Does this thing really work: Meguiar's Scratch Eraser Kit 

Thanks for your presentation, I had just bought my kit. Your really do not need a lot, just a cross made of two thin lines going edge to edge. The small amount they advise really does go a long way. My car brushed up against some bushes on a tight country road, which caused a long scratch the full length of my door. I was fantastic completely gone, cleared it up no problems. It was equally fantastic on some other light scratches. As it says, it is only for fine scratches and blemishes. So if you can feel the scratch with your fingernail, this kit will not fix that type of scratch, but that said, it definitely makes them less visible. Any deep scratch, or a scratch that you can feel with your fingernail this kit won't help. It doesn't matter what type of paint your car has, it works equally on old and newer models. The instructions say to: Place a small amount of the scratch eraser in the shape of an X on the pad. Use a medium speed setting on your drill. Make 4 or 5 passes with the pad. Remove the excess scratch eraser from the pad by pressing it in a damp towel/cloth several times. Then using only light pressure, again on medium speed making 4-6 light passes. Then buff off with the microfibre towel. I noticed that you didn't clean the pad make a second pass and you still had some good results. They do advise not to run the pad on high speed as this can generate heat which reduces its effectiveness, and using too much product is only a waste of product, it won't make it any better. If necessary repeat the instructions. You will be amazed, I was. I can recommend this. Just so that you are aware, the numbers around the drill chuck are not speed settings, they are the clutch setting to change the amount of torque applied by the motor, so you don't over tighten screws and nuts/bolts. The speed of the drill is often controlled by varying the depression of the trigger such as on my Ryobi or by a dial on the trigger such as my Black & Decker. The drill may also have a high and a low switch for additional speed control, on my Ryobi it is on the top 1 = normal, and 2 = high speed.

Just so you're aware, the setting you adjusted on your drill was the torque, at a lower number the clutch will slip - stops you from chewing up or shearing screws. Speed is the top switch (1 or 2) and of course the trigger

Nice review. Don’t didn’t know this existed. I’ve used meguires scratch remover v2 on its own and it is a great product. You get amazing results 90% of the time.

Thanks for the video! I am looking at doing this tomorrow for my truck and saw this kit in the store. Will pick it up! Thanks!

Didn’t believe these stuff worked till I saw your video. Great presentation! I wish If I could find it in my country! (Greece)..

It worked because it was just paint transfer from the object you hit and not scratches.

Excellent video thanks. I’ll try the kit definitely. I’m restoring a 1993 Ford limo.

Loved the accent, loved the car, loved the car color. Definitely a Jag fan. Mine is a 2018 XF metallic black so I'm sorta worried about putting anything on it, definitely not attached to a drill anyway. Should I be nervous or am I overthinking it? Thanks.

Nice review. I have some at home that I haven't used yet, but now that the weather is getting better I'm going to give it a try. I have a 22 year old Vette in silver that has some light scratches much like your Jag. Scratches are my fault...I was cleaning off bird poo and didn't notice them until I got it out in the sun....stupid birds !

Nice, good job man. Gonna try it on my jetta

Did it remove the deeper scratch you pointed out in the beginning?

Hi! Will this work on a windshield wiper mark/scrape? The mark isn’t deep at all - but I’d rather not spend $500+ to replace it 🙈

Yeah this nice guy

I have an off-topic decision I need your help to make. I'm short of cash and I need to replace my bootloopihg phone with a cheap replacement until I can afforr the mate 10 at the end of the month. I want another htc 10 or the g6 with a budget of £100. Which should I go for? I've had the 10 before, but not the g6.

Good video! ✌️

Will it work on white paint?

You put the sponge on the ground before cleaning and then you put the buff pad on the ground before using. Both no no's.

What kind of your drill driver?

Praise to the Allah