3 HUGE Upgrades in the xTool D1 Pro!

xTool D1 pro 10w laser, watch this before you buy

Катит лада турбо спейс Lida Света Соллар Тикток #shorts

Оживление самой дерьмовой тачки в мире 😃

Готовлю под давлением в ресторане на Патриках

КВН 2024 Высшая лига Четвертая 1/4

(DON’T DO THIS) to Your Laser The XTool D1 Pro 20w

Chads Custom Creations

Подписаться 58 тыс.

Просмотров 76 тыс.

50% 1

Видео Поделиться Скачать Добавить в

USE promo code Chad10 for 10% off for D1 Pro, F1, M1 and their bundles.
I was lucky enough to test out and show off the brand new XTool D1 Pro 20w diode laser. During my initial test I ran into some that cut my testing way shorter than I expected, though even with just a few test cuts I am blow away by what this amount of laser power is capable of.
link to laser used in this video
XTool D1 Pro 20w www.xtool.com/collections/mac...
xTool Black Friday & Cyber Monday Events (15/11-01/12 PT):
The best deals of the year! UP TO 50% OFF!
D1 Pro: www.xtool.com/products/portab...
D1 Pro Kit: www.xtool.com/products/produc...
For Customers in the EU (16/11-01/12 GMT+1)
D1 Pro: eu.xtool.com/products/xtool-d...
D1 Pro Kit: eu.xtool.com/products/xtool-d...
Amazon xTool Black Friday & Cyber Monday DEALS（18/11-04/12）
The Best Deal of this Year ! All 20% OFF!
D1: amzn.to/3TMGHJz
Official Site: amzn.to/3UZRhhO
Air Assist Kit
Air Compressor amzn.to/3PjFGr0
Air hose on off switch amzn.to/3RDXMoZ
Air Hose and fittings amzn.to/3aIWngu
Regulator amzn.to/3AWcCRT
Other Laser Videos • Laser
Consider subscribing and clicking the notification bell if you enjoy what I am uploading
My Website
www.chadscustomcreations.com
My Podcast: Working Hands Podcast
open.spotify.com/show/6A98zDX...
For anyone wanting to join the amazing team of people supporting my channel
/ chadscustomcreations
Top Supporters:
Kyle Hixson
Dr. Larry Anderson
Supporter: Woodland Iron
Stuff I use in my Shop if you purchase from this link it helps to support my shop at no extra cost to you.
www.amazon.com/shop/chadscust...
SOCIAL:
Instagram: / chadscustomcreations
Facebook: / chadscustomcreations
links provided are affiliate links when you purchase from those links it helps to support my channel at no extra cost to you. Thank you for your support.
I used to think most diode lasers were just glorified toys especially compared to my big expensive co2 lasers, but the XTool D1 changed my mind with their new diode technology giving more power then I thought possible. co2 Lasers better watch out cause this thing packs a powerful punch.

Опубликовано:

16 июл 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 140

@ChadsCustomCreations Год назад

USE promo code Chad10 for 10% off for D1 Pro, F1, M1 and their bundles. link to laser used in this video XTool D1 Pro 20w www.xtool.com/collections/machine?ref=Chadscustom& xTool Black Friday & Cyber Monday Events (15/11-01/12 PT): The best deals of the year! UP TO 50% OFF! D1 Pro: www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=Chadscustom& D1 Pro Kit: www.xtool.com/products/productivity-kit-basic?ref=Chadscustom& For Customers in the EU (16/11-01/12 GMT+1) D1 Pro: eu.xtool.com/products/xtool-d1-pro-10w-higher-accuracy-diode-diy-laser-engraving-cutting-machine?ref=Chadscustom& D1 Pro Kit: eu.xtool.com/products/xtool-d1-pro-20w-productivity-kit-advanced?ref=Chadscustom& Amazon xTool Black Friday & Cyber Monday DEALS（18/11-04/12） The Best Deal of this Year ! All 20% OFF! D1: amzn.to/3TMGHJz Official Site: amzn.to/3UZRhhO Chad's Air Assist Kit Air Compressor amzn.to/3PjFGr0 Air hose on off switch amzn.to/3RDXMoZ Air Hose and fittings amzn.to/3aIWngu Regulator amzn.to/3AWcCRT

@MarkChristopherpens Год назад

Would absolutely love to see a video on the assembly! Cheers from Nova Scotia 🇨🇦

@billieb Год назад

I am wishing now I had gone for the 20W! Good vid. love the humor!

@GeorgiaWoodsHomesteading Год назад

Very cool. We have those types of limit switches at work as well. We call them Prox Sensors. Can't wait for you to see our cutting tool in action. Keep the videos coming. I was disappointed to not see the critters in this one 😋. My vacation starts in August, I'll have to start grabbing them up during the weekends to give you and Brooke a break. Love you, Nikki

@ChadsCustomCreations Год назад

Oh yeah that it proximity sensors I can never find the right words when recording the voice over in my closet haha.

@GeorgiaWoodsHomesteading Год назад

@@ChadsCustomCreations does your closet have a lock on it too? I use mine to get two minutes of alone time 😫

@ChadsCustomCreations Год назад

@@GeorgiaWoodsHomesteading haha no, no locks on my closet... Yet

@TheSwedishMaker Год назад

Sounds like something I would probably do as well 😂 great video man!

@ChadsCustomCreations Год назад

Hahaha thanks for saying that I feel like such a dummy.

@love1nallgivespower923 Год назад

Thanks for your great work

@ChadsCustomCreations Год назад

Thank you for watching!

@stevebryson5464 Год назад

Yes, please do an assembly video

@christinebagatin5945 Год назад

Yes pls! On the correct assembly. Also, well explained! Tnx

@ChadsCustomCreations 3 месяца назад

Thank you for watching!

@marklengal9990 Год назад

Yes. PVC is very toxic when burned and needs to be removed. I’m sure the meant it will cut some me plastics but they should include at least a warning ⚠️

@ChadsCustomCreations Год назад

Thank you for your input xtool is good about fixing mistakes like this so my bet is it gets changed before hitting the main market.

@maluskakrecik Год назад

@@ChadsCustomCreations quantity also makes the danger. Cutting a thin pvc sheet is one thing, cutting a piece of thick pvc is something else

@dwwoodbuilds Год назад

The D1 pro looks awesome. I just got the D1 a couple of months ago, so I'm jealous! ;) Interesting results for the higher air pressure for the air assist, I guess thinking about it, it makes sense since it could force air into the deeper cut and clear out smoke and debris. As to your decision to downgrade to a previous firmware version... I don't think i really need to say much, looks like you learned the correct lesson. I'm sure Keith will give provide plenty of constructive feedback on the next podcast episode... That being said, please keep making laser product review and usage videos!

@ChadsCustomCreations Год назад

Thank you David yeah, I am sure I'll never hear the end of that decision lol 😂

@quetzalcoatlhermeticus8024 Год назад

@@ChadsCustomCreationshey man, how much psi you set for let's say 3mm plywood or 80 lb paper?

@ChadsCustomCreations Год назад

@@quetzalcoatlhermeticus8024 I normally just keep the PSI maxed out while cutting but if it is causing issues you can definitely bring her down. I do very low psi when engraving.

@ulrichlegros Год назад

Hi, at 3:00 you have set your 20W laser on 3mm, try to put it on 6mm for your test 7mm wood.

@michaelmathiesen2710 Год назад

Would love to see assembly video please.

@stevebrillaud4781 Год назад

Chad I see you were having problems with light burn using a Mac computer! Me too ,have you gotten the Mac to connect to the D1 pro ? If so how .?

@ChadsCustomCreations Год назад

Mine was actually a windows computer but it was my fault for messing up the firmware on the machine. Though xtool did show me how to fix it I added their solution to my latest video on the description.

@marklengal9990 Год назад

I had no idea I could use my own air compressor. That’s a game changer.

@ChadsCustomCreations Год назад

Yeah I was pretty surprised to see the difference when I went from low PSI to high PSI

@marksneyd1262 Год назад

@@ChadsCustomCreations is xtool air pump limited to 34psi?

@ChadsCustomCreations Год назад

I don't know the actual psi coming out of the xtool air pump if I was to guess I am thinking it would be around 5psi

@patrickkemp8047 Год назад

Would like an assembly video

@rzimme1 Год назад

Please post how you fixed it, I bricked my xTool D1 last night doing the same thing. The firmware update process for xTool is confusing at best.

@ChadsCustomCreations Год назад

Hey Bob this method right here should get you back up and running. I've been meaning to put out an updated video but currently I am stuck with a huge local order keeping me from picking up the camera. support.xtool.com/hc/en-us/articles/7488237385751

@s-yvonne5182 Год назад

I heard that sculpfun will also produce 20w machine, are you planning to make a comparison video?

@ChadsCustomCreations Год назад

At the moment I have only heard from them in testing out their 10w laser.

@s-yvonne5182 Год назад

@@ChadsCustomCreations I heard the 20w laser head will be released this month.

@Degan092786 Год назад

Assembly video yes please

@jeffrichied4521 Год назад

I teach HS and am seriously considering getting this for my class. I’d love to see assembly video. Thx! Do you know if software can be downloaded/run by Chromebook?

@ChadsCustomCreations Год назад

I am sorry to say that at this moment lightburn can only be run on windows or Mac, though you could have the students do their design work on the Chromebooks and transfer to a Google drive and have a dedicated device at the laser where they could import their projects.

@jeffrichied4521 Год назад

@@ChadsCustomCreations Thx for the quick reply. I was thinking of doing something similar for the 3D printer this year, so I’ll probably just set up another old PC for the laser printer as well.

@ChadsCustomCreations Год назад

@@jeffrichied4521 that's the way to do it!

@astedino Год назад

Hi, are you using the lightburn or the program that follows with xtool?

@ChadsCustomCreations Год назад

The test that I ran I used their new software called creative space it's actually looking pretty good similar to lightburn. But this machine also works with lightburn which I do prefer.

@lorenaenns3215 Год назад

I would like an assembly video

@jeffrichied4521 Год назад

Another question or two: - a fellow teacher said he uses xtool M1 in his class, but it’s a good chunk more $ and the biggest difference I can see is the enclosure. Are u aware of any differences that might be worth the $? - any safety considerations I should prep for before I turn my class loose? (Venting, goggles, enclosure, etc.) Thx much!

@ChadsCustomCreations Год назад

So the M1 is enclosed and also has a vinyl cutter but I've never been a fan of the all in one machines as they to me seem to do the jobs less well than a dedicated machine. I am about to get the enclosure kit for the D1 and make a video on how to setup a laser indoors. But yes for the classroom enclosure is a good idea as you won't have to have glasses on everyone in the classroom. Venting will be big for you have access to a window? If not there are units that filter out all the smoke and can be left indoors but I haven't personally used those yet.

@jeffrichied4521 Год назад

@@ChadsCustomCreations thx much! The windows in the class don’t open but I do have a vent hood used for Chemistry labs that I could place the exhaust hose in. More research to do but I’m leaning towards the D1. Thx again!!

@BitSmythe 10 месяцев назад

3:20. “What appears to be” I suspect you’re looking to the left of the air assist nozzle. That’s the crosshair projector. The flame sensor is at the bottom, next to the red and black wires. It looks like dark LED.

@ChadsCustomCreations 10 месяцев назад

Yes you are correct I definitely got mixed up there.

@mtnmage Год назад

Compressor Question: I like the idea of the HPA, but am struggling to find a compressor. The one you are showing may be workable, but one thing you are not mentioning is how long are you running it at 40psi? Is that the maximum continuous output of the machine? Is the motor cycling, or, running the entire time? How long can the motor manage that? When I am completely up to speed, I'll be doing 380x800mm ish pieces with deep (1.5mm) engraving, which could take quite a while, even if I used the 40w, so, I am trying to find a machine that won't leave me with a pile of compressor motors in my yard.

@ChadsCustomCreations Год назад

Yes it can handle 40psi constantly I’ve run mine for hours and hours and haven’t run into problems yet. Probably 18 hours straight some days.

@mtnmage Год назад

@@ChadsCustomCreations Does it run constantly or cycle?

@ChadsCustomCreations Год назад

@@mtnmage I think runs constantly when running 40psi cause it is trying to get back to 120psi.

@Chris-uc7kh Год назад

If I’m going to do the air assist upgrade you mentioned with the air compressor in your description, do I have to buy the air assist through them for any reason or can I skip that and put that money toward the upgraded compressor? What I’m saying is I f I don’t buy the air assist through Xtool, will there still be a connection for me to hook up my upgraded air compressor to?

@ChadsCustomCreations Год назад

Yes no need to purchase the air assist with xtool if you want to reach the higher psi like I showed.

@Chris-uc7kh Год назад

@@ChadsCustomCreations You’re my hero! Thanks for such a quick response. Ordering with your code now, hope it helps a bit! Love the videos! Keep up the good work!

@user-my2lu3bf5m Год назад

i will be getting for my budget 10w

@ChadsCustomCreations 3 месяца назад

That’s a great place to start.

@victitova3811 Год назад

I am very new to lasers, but I need something to cut 3m self-adhesive sheets to custom shapes. I am using some vinyl cutter for this, but I am very unhappy about its accuracy. How many hours per day can this machine work, in your opinion, and how long would it last in general? 🙏🙏🙏🙏

@ChadsCustomCreations 5 дней назад

I’ve run mine straight for over 8 hours I don’t see why it couldn’t go longer either.

@BlueScreenOfDead Год назад

silly question.... WHY is adding air assist helping the make things better ? Specialy at those high pressures ?

@ChadsCustomCreations Год назад

I don't know the exact science behind it but besides keeping your lens clean to work at optional power I would guess air is also removing the particles that are being burned clearing the way for the laser to continue to pass through thicker layers without being blocked. I also think that there is some kind of adding fuel to the fire thing going on if you imagine blowing on a campfire it intensifies the heat and I believe the laser is having something similar happing here. I am Interested to hear what others think aswell.

@BlueScreenOfDead Год назад

@@ChadsCustomCreations i think you are right, dont own a laser yet, but i am learning and getting enough information to make a choice, incl all its tools.

@BitSmythe 10 месяцев назад

10:18 That’s simply an IR LED and detector. Interrupting the light triggers the sensor. Simple. Just like auto-flush toilets, or the automatic sinks that never work right.

@ChadsCustomCreations 3 месяца назад

You’re right

@iruleyou05 Год назад

Coming after a fiber laser is a stretch. It might scratch the surface of doing a quick 5 second marking pass on a fiber, but this isnt the power to keep up with removing metal in the same way.

@ChadsCustomCreations Год назад

Stay tuned my friend

@mikeferretti7422 Год назад

Does the pro also have the option for the longer rails?

@ChadsCustomCreations Год назад

Yes I believe it does.

@bunnybabybevytv6434 Год назад

Good video

@ChadsCustomCreations Год назад

Thank you!

@billieb Год назад

I need help. I have a ryobi air compressor that will hold a set pressure. It has an air hose attachement fitting. I cannot figure out how you added the gauge thingy. Is there anothe vid on the set up I can watch?

@ChadsCustomCreations Год назад

Did you purchase the fittings kit in my Amazon links?

@billieb Год назад

@@ChadsCustomCreations I bit the bullet and just did it. I took the air our fitting out and put in one of the blue ones. But -- the shut off valve you show at the xtool end is not in the kit. Do you have a part # for it? 9:54 in the video?

@billieb Год назад

never mind. I overlooked it in the list!

@brightsides6581 Год назад

Hi can we fit xtool d1 laser head on any other lasers rail like if I have sculpfun Or outur?

@ChadsCustomCreations Год назад

I bet if you were good with electronics and 3d printing some adapters I bet it could be done.

@texmextrol Год назад

Thought you were going to make an x with the band-aids haha

@ChadsCustomCreations Год назад

Crap missed opportunity

@lukedumoulin6049 Год назад

Also it drives me insane when you use metric and standard in the same measurement lol 1mm/sec for a 3/4 inch hole lol love to calculate that one

@ChadsCustomCreations Год назад

Hahaha 🤣 sorry I've started using lasers for speed in terms of metric and all measurements in the design are all imperial blame Lightburn for letting me set it that way.

@lukedumoulin6049 Год назад

@@ChadsCustomCreations lol yeah I just was curious for cut time at 1mm/s is pretty easy math aside from conversations

@bulentakyildiz3424 Год назад

Hi. Can i use atomstack laser air assist to xtool d1 pro? Thankyou😊🙏🙏

@ChadsCustomCreations Год назад

Probably as long as the air tube that goes into the xtool is a 7mm or 1/4” I believe. Or you could always get an adapter too.

@joythomas100 Год назад

"Fixing" Lightburn? Must be joking,right?!!! BEST Ever Laser Software!!!

@ChadsCustomCreations Год назад

Definitely not an issue coming from LightBurn I think it was just having an incompatibility with the x-y coordinates I am sure it was my fault as now I am seeing they have a device important file for adding to LB I am sure I screwed up something in the Manuel setup I did. Sure wish I could go back and not do what I did. Lesson learned for sure.

@chuckstrunk3746 Год назад

Would and air compressor for an air brush system work for the air assist?

@ChadsCustomCreations Год назад

I would definitely think so. The PSI probably won't be super heigh but I bet it would be similar to the Xtool stock air assist

@chuckstrunk3746 Год назад

@@ChadsCustomCreations Thank you!!

@user-my2lu3bf5m Год назад

is it possible to use a drawing my great granddaughter created to have it cut out her dog sketches. can you add your own creations in computer from a drawing she is amazing artist at 13 offered 100$ to paint sketch people’s dogs

@ChadsCustomCreations 3 месяца назад

Definitely you can just take a picture with your phone and import that into the software.

@Humbledandelion Год назад

Is there are plant based alternative to acrylics on the website?...acrylics pollute..

@ChadsCustomCreations Год назад

As far as I am aware I don't think so. PLA on 3D printing is somehow plant based I wonder what a laser would do with that. Clear is probably not an option but opaque colors would be available I am sure.

@Humbledandelion Год назад

@@ChadsCustomCreations I own a 3d printer I wanted to engrave on some keychains I did but I dont know how the laser will work on plant based resin.

@ChadsCustomCreations Год назад

@@Humbledandelion I definitely have that in my list of materials to test and share the results on.

@TheGrantAlexander Год назад

Very interesting, if they send me a laser I'll use it🤣

@ChadsCustomCreations Год назад

They probably won't trust me anymore after this 🤣

@TheGrantAlexander Год назад

@@ChadsCustomCreations well they can trust me😁😁

@ChadsCustomCreations Год назад

@@TheGrantAlexander @xtool get this guy a laser!

@peterwetton2655 Год назад

Do not cut pvc on any laser cutter, it corrodes your parts and is toxic, get a vinyl cutter if you want to cut it.

@BitSmythe 10 месяцев назад

10:25m My D1 Pro has limit switches on just two sides, for X and Y travel. Not “all sides.”

@ChadsCustomCreations 3 месяца назад

I may have gotten it wrong

@jamesfoskey8703 Год назад

What is the fix to that problem?

@ChadsCustomCreations Год назад

I believe just re-uploading the original firmware is all it needs. Stay tuned "I'll be back"

@mathewpundt2075 Год назад

Assembly video

@grumpywoodchucker Год назад

"Instructional Video", "Instructional Video", "Instructional Video", "Instructional Video", *internet chanting

@joythomas100 Год назад

Mistakes Cost! Now you know it as well!

@ChadsCustomCreations Год назад

Yes it definitely hurts I am hoping it will be a simple file to reload and maybe I'll be back up and running. Fingers crossed.

@user-my2lu3bf5m Год назад

yes interested i’m in process of buying want all the help at 79 i need visual and auto help thank you.

@ChadsCustomCreations 3 месяца назад

Glad to hear you are doing it I will try to help as much as possible.

@anonymous-wx5xu Год назад

Can I just buy one of your laser engraver?

@ChadsCustomCreations Год назад

😅

@anonymous-wx5xu Год назад

Can I? Brand new is too expensive

@ChadsCustomCreations Год назад

@@anonymous-wx5xu have you looked at the pricing on the 5w option wouldn't be a bad place to start. My first laser was a 2.5w 😊

@anonymous-wx5xu Год назад

I did, but I just want to buy from you because I can feel you well sell me good secondhand laser engraving machine for cheap price, it's a win for me I guess 😅

@anonymous-wx5xu Год назад

I did, but I just want to buy from you because I can feel you well sell me good secondhand laser engraving machine for cheap price, it's a win for me I guess 😅.

@MegaSchoolman Год назад

3:20 That looks like it's the crosshair/aiming laser

@ChadsCustomCreations Год назад

You are absolutely right 🤦‍♂️I did find the flame sensor and that's definitely not it. I should have known as the normal D1 has the red dot pointer in the same place.

@addohm Год назад

PVC can be cut (melted) in well ventilated areas.

@ChadsCustomCreations 3 месяца назад

Interesting but is it worth the risk?

@BitSmythe 10 месяцев назад

2:15 What’s “film?”

@ChadsCustomCreations 10 месяцев назад

“Film” in English means to have recorded with a video camera.

@BitSmythe 10 месяцев назад

@@ChadsCustomCreations Oh, you mean “videoed” or “recorded.” Film is a thin layer or coating.

@love1nallgivespower923 Год назад

Please make instructional video please

@ChadsCustomCreations 3 месяца назад

You got it

@Hatchmade Год назад

Wow. Call Me impressed. 3/4 inch plywood

@ChadsCustomCreations Год назад

You and me both wait til I get this thing fixed I am going deeper 😂

@harldave9850 Год назад

PVC Is dangerous. And they could be opening themselves to lawsuits!!

@ChadsCustomCreations Год назад

As far as I know thankfully this was removed from all of the production models before shipping to the masses.

@mrsdizi1234 Месяц назад

I have a love hate with this 20w kinda a waste looking for something new, no customer support for all the things that go wrong with it...

@ChadsCustomCreations Месяц назад

What’s going on with yours? I hear the best way to get support is through the official Xtool FB group.

@__--JY-Moe--__ Год назад

One out of four hundred million! what happened to the American maker's market?? did ya'll miss the sign that reads: please be a 🐒🙈🏖

@ChadsCustomCreations Год назад

🙈🙉🙊

@torowazup1 Год назад

👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼🍎😂😎

@ChadsCustomCreations Месяц назад

👍

Далее

3 HUGE Upgrades in the xTool D1 Pro!

18:00

3 HUGE Upgrades in the xTool D1 Pro!

Просмотров 68 тыс.

xTool D1 pro 10w laser, watch this before you buy

23:04

xTool D1 pro 10w laser, watch this before you buy

Просмотров 37 тыс.

Катит лада турбо спейс Lida Света Соллар Тикток #shorts

00:12

Катит лада турбо спейс Lida Света Соллар Тикток #shorts

Просмотров 145 тыс.

Оживление самой дерьмовой тачки в мире 😃

1:09:02

Оживление самой дерьмовой тачки в мире 😃

Просмотров 3,1 млн

Готовлю под давлением в ресторане на Патриках

00:46

Готовлю под давлением в ресторане на Патриках

Просмотров 449 тыс.

КВН 2024 Высшая лига Четвертая 1/4

1:52:57

КВН 2024 Высшая лига Четвертая 1/4

Просмотров 61 тыс.

Cutting Metal with a Desktop Laser

18:38

Cutting Metal with a Desktop Laser

Просмотров 437 тыс.

xTool 10W vs 20W D1 Pro Diode Laser Engraver | Easily Upgrade Laser Modules

11:23

xTool 10W vs 20W D1 Pro Diode Laser Engraver | Easily Upgrade Laser Modules

Просмотров 4,3 тыс.

I didn't expect this... / My xTool D1 Pro 20w experience

11:24

I didn't expect this... / My xTool D1 Pro 20w experience

Просмотров 52 тыс.

xTool D1- Best Engraving Glass Method

17:14

xTool D1- Best Engraving Glass Method

Просмотров 87 тыс.

The Ultimate Desktop Laser Cutter Engraver The XTool D1

16:21

The Ultimate Desktop Laser Cutter Engraver The XTool D1

Просмотров 766 тыс.

xTool D1 Pro 20w Projects

11:45

xTool D1 Pro 20w Projects

Просмотров 23 тыс.

XTOOL D1 Pro Wire and Hose Management Installation

15:34

XTOOL D1 Pro Wire and Hose Management Installation

Просмотров 2,6 тыс.

25 Products That Let Me Quit My Full-Time Job

8:29

25 Products That Let Me Quit My Full-Time Job

Просмотров 1 млн

Review of xTool D1 PRO - INCREDIBLE PRECISION!! and POWER 20W

10:34

Review of xTool D1 PRO - INCREDIBLE PRECISION!! and POWER 20W

Просмотров 20 тыс.

I Made $937 In 48 Hours Using My XTool D1 Pro

7:38

I Made $937 In 48 Hours Using My XTool D1 Pro

Просмотров 38 тыс.

Как объяснить маме, куда тыкать на iPhone?

0:18

Как объяснить маме, куда тыкать на iPhone?

Просмотров 935 тыс.

Mac Studio из Китая 😈

0:34

Mac Studio из Китая 😈

Просмотров 145 тыс.

Новый Игровой Изогнутый Монитор Монитор MSI MAG 341CQP QD OLED

23:10

Новый Игровой Изогнутый Монитор Монитор MSI MAG 341CQP QD OLED

Просмотров 35 тыс.

Купил дешёвую видеокарту GTX 1060

16:35

Купил дешёвую видеокарту GTX 1060

Просмотров 26 тыс.

ИГРОВОЙ ПК ЗА 10К КОТОРЫЙ ДЕЙСТВИТЕЛЬНО ТАЩИТ В 2024 ГОДУ / СБОРКА ПК ЗА 10000 РУБЛЕЙ by KOMPUKTER

12:15

ИГРОВОЙ ПК ЗА 10К КОТОРЫЙ ДЕЙСТВИТЕЛЬНО ТАЩИТ В 2024 ГОДУ / СБОРКА ПК ЗА 10000 РУБЛЕЙ by KOMPUKTER

Просмотров 124 тыс.

Лучше купить PSP || Anbernic RG405m и Retroid Pocket 2

14:45

Лучше купить PSP || Anbernic RG405m и Retroid Pocket 2

Просмотров 47 тыс.

Intel - это ФИАСКО! Новые CPU обжигают руки! 🔥🤬

13:51

Intel - это ФИАСКО! Новые CPU обжигают руки! 🔥🤬

Просмотров 75 тыс.