DON'T START A BOAT PROJECT 

And not one of them finished spoilt kid with too much money

​@@ajw1467you'd be surprised how "cheap" used boats can be....... Till they get "fixed up"......

@@dennisfarris4729 being a boat builder by trade for 50 ish years there isnt a cheap boat

@@dennisfarris4729 being a boat builder for ni on 50 years there isnt a cheap boat at all

@@dennisfarris4729 being a boat builder as trade there is never a cheap boat

I noticed the same thing and wanted to comment. I wish MY welding was that good.

looks like better power output for sure.

Co2 detector

🤣🤣🤣

Powder exintshers = garanited powder cleaning if used, if not cleaned up -Bye bye electronic stuff. And causee corrosion on metal ( but not dangerous for the environment). A serous Co2 extinguishing as first solution (in electrical installations computer rooms powder is a no go) ,if this is not enough use powder- messy as hell , on fibrous material water work very well and is a" clean" method. . Or a foam extinguisher -will have to be cleaned up after (will not corrode metals doe) . There are oil resistant foam and non oil resistant foam. The oil resistant foam is very much less environmentally friendly, so on fibrous materials use the non resistant type. The fire fighters don't want to use foam if the other alternative- water is enough. Prior habits of using foam on house fires has been found to seriously pollute wells and ground water .

Some form of forced ventilation would also be advisable.

Or they can make a cover plate (like a c section) from side to side of the roof sitting in the groves on both sides of the section that is cut open where the pipe is . basically narrow roof over the roof where the pipe is in this plate. a water tight flange is installed in the and plate and the pipe treaed through it , as you do above and below ta pipe shimny on house . Because it's in a roof joint I think this will be the best method cutting in the joints like that messes up the water profnes ,its hard to seal when there is two plates meeting with hole in the intersection.

Agreed. Lets say he does things in an different way. That can be refreshing in the overall very conservative boating community and related videos. No need for another Tally Ho channel. This channel is more of a sort of entertainment i guess..but the guy does earn some respect for the endless perseverance.