Does Sand Make Good Rock Tumbling Grit?

Подписаться 326 тыс.

Просмотров 189 тыс.

50% 1

Let's' try it and find out! I was really surprised by the results of my experiment.
Thanks to Christina Jelinek for editing the closed captions for this video.
- MERCH -
michigan-rocks.myspreadshop.com
- FACEBOOK -
/ michiganrocksrob
- INSTAGRAM -
/ michiganrocksrob
- KINGSLEY NORTH -
Kingsley North is a lapidary store in Michigan's U.P. They make a great cab machine and sell many other brands too. They have a huge selection rough rock, tumblers, grit, jewelry supplies etc. at good prices. I buy most of my coarse grit from here in 45 lb. bags. It's the best price I have found. If you buy using the following link, I make a small commission.
bit.ly/3MerxdI
This is the cabbing machine I use:
kingsleynorth.com/kingsley-no...
- THE ROCK SHED -
I buy a lot of lapidary supplies from The Rock Shed. I don't make money from your purchases there, but they have good prices and good service. This is where I buy my finer grits and polish.
rockshed.com
- AMAZON STOREFRONT -
I also have an Amazon storefront. This is where you can find other products you may have seen in my videos. As an Amazon Associate I earn from qualifying purchases. It doesn't cost you extra.
www.amazon.com/shop/michiganrocks
- SUBSCRIBE -
On Michigan Rocks you can join me on relaxing rock hunts in picturesque Michigan. I'll also show you how to polish rocks and teach you other lapidary techniques. New videos are posted every Friday and some Tuesdays. Subscribe now so you don't miss any upcoming videos!
ru-vid.com...

Наука

Опубликовано:

17 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 666

@Al-yh1kv Год назад

I also tried black blasting sand, but it broke down almost as quick as Masonary sand

@MichiganRocks Год назад

That's good to know. Thanks!

@MichiganRocks Год назад

@The Guns N' Glory Show No, I haven't. Do you know what it's made of? Could be aluminum oxide, which is also white. If it is aluminum oxide, I use it all the time.

@TheGunsAndGloryShow Год назад

@@MichiganRocks It's White Silica. I dont know about hardness but it's really sharp.

@MichiganRocks Год назад

@@TheGunsAndGloryShow That sounds like it's basically sand. Sharpness doesn't matter much if it's soft because it will break down very quickly. I'm not sure that's not better than sand, but that would be my guess.

@nutzablaze3339 6 месяцев назад

try graded, crushed silica sand from a masonry supplier, it comes in grades 1/8 diam to flower

@RyuRaeArashi 2 года назад

Surprisingly I think I'd like a lot of rocks just tumbled a while with water only, they look rough and natural but shiny and I like them more than I expected.

@MichiganRocks 2 года назад

I prefer my rocks to be really nicely rounded, but if I liked them more natural, I'd consider tumbling a batch in just water. Those got surprisingly shiny.

@tomion65 Год назад

I found the natural shapes with various imperfections and a nice overall shine very appealing.

@mariopuzo4509 Год назад

Idk how good they look wet isnt how they look Dry. U def. Want fo burnish

@MaryAnnNytowl Год назад

@@mariopuzo4509 have you tried English?

@user-hj9rt8be4f 11 месяцев назад

Q😊

@neveraskedforahandle 2 года назад

As a novice at this, your videos are incredibly informative. Thank you.

@MichiganRocks 2 года назад

You're welcome!

@R.M.MacFru 2 года назад

I was pleasantly surprised at the rocks that were just in water. I like it getting shiny without drastically changing the overall look of the rocks themselves. Thanks for showing the comparisons, Rob!

@MichiganRocks 2 года назад

Make sure you watch next week's video comparing rotary and vibratory tumblers. You'd like how rocks look from just being tumbled in a vibratory tumbler. My rocks are usually drastically reshaped in a rotary tumbler before moving them to a vibratory tumbler.

@R.M.MacFru 2 года назад

@@MichiganRocks ..Oooo! I will, thanks!

@99Rockhounding 2 года назад

I’m glad you included the just water barrel for a control. I always do a burnishing stage between different stages mostly to make sure the rocks are clean. I usually only do it for a few hours to a day though. I did notice that after doing it for a day after the 500 stage the rocks were pretty shiny. Great video as always!

@MichiganRocks 2 года назад

I burnish between stages too, but like you, I do it to give the rocks a good scrubbing to get any remaining grit out. These rocks took two weeks to really get shiny from burnishing. A week didn't have a huge effect.

@storytimewithunclebill1998 2 года назад

Wow, amazing what just water does. They came out really shiny. Was way cheaper than the sand even. Sounds like its just better to spend the money. SOme really nice rocks too. Was fun to watch. Great video

@MichiganRocks 2 года назад

The water didn't actually do the polishing, it was the rocks rubbing against each other, but that shocked me.

@cuarzorojomichoacan7050 2 года назад

@@MichiganRocks Hi if you want see my video I have nice rock Black White

@darrinwilliams5715 2 года назад

I really enjoy your approach to these different tumbling experiments. Keep it up.😎

@MichiganRocks 2 года назад

I'm doing these for other people to learn, but I keep learning things myself too. It's been really fun.

@beckyh1369 2 года назад

I discovered by accident the power of burnishing. I had run two loads of rocks and in prepping for the final polish, I discovered that the polish was almost empty and I only had enough for one canister (poor planning, but…) so I decided to do a simple clean on the unpolished rocks. I put ivory flakes and ceramic pellets in and ran it overnight. I was very shocked to discover that they were very polished the next day. It didn’t have quite the same “depth” as a real polish cycle would give, but still quite shiny enough for freeform pendants.

@MichiganRocks 2 года назад

I hope I didn't come across as bragging when I said my rocks were too shiny to burnish, but I think that's why I've never seen it work before. I have had an experience similar to yours before though. I have occasionally forgotten to add grit to a batch of rocks in the coarse stage, so they ran a week with no grit except whatever might have been left over after rinsing them. The thing is, after a week of tumbling like that, they have come out with a very slight shine. I always chalked it up to that little bit of worn out grit left in the barrel. I figured it might have been broken down enough to do a little polishing. Now I'm rethinking my theory.

@HenryLoenwind 2 месяца назад

@@MichiganRocks Indeed, this burnishing polish is not from (added or natural) grit but from rubbing two surfaces against each other without grit. Just imagine it---when two surfaces grind with particles in between, those particles want to cut grooves into the surfaces. If there are no particles, then high spots on one surface will match up with indents on the other and be sheared off.

@MichiganRocks 2 месяца назад

@@HenryLoenwind Thanks for that explanation, Henry.

@sparkybish 2 года назад

I’m surprised at the just water results. The sheen is very attractive with the less rounded rock. Super interesting video!

@MichiganRocks 2 года назад

I was just as surprised as you!

@alenaromashka8715 9 месяцев назад

I admire your williness and ability to answer every single comment or like at least. How do you manage this? Your viewers ask good questions as well.

@MichiganRocks 9 месяцев назад

I'm not sure how long I'll be able to keep it up. It takes at least an hour most days.

@andrewp.schubert2417 4 дня назад

@@MichiganRocks I sure appreciate your videos and knowledge.

@MichiganRocks 4 дня назад

@@andrewp.schubert2417 Glad to help.

@stevezozuk9622 2 года назад

That is a great lesson Rob , I like how you brought out the Mohs scale to show the differences between all the stones , and the effects it has overall. thanks Rob , see you soon. Cheers

@MichiganRocks 2 года назад

I'm glad it was helpful, Steve.

@suzettecalleja3122 2 года назад

You answer the questions we're too scared to ask but are thinking. Thinking like a true Teacher. I can tell you were a great teacher. I bet Nancy was too.

@MichiganRocks 2 года назад

This question gets asked quite a bit if you're looking at the right forums.

@IAmHumanJake 2 года назад

I agree with the burnishing, I was tumbling rocks with soap, was only supposed to do it for 1 day just to clean it for next steps, but forgot about for 5days. Next step was to go to stage 2. Rocks now looks like I just got out of pre polish

@MichiganRocks 2 года назад

I was really surprised by that and now have more respect for burnishing. I still don't think it's going to do much if your rocks are already really shiny, but for less shiny rocks, I'm sure it can have an effect. The question is, does it do much good if you only run the rocks for a day or two or do you have to go for a couple weeks?

@IAmHumanJake 2 года назад

@@MichiganRocks that's is a good question, I'm wondering how shiny it can get by just doing that.

@davidhile5363 2 года назад

That was a really interesting and well thought out experiment. I would have never dreamed that the batch tumbled in water would have lost more material than the batch tumbled in sand, and then come out shiny to boot. I’m guessing once the sand lost it’s sharpness it acted more like a lubricant or a buffering agent. I tumble in a rotary tumbler and burnish between the prepolish and the polishing stage. If I let it burnish for 24 hours the rocks often come out with a pretty decent shine. Not as good as polishing of course. Thanks for trying this !

@MichiganRocks 2 года назад

A couple other people suggested the same thing about the sand acting as a lubricant. I think that's a good theory. I burnish between pre-polish and polish too, but in a vibratory tumbler and only for about an hour. They come out of 500 really shiny in my Lot-O and I only wash them for a short time, so I've never noticed an increase in shine after burnishing.

@Rookie_Rockounding 2 года назад

Man! This was really cool. I’m amazed at the shine on the water ones. It’s a nice way to show off the prettiness of rough pieces without fully going through the whole tumbling process. Super interesting man!

@MichiganRocks 2 года назад

I'm not sure that will work with all rocks, but it sure put a polish on these. I had no idea that would happen.

@rosalindhendricks6337 2 года назад

Thorough experiment and explanation. I’m not surprised, because your teacher experience often shows through in your videos. That was interesting.

@MichiganRocks 2 года назад

Thanks, Rosalind!

@weirdhousewivesclub 10 месяцев назад

The results from plain water were really interesting! I have some pieces I've been trying to figure out if I want to polish or not because they look so interesting rough, that a water only tumble may be the right answer for a more natural finish!

@MichiganRocks 10 месяцев назад

Give it a try!

@staceysakkinen1270 2 года назад

Very interesting results. I was quite surprised to see how well just the water batch did. I guess that's good to do if you don't want your rocks to get to rounded. Thanks for taking the time to demonstrate.

@MichiganRocks 2 года назад

I was as surprised as anyone. Normally, I recommend a vibratory tumbler for someone who wants shiny rocks that are a more natural shape.

@MaryAnnNytowl Год назад

I wondered that, myself, but suspected it had to do with the quartz sand wearing away faster, and it seems I was right about something for once! 😊 Thanks for doing this one. 🙂👍🏼

@MichiganRocks Год назад

Good prediction, Mary.

@AstoundingYeti 2 года назад

Great video, looks like I need to do more tests with burnishing in my rotary tumblers. It also makes me wonder if sand could be a good abrasive for rocks less than 7 Mohs. Thanks for running this cool experiment!

@MichiganRocks 2 года назад

I'm probably going to try sand on Petoskey Stones to answer your question about softer rocks. Several people have asked about soft rocks.

@midimatt 2 года назад

Coincidentally, I was just asking myself this question a couple hours ago. I just purchased a Thumler's A-R2 this evening from a place that still has one in stock. I have never tumbled before, but I have watched plenty of your videos, and I'm excited to get started. While wondering about whether or not beach sand would work as a grit, I hypothesized that this would result in rocks that would have a roundness and sheen that you would already find on a beach with the same type of sand. Like many others, I'm surprised at the result you got with just water!

@andybaldman 2 года назад

Get a Lortone tumbler. Much better than the Thumblers.

@MichiganRocks 2 года назад

Hey, welcome to the world of tumbling! I sort of agree with Andy about that tumbler. I have one. It will tumble rocks with no problem. The motors seem to have better reviews than Lortone motors do. The problem with the small Thumler's tumblers is the lid. They wear out quickly and leak both when they wear out and also some other times. I'd suggest getting an old cookie sheet or something similar to put underneath it for when the barrels leak. It makes clean up a lot easier.

@paigelee6321 2 года назад

Love your experiments so informative, I do burnishing between grits , thank you for sharing interesting results 😊💙

@suzettecalleja3122 2 года назад

Curiosity killed the cat, but satisfaction brought it back.

@MichiganRocks 2 года назад

Good line!

@Ken_G. 2 года назад

I love a good experiment. I'm surprised the just water batch took on as much of a shine as they did.

@MichiganRocks 2 года назад

I was surprised too!

@AtomicShrimp 2 года назад

I'd be interested to see a comparison of final polishing between plain water and water plus polishing compound (i.e. start with two batches of rocks that are tumbled and ready for final polish - but just use water in one set)

@MichiganRocks 2 года назад

I understand what you're saying, but I'm not sure what the point of that would be, at least for me. I almost always use a vibratory tumbler to finish my rocks. The final polish only takes two days and uses 1/2 teaspoon of aluminum oxide polish. If you were just doing the experiment out of curiosity, I could see it, but to save on grit it doesn't make much sense. If you were doing the experiment in a rotary tumbler, you could save two or three tablespoons of polish, so it would make a little more sense to try this. I suspect it would have more effect on harder rocks, but that's just a guess.

@AtomicShrimp 2 года назад

@@MichiganRocks yeah, just curiosity really. Sort of a measure of how effective the polishing compound is, in terms of time and quality

@that.neurodivergent 2 года назад

Oh hey, never thought I'd see one of my favorite creators over here! 😀 you have such a wide range of passions though, it makes sense. Do you think you'll ever get into rock tumbling on your channel?

@AtomicShrimp 2 года назад

@@that.neurodivergent I'd love to actually - the UK (or at least the bit where I live) isn't great for source materials - it's mostly boring flint here, so I might need to buy in some rocks, or travel to get them...

@that.neurodivergent 2 года назад

@@AtomicShrimp fair enough! I know I'd be MORE than stoked to see a traveling rock-finding series on your channel but of course travel can be expensive and still possibly risky at the moment. But it is a very fun idea!! Here's wishing the best for your endeavors!

@FlyfisherStreams 2 года назад

Hey Rob, this was a great comparison between different types of grit. We have used sand in the past and it does take a lot longer to polish. Thanks again for your help on getting our rocks to shine. Its all about the first stage and cleaning in between stages. The borax trick worked very well. Oh, congrats on the Michigan win just a few seconds ago. Sweet sixteen!

@MichiganRocks 2 года назад

I'm glad you're getting some shiny rocks out of your tumbler! I know I wear Michigan shirts all the time, but that's because I graduated from Michigan. I'm not a sportball fan though. Nancy was watching the game and I was downstairs working on a rock project.

@mjoyparks 2 года назад

Very interesting. I think the biggest take away is the water only batch. Thank you for explaining burnishing. I’ve been puzzling over it this last week, so your timing was perfect!

@MichiganRocks 2 года назад

That was the biggest thing I got from this video too. I had no idea.

@01LunaMoonDragon 7 месяцев назад

I imagine, that the rocks, both in the water only and the sand, were a pretty good depiction of what would happen if the stones were left on their own in a natural setting, such as a beach where they are tumbled by the motion of sand and waves....so it isn't too surprising how nice they look. I live in FL and have nothing but sand and rocks in my yard and am hoping that when I am able to get my tumbler (C'mon Santa!) I'll be able to use what is in my yard for the first stage of polishing. Would be so much cheaper!

@MichiganRocks 7 месяцев назад

It's cheaper, but it might take thousands of years like the ones in the lake. I'm pulling for Santa to come through for you this year!

@kellyhollingsworth6100 2 года назад

Always trying new things, I think it is awesome Rob. Learn something new each video.

@MichiganRocks 2 года назад

I'm attempting to answer a lot of questions that beginning rock tumblers have.

@WagonPilotAdventures 2 года назад

You discovered free polish! I enjoy these tests. I had been thinking of using sand as a filler/cushion in my granite tumbling experiments, but now I may add a long water only final tumble to see if that helps even out the texture. Waiting for the ground to dry around here so I can restock my rock supply.

@MichiganRocks 2 года назад

I don't think that you could even out undercutting with just water. The water didn't remove much material at all and that's what you'd have to do to fix the undercutting that happens with granite. Of course, I haven't really tried this, so it's worth a shot, but that's just my guess.

@seashoremudlark3916 2 года назад

Cool video...thnx so much for all of your hard work..you are always so thorough...much appreciated. Also I really like the natural state of most of my rocks, so it's super to know about the shine from just tumbling with water. Keep rockin

@MichiganRocks 2 года назад

I have no idea what sorts of rocks that will work with, but it might be fun trying it on a few.

@lynschultz513 2 года назад

Amazing that the plain water tumbler shined the stones so much! Good experiment!

@MichiganRocks 2 года назад

I know! I was really surprised.

@user-mb4ds9gj6k 2 года назад

Thank you Rob! This is the answer to my question I've been asking for the last 3 years

@MichiganRocks 2 года назад

I'm glad you'll finally be able to sleep tonight!

@oldgamerchick 2 года назад

Using just water really shined them up. But, didn't seem to round the edges much. I did clean my rocks before the prepolishing. I wanted to make sure I got all the 220 grit out of my tumbler as well as off the rocks. I am wondering if I over filled my canister with water and that's why it's so quiet. I also put in those plastic beads. Oh well I will know in a few more days 🤗. Awesome video as usual. You always show such great ideas. The water polishing the rocks does make sense. Lots of rocks from rivers and streams are nice. You just shaved a few thousand years off the process.😂 have a great weekend. 🙃☕❤❤❤

@MichiganRocks 2 года назад

The barrel should be about 3/4 full. The water should be a little below the top of the rocks, down about 1/2 inch to an inch. For the plastic beads, I'd put in a layer of rocks and then put beads in just enough to fill in the gaps. Then add another layer of rocks, then some more beads.

@oldgamerchick 2 года назад

@@MichiganRocks I felt the bottom of my canister it doesn't seem to be bulging. So I guess I am ok for now. I think I may have too much water but, not too full. I hope I am ok. Thank you. 🙃☕❤❤❤❤

@SyntaxMSU 2 года назад

Wow I think I'll give burnishing a second chance after watching this. Great video Rob!

@MichiganRocks 2 года назад

That's how I feel. It's situations like this that remind me to keep an open mind. There's always opting new to learn.

@corteltube Год назад

Learning so much from these videos…my son is very interested in rock collecting, and I am considering purchasing a tumbler. Thanks so much. I hate going into anything blind…so your videos are so useful ☺️

@MichiganRocks Год назад

Lortone tumblers are my favorite rotary tumblers. They've been in short supply for the last couple years, and Christmas probably won't help. Check the two stores I have listed in the descriptions of my videos. They usually have some of the best prices.

@tomjones9490 2 года назад

Great video. I've always been curious about if regular sand would work as well as grit. Now I know. Thanks!

@MichiganRocks 2 года назад

I have seen this question come up on forums quite a bit. I trusted the people who told me it wouldn't work, so I wasn't surprised that it didn't. I sure was surprised about how tumbling rocks in just water shined them up though.

@kslinaz5668 2 года назад

Thank you. As always, you are very informative. I learn so much from you, you know the questions that we're wondering.

@MichiganRocks 2 года назад

I spent a long time at the Rock Tumbling Hobby forums where I saw these kinds of questions coming in all the time. I'm working on answering them.

@cardflopper3307 8 месяцев назад

very informative. I'm especially interested in that tumbling closet you made, looks great and very functional!

@MichiganRocks 8 месяцев назад

Here are a couple videos showing that tumbler closer. A friend of mine designed it and I built it. Homemade Tumbler: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6qIcK2ZohGM.html Tumbler Update: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PAMOCc2BNJM.html

@soul_adventurist Год назад

Very educational! I think we have all asked ourselves why we need special sand. Thanks for sharing ❤

@MichiganRocks Год назад

You're welcome!

@riverrat6241 2 года назад

Thanks for all you detailed information!!! After a year or so of hands on Im getting some nice outcomes!!

@MichiganRocks 2 года назад

You've got to just try some of this stuff out for yourself to get the feel for it.

@tlojewelrylove Год назад

This was very informative, thanks. 👍 I love your tumbler setup. It's very nice the way you have it enclosed in a cabinet with the sound proofing material. I was gifted a small tumbler kit with rocks and tumbling medium but have never used it for rocks because the tumbling medium can get expensive but I do use it to tumble silver and copper jewelry with steel shot. I may have to experiment with my rocks in plain water to see if I can get a good shine on them. I suppose if nothing else, they'll be cleaned when finished tumbling. LOL! Thanks for sharing this demonstration! 🙂

@MichiganRocks Год назад

If you buy your grit in larger quantities, it's not that expensive. I buy my rough grit in 45 lb. boxes from Kingsley North and it's just over $100. That will last for a long time.

@Tactility 2 года назад

Thanks for the comparison, very informative as always and appreciated.

@MichiganRocks 2 года назад

I'm glad you enjoyed it!

@11Evalone 7 месяцев назад

Thank you for experimenting and sharing! I have a similar mindset and this saves me a lot of the work.

@MichiganRocks 7 месяцев назад

I have a couple more experiments planned.

@jackmihov5231 Год назад

Outstanding instruction. Thank you for talking. Explained very well. Brilliant.

@MichiganRocks Год назад

Glad it was helpful!

@flickeringgreenflame8493 4 месяца назад

Very methodical! Also, I'm tumbler curious, but never tried it -- so your explanations were informative and clear. :) Will look through the list of your videos to see if you have a tour of your gear/set-up/process. I'm always intrigued by how individuals set up their "shop". :)

@MichiganRocks 4 месяца назад

I have several full tumbling tutorials and an old tour of my shop. Here are some links for you. The first one is the method I almost always use. Rotary tumbler followed by vibratory tumbler: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hz2E0xJYEWY.html Rotary tumbler with ceramics: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dYGFal0e1WY.html Rotary tumbler with plastic pellets: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EnNvywwztr8.html How to use a Nat Geo Tumbler: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CsTc1kXUuPo.html Tumbling beach rocks in a Nat Geo tumbler: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_Vmm24Fc7j4.html Obsidian (Apache Tears): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aW5UmiYY89g.html Shop tour: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_kgta1BLOkY.html

@cornbread9763 2 года назад

Fantastic video. Very informative. Fixing to buy a tumbler. Going to go for a double thanks to your recommendation on an earlier video. Look forward to your other ones. Thanks for the help.

@MichiganRocks 2 года назад

Have fun with that new tumbler!

@dreamlookautodetailingauto3353 2 года назад

Thats a very good experimental comparison, good to know! The difference is incredible. Love your videos. Go Blue!

@MichiganRocks 2 года назад

Lots of new tumblers ask this question. I remember thinking the same thing myself. No one would buy tumbling grit if sand worked well.

@Floydwellian 8 месяцев назад

Today I'm starting a load of agates in my rotary tumbler using tiny pea gravel. Your sand gave me the idea, so wish me luck. Since I'm out of grit (and I'm cheap) I'll do the other steps using water.

@MichiganRocks 8 месяцев назад

Good luck!

@Cliffwalkerrockhounding 2 года назад

Great info! Thanks for doing all the leg work again.

@MichiganRocks 2 года назад

No problem!

@Indyanas_ocean_view 2 года назад

Very informative, thanks for sharing ! I didn't think the ones with just water would get so shiny! 😍🥰😇👍🏻👍🏻👍🏻

@MichiganRocks 2 года назад

I didn't either!

@KCoda1248 2 года назад

Interesting experiment. Thanks.

@lo-tar1442 5 дней назад

Interesting results! We are all on the crusade for cheaper grit and media!! You said something that was smart - which is that the sand is 7 on the MOHS and so are the rocks so the sand just breaks down under the weight of the larger rock. I wonder if sand would work on something like Fluorite with a hardness of 4. Or maybe even on Petoskey stone! Thanks for doing the science!

@MichiganRocks 5 дней назад

I did try it on Petoskey Stone after this video and it did work. However, with Petoskey Stone, I would use about half a tablespoon of 80 grit in a barrel of this size and it would do more than the sand did, so I don't know if it's worth using sand. I will continue to use silicon carbide grit since I'm not using much at all.

@kimdedominicis6893 2 года назад

This was very interesting! You broke it down and explained it well! Thanks!

@MichiganRocks 2 года назад

Glad you liked it, Kim!

@dancanrv2 Год назад

GREAT video - Thanks for all your work !!

@BrianPellerin 7 месяцев назад

I’m impressed with your methods and materials, professor

@MichiganRocks 7 месяцев назад

I have another experiment started.

@nevadaminer5977 4 месяца назад

I tumble turquoise (natural and not stabilized) and the host rock will breakdown and start the initial polishing process. A run with pre polish and polish works great. I think the idea of using sand to start the process on softer stones is a great idea.

@MichiganRocks 4 месяца назад

I have since tried this on Petoskey stones, which are about a 3 on the Mohs scale. It did start to grind those. I can see sand working on turquoise too.

@deniseview4253 2 года назад

I’m amazed how shiny the water tumble rocks are.

@MichiganRocks 2 года назад

Me too!

@limaechonumismatics 2 года назад

It’s surprising what just water did. I think it looked the best out of all of these tests. Maybe you could do a test where you start with just water then go to the final grit/polish. Then have another batch where you go through the whole process with all the smaller grits and see if using just water before the final grit is worth it.

@MichiganRocks 2 года назад

I could, but I don't think I will. I have a good method for polishing rocks. I wasn't looking for a better method. I was just trying to show that sand doesn't work well for grit. The rocks getting polished in just water was interesting, but not something I'll be doing on a regular basis.

@communitypark2313 2 года назад

Thank you, Rob, for a very interesting video. The water was a huge surprise!🤔

@MichiganRocks 2 года назад

Surprised the heck out of me!

@jaylove2012 8 месяцев назад

I've used ivory soap and found that it does work for tumbling , I save the used ivory bars when they get to small to use and break them up and just toss them in my tumbler ! it puts a nice final polish on my rocks

@MichiganRocks 8 месяцев назад

Yep, that's burnishing like I did in the barrel with just water. As I discovered here, it makes more of a difference if your rocks aren't already perfectly polished. It's also just a good idea to do to clean out any slurry that might be stuck in cracks or holes.

@WhiteThrash89 2 года назад

Great video! I hope you recreate this experiment soon with softer rocks like maybe obsidian or labradorite etc... I think it's important to note that (as I'm sure you're familiar) each stone or mineral has what's called cleavage and silicon carbide is also special in that it stays fairly sharp as it always exposes a new edge when it breaks instead of rounding off and becoming smooth. I've seen charts featuring data which state that 60/90 grit will actually outperform a larger/coarser grit over a certain period of time because it maintains it's shape longer but this is all relative to the size and hardness of the materials you start with and the size/speed of your barrel and tumbler!

@MichiganRocks 2 года назад

I haven't tumbled labradorite yet (I actually just three some in the tumbler a few days ago), but since it is a type of feldspar, I suspect that it's cleavage is a big part of what makes it hard to tumble. I do realize that's what makes silicon carbide so good at grinding. You probably saw my year long tumbling video from January. It was really obvious from that experiment that silicon carbide is sharp and cuts for a long time. I have had several people ask about softer rocks, so I'll probably do this again with Petoskey stone.

@WhiteThrash89 2 года назад

@@MichiganRocks I AM familiar with the video in which you tumbled rocks for a year and it was also great! I think that tumbling silicate-dominant rocks such as quartz varieties including jasper, agate and petrified wood is so common that a lot of people simply don't have the experience or knowledge of just how rapidly you can grind softer rocks and minerals into oblivion. Especially since some of these materials can get rather pricey.

@SherryAustinMcginley 2 года назад

I was surprised by the water tumbled rocks! Very interesting video 😁

@MichiganRocks 2 года назад

I wasn't expecting that either. I make these videos to teach others, but I almost always end up learning something myself too.

@michiganprospectors 2 года назад

Great experiment! I always wanted to try this out. I had no idea that water alone would make such a difference tho. One more issue with sand is that the grains are rounded so they will not polish as well as the courser grains.

@MichiganRocks 2 года назад

I had no idea that rocks could polish themselves either until I ran this little experiment. It was a fun surprise.

@bruninomorin3586 2 года назад

Very interesting. Love your experiments !

@MichiganRocks 2 года назад

Thanks!

@lynettepavelich7540 2 года назад

Really fun science project! The water one was surprising; turned out really nice!

@MichiganRocks 2 года назад

Yeah, the water barrel was really fun.

@dyriten Год назад

Great video. Thanks for all the info

@MichiganRocks Год назад

You're welcome!

@StepDub 11 месяцев назад

Excellent experiment. I have medium size white gravel, about the same size as yours, in my backyard. Over a year or two the ones on the top get covered in moss or algae, not sure which. I am using a mini cement mixer to tumble these stones, along with water and a mix of sand and small gravel as a cleaning medium. Results have not been quite as good as I had hoped, and your tests have helped to explain why. Thanks.

@MichiganRocks 11 месяцев назад

I'm glad I could help. I never thought about cleaning driveway gravel though.

@heidiwilliams8783 11 месяцев назад

I have used diatomaceous earth as a first step and have been really pleased at how quickly it worked. I checked the stones daily as it was that fast at smoothing the rough edges.

@MichiganRocks 11 месяцев назад

That's really surprising. I just looked up the hardness of diatomaceous earth and it's only 6 on the Mohs scale. Most rocks that I tumble are 6 or harder. What kind of rocks were you tumbling in it? Were they something really soft, like Petoskey Stones?

@heidiwilliams8783 11 месяцев назад

Not Petoskey but I imagine I could for a bit. I have done some sort of fossils (with little holes or gentle waves). The main purpose is too take sharp edges down from whatever rocks I playing with at the time. I don’t shape the rocks, just take any sharp edges or if smooth, polish them. I decided giving diatomaceous earth a try due to the tiny sharp minerals. Really cheap too! Once I find the “safe place” that I put the nuts from my barrels (🙄) I’ll run some examples. It is not going to get them fabulously smooth, but the time it saves getting the process started is really impressive! Like I said, I check them daily too every other day because it can be rather aggressive. I start with 4 tablespoons, then drop to 2

@MichiganRocks 11 месяцев назад

@@heidiwilliams8783 Thanks for the additional info!

@heidiwilliams8783 11 месяцев назад

@@MichiganRocks I neglected to mention that when I run it, I have tiny pieces of rock with sharp edges, like granite. That probably has a lot to do with my results.

@kd7ign 2 года назад

I did the first stage of polychrome jasper in my HF tumbler. Opened it to cement. No water. I know I did add water or I wouldn’t have gotten cement. I think I had to many rocks. They did lose volume. What a messy cleanup.

@MichiganRocks 2 года назад

That's actually not a horrible thing. It means that your rocks really ground down a lot. It doesn't mean that you had too many rocks in the barrel. Too many rocks usually slows down the grinding action. Your problem seems to be that you didn't have enough water in the barrel. When I tumble Petoskey Stones, which are super soft, I have to put in twice as much water as I normally use to avoid having a barrel full of pudding.

@kd7ign 2 года назад

@@MichiganRocks ty!

@judyhobday4760 2 года назад

I live near the ocean and have unlimited access to the beach sand. Have wondered how that kind of sand would do. So happy you have basically answered that question.

@MichiganRocks 2 года назад

The availability of sand is what makes people ask this question, I think. That and the cost of actual tumbling grit.

@carmenevans7651 2 года назад

Gotta love a good experiment.

@MichiganRocks 2 года назад

Yep!

@skiphughes7705 2 года назад

It's interesting that you post this. I just started a batch of milky quartz with Black Diamond abrasive tested against Dan and Darcys rough grit.

@MichiganRocks 2 года назад

I didn't know what Black Diamond was, so I looked it up. It's an abrasive company, but they sell several different abrasives. Which one are you trying? I assume Dan and Darcy is something like 60/90 or 80 grit silicon carbide.

@skiphughes7705 2 года назад

@@MichiganRocks FYI. The black diamond abrasive is a total waste of time. 3 weeks and minimal wear My quartz went from 4.16 pounds to 4.11 pounds

@MichiganRocks 2 года назад

@@skiphughes7705 Thanks for the follow up comment. We an all check that off our lists!

@jbolf6 2 года назад

Interesting test comparison Rob

@natalieclark5819 2 года назад

Fantastic experiment and content.

@fourleafclover2377 Год назад

Thank you so much for a detailed video

@MichiganRocks Год назад

You’re welcome!

@YerluvinunclePete 8 месяцев назад

The plain water actually produces a beautiful result. I like it better than a finished rounded polish. It still lights up the surface and it keeps the fracture structure of the rock. Shiny oval pebbles don't have the same personality.

@MichiganRocks 8 месяцев назад

Lots of people say they like more natural looking rocks. I like them really rounded and free of any flaws. What's nice about this hobby is that you can do them however you like. We don't have to all do them the same.

@Rock-Steady585 2 года назад

Your videos are always interesting thanks

@UndergroundMetalDetecting 7 месяцев назад

We use our rock tumbler to clean the coins we find metal detecting. Funny enough I work at a sand processing facility hauling about 600,000lbs of it daily, but we use the natural aquarium gravel from Walmart in our tumbler barrels.

@MichiganRocks 7 месяцев назад

I could see sand working for cleaning coins, but I don't quite understand how aquarium gravel would work. I'm not familiar with what Walmart sells for gravel, but I'm picturing something like 1/2 inch rocks. That seems too big to clean coins. It's interesting how different people use their tumblers.

@travisguide4516 2 года назад

super interesting concept I really like your style

@MichiganRocks 2 года назад

Cool, I've never been accused of being stylish before!

@vickieowens1499 8 месяцев назад

Wow I love,love,you dude you made my day you were very through,and I can't believe how great the water looked,they look better than the ones I've been tumbling for 3wks🤣very helpful and short to the point😔❤️🙏

@MichiganRocks 8 месяцев назад

Glad to help, Vickie.

@triggersw3350 Год назад

Brilliant video.

@MichiganRocks Год назад

Thank you.

@GREEKEXPLORERS 2 года назад

Great video as always my friend!! Thank you for sharing!!

@thanrose 2 года назад

For glass and for marble, shells, or other soft rock, and for rust and paint removal from metal, I'll use backyard sand from a highly variable use residential area of the Florida peninsula. I deliberately look for more than just coral sand especially when taking the occasional sharp edges off of beach glass because I want the ocean tumbled effect. One day of tumbling max. Hasn't hurt my old Lortone. Best is definitely purchased grit for tumbling stones. In your batch #1, water and jasper, the polish was because there wasn't any quartzite to cushion each piece from each other. So each rock was polishing the others. Good test and comparison.

@MichiganRocks 2 года назад

Yes, I think that barrel with just water and rock was a true example of burnishing.

@nicolagraynewzealandrockho8976 2 года назад

Great video. Really suprising results with the water. I always burnish my stones in borax or soap powder, it really makes a difference. I only have a rotary tumbler though. The sand experiment was interesting too. A friend and I were wondering about that.

@MichiganRocks 2 года назад

I think it's fun when I answer questions before they are asked. I have a new understanding of burnishing after this.

@nicolagraynewzealandrockho8976 2 года назад

@@MichiganRocks I like burnishing, really cleans the barrels, cleans the concrete too 😊

@joehurly4687 3 месяца назад

I'd be curious to see that sand used on softer rocks. Using it on jasper, most of which is MOHS7 is sort of a push since sand is basically quartz-also MOHS7. Still a very nice demonstration, as all of your videos always are. Thank you for all you do for the hobby, Rob.

@MichiganRocks 3 месяца назад

I didn't make a video, but I did try this with Petoskey stones after reading a bunch of comments just like yours. It did grind them down, although a very small amount of silicon carbide grinds them down better. I only use 1/2 tablespoon in a small barrel or one tablespoon in a six pound barrel. I'll continue to use silicon carbide since it works so well and doesn't cost much for such a small amount.

@josephpotterf9459 2 года назад

Very sciency thanks for the testing. And the videos are great too.

@MichiganRocks 2 года назад

"Sciency" is hard to type without autocorrect messing it up.

@catherinewilliams3850 2 года назад

How interesting, I always wondered how rocktumblers worked, didn't know something was put in with the rocks.

@MichiganRocks 2 года назад

Yes, usually silicon carbide or aluminum oxide grit is used in a tumbler, depending on the stage. As you saw here, not much happens without grit in there.

@kimberlyaustin6677 2 года назад

Hey...awesome idea!

@donaldwarriner1640 Год назад

The water tumbled rocks are beautiful. They have more their character and the less brilliant sheen gives a different quality of depth. Thanks for the testing.

@MichiganRocks Год назад

I didn't expect to be surprised by the results of this experiment, but the shine I got by just tumbling in water was very surprising.

@LocnavLivoc 2 года назад

i would suggest you try an experiment with salt water. one fully saturated with salt, one only half and one just water. i'm not a chemist but i remember someone saying something to me along the lines of "a fully saturated water solution won't dissolve anything more"; so i'm thinking the slurry inside the tumbler will be different because of this, and so it will have a different effect on the rocks.

@MichiganRocks 2 года назад

Salt is only 2.5 out of 10 on the Mohs scale, so even if it wasn't dissolved, it wouldn't scratch any rocks that I tumble. Even Petoskey Stones are 3 on the Mohs scale.

@nathangroff Год назад

May I suggest a possible reason you have more granules in the sand sample is because there were granules in the sand. While the sand is somewhat uniform, there is likely still some larger granules in there that endured the ride.

@MichiganRocks Год назад

I think you’re right. I didn’t notice them in the sand, but after thinking about it more, that’s the most reasonable place for the to hav come from.

@lorrets9775 2 года назад

At least you tried and hopefully saved people a lot time

@MichiganRocks 2 года назад

That was the idea. I knew that sand wasn't going to do much, but the question comes up often enough that I thought it was worth doing a video. I didn't expect to learn anything myself, but then the rocks got shiny with no grit at all. So I got to learn something too. Bonus!

@smithdog4770 Год назад

Very cool experiment. Only using water could be a way to polish some of the smaller stones that we wouldn't normally try, they won't get completely destroyed in the process and you get a cheap shine. I think I'll do a run of a whole bunch of small stones this way and see.

@MichiganRocks Год назад

I'm not sure how well this method will work with rougher rocks. The rocks I did already had very smooth breaks. It's worth playing around with though. You make a good point about using it on very small stones.

@ABandCalledStoned 2 года назад

Thank you for this.

@obieobrien5883 2 года назад

This was really interesting!

@sonicrolfo Год назад

Thanks for the "research" ;-) I was close to give sand a try, however, you answered the question already.

@annamayfield9920 6 месяцев назад

Great video, I love the in depth detail on how to actually do this. I have two question though: Can you do a video on a suitable vibratory tumbler other than the Lot-O? And 2: where did you buy the serape jasper tumbling rough from. By the way I have a lot more question but I know you are busy. Thank you!

@MichiganRocks 6 месяцев назад

I got the serape jasper at the Rock Shed (link in the description). I'm not sure if they still carry it. I asked one company to send me their vibratory tumbler to do a review of, but they never answered my email. I called two weeks later and was told that someone would call me back, and they never did. I might try some other companies, but I have a bunch of other video ideas on my list before I do that.

@ZE308AC 10 месяцев назад

Thank you for admitting this video I really appreciate

@MichiganRocks 10 месяцев назад

Your'e welcome!

@jacobjones62 2 года назад

Thank you! I was going to attempt something like this, myself. I trust your rests more than I would trust mine, so you saved me a few weeks of tumbling. Have you tried any of the grits for used for blasting?

@MichiganRocks 2 года назад

Did you see my year long tumbling video? I used 80 grit aluminum oxide from a company that sells sandblasting grit. I'm not sure what other materials are used for sand blasting though.

@davidhile5363 2 года назад

@@MichiganRocks Glass beads are often used in sandblast cabinets in industry. They are often used to clean or deburr fragile metal parts with out removing any material from the parts, so they are not very abrasive. As glass isn’t all that hard I doubt if they would be anymore effective than sand. They are typically sold by mesh size and can be purchased any where from about .002 to .062 (1/16) inch diameter. They might be something to try for polishing Petoskey stones. Harbor Freight carry’s them but they probably have only one size. I also have some of the Black Diamond blast media that someone else has mentioned. It is very coarse, probably about 1/4 the size of the granulated softener salt. It’s appearance is similar to silicon carbide but I’m not sure what it is.

@MichiganRocks 2 года назад

@@davidhile5363 I looked that company up and found that they sell quite a few different abrasives. I agree with you about the glass beads. I can't imagine them being very effective.