назад

End grain!!!!

@ShowMeMo Год назад

^like he said! It's supposed to be on the end of a log. Try it that way.

@bobclevenger8684 Год назад

Run it in reverse.

@chrismv102 Год назад

Ahhh...on the end grain maybe?

@Shane-zo4mg Год назад

Use a lower gear

@johnmcdowell4273 8 месяцев назад

His drill is in reverse just like a screw when you have it in reverse, it comes out

@andyroid5028 8 месяцев назад

*Nope. His drill is moving in the clockwise direction (which is the forward gear).* If you doubt me, feel free to play the video at ¼ speed & see for yourself. Fact. *To be clear: counterclockwise is the reverse/backward direction. 👍🏼*

@gonzalez7805 Год назад

Jajajajajajaja

@Siders2032 2 месяца назад

That's not a drill... That's a screwdriver. I have the exact same one. You can only drill Styrofoam and drywall with it 😝. But I'll be fair. There seems to be several videos where this same product is failing lol