No video :(

Don't Waste Your Money on Factory Heated Grips! | Tusk Lock On Grip Install & Test

Подписаться 34 тыс.

Просмотров 9 тыс.

50% 1

CONTENT WARNING: All SWANKY CAT videos are intended for entertainment purposes ONLY. Any attempt to recreate, reenact, or otherwise copy ANYTHING in SWANKY CAT videos is done at the viewers own risk!
PAID PROMOTION NOTICE: The SWANKY CAT channel regularly accepts, uses, tests, & reviews promotional products in our content.
Installing and testing Tusk ATV lock on heated grips on my 2020 Polaris Sportsman XP 1000 S
Buy Me A Beer: paypal.me/SwankyCatBeerMoney
Links to my gear & parts!
(If you click these and make a purchase on the sites I earn a small commission, which goes towards more videos like this!)
Grips: www.rockymount...
Thumb Heater: www.rockymount...
Handguards: www.rockymount...
Handguard Mounts: www.rockymount...
Mirrors: www.rockymount...
Allen T-Handles: www.rockymount...
Motovlog Stuff
Helmet Camera: amzn.to/36BHqdM
Mic (requires adapter or media mod): amzn.to/3qEW4Ia
Hero9 Media Mod: amzn.to/3JLLF4O
Power Bank for GoPro: amzn.to/3iCxanZ
Power Cable: amzn.to/36rxlQT
Helmet Camera Mount: www.amazon.com...
360 Camera: www.amazon.com...
Insta360 Selfie Stick: www.amazon.com...
Clamps For Holding Selfie Sticks: www.amazon.com...
Helmet: www.rockymount...
Goggles: www.rockymount...
Stay Swanky My Friends!

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@IslandADV 2 года назад

Nice setup. I love how the bike has ignition switch supply connections like that. Makes it so much easier to add stuff like this.

@SwankyCatProductions 2 года назад

Right??? I wish everything had that. I had to tap into my signal light running lights on my TW haha.

@topJimmyP1984 Год назад

Nice video. I just installed mine last week, they heat up really good after a few minutes but one thing I didn't like was the extra length like you stated. I tried to move my other controls inward so they would go on most of the way but there is a little bit of a gap between the locking ring and the grip itself and the innermost edge which could have been reduced by the manufacturer.

@brandondavey3044 2 года назад

They look great! I went with the Kolpin heated grips. I paid $100CAD. I had the opposite problems you've had, my grips were almost an inch shorter than my factory grips and the thumb heater got VERY hot. So much so, I had to remove it and install a small piece of exhaust heat wrap and new shrink tubing and even still, it's plenty warm. My grips have already stopped working and wires pulled out from the one side. So I'll definitely be picking up one of these! I ride a 2021 Honda Foreman Rubicon Deluxe. Thanks for the great content

@SwankyCatProductions 2 года назад

Mmm that stinks! Glad this helped though! Thanks!

@dripdropfamily Год назад

I tell you what plowing in 0° suck. I now remember what it was like in grade school when you come back inside after recess and your hands burn. I'm going to buy them ASAP.

@ChickenParm152 2 года назад

I bought the tusk $20 heated grip kit to add to my TW200 and added my own relay and a nicer switch to do it properly and man let me tell you, best upgrade on the bike lol. The KLR650 will be getting the same kit as my TW soon!

@SwankyCatProductions 2 года назад

Just put them in mine the other day! Can't believe I went so long without them!

@bdeck4368 9 месяцев назад

Heat Demon all day, had them on multiple ATV’s and last forever

@stevew5212 2 года назад

Heated hand grips. Your getting spoiled but that is ok. They make riding a lot more comfortable. You might think about a windshield for riding in cold temps. My can am thumb heater usually has to be on longer time and on a higher heat vs the handgrips.

@SwankyCatProductions 2 года назад

Haha true. I've thought about the windshield but I'm not sure I can handle the look of it.

@stevew5212 2 года назад

@@SwankyCatProductions you will adapt.. its only on during cold temps as long as you get one that is easily put on or taken off. Dont get one that is permentaly attached.

@tippytailmckitty2658 2 года назад

You had a baby, you're hair started turning gray. Welcome to the club!

@SwankyCatProductions 2 года назад

Haha thanks!

@Stewbaru Год назад

Just got these, they work fine until i turn my lights on. Once my light are on they shut off and wont turn back in unless im on the throttle. Bikes always over 12v. Anyone come up with this issue? This is on a 2021 can am renegade

@ryanboening 9 месяцев назад

Your stator produces more power when you’re revving the bike. It doesn’t output enough to supply both with sufficient power. You can get your stator rewrapped to produce more power

@pb4uride 7 месяцев назад

The title should be - Don't Waste Your Money on Tusk Lock On Grips. The controller doesn’t last and then the grips are useless. I’ve got them on my ATV. Have managed to repair broken wires on the controller a couple times but now it’s done. No replacement available so have to start again. Won’t be Tusk brand.

@beco89inc50 Месяц назад

Does this kit only come with the wiring you need to wire directly into your wiring harness or does it come with the harness that you can wire directly to your battery?

@SwankyCatProductions Месяц назад

They intend you to connect the red wire to a hot line on the bike, but you could also connect it direct to the battery. You'd just need to clamp the right size terminal on the end of the wire to connect it.

@thedoeweb 2 года назад

I liked your placement of your GPS and was curious on your X2 if you were recording in 360? I have the X2 as well and have made a couple of videos with it in my RZR but find that a there is more of a learning curve using Adobe Premiere. Not very fond of their software when it comes to cutting out sections of your video.

@SwankyCatProductions 2 года назад

Thanks! Yep, it's 360 and then I just use the Insta software to aim and lock the footage. Then I process that into a normal video and edit it alongside my helmet cam footage.