Tutorial on how to replace the exterior door handle on 2007 2008 2009 2010 2011 2012 2013 2014 Chevrolet Tahoe Suburban Yukon Escalade Silverado Sierra
Used this video to change my driver side door, had to watch another video to figure out the key, then came back to this video to finish it up. That clip was the only thing I couldn’t figure out, you made it look easy! Which it was, I just needed needle-nose pliers to pinch and pull it out. I wouldn’t have even attempted it without your clear and straightforward instructions. Thank you!
Thank you so much for this great video! I was able to replace my driver’s side handle with no problems after the door iced shut and I accidentally ripped it off. Very easy with your straight forward video tutorial.
Just changed the driver side handle on my 2013 Chevy Tahoe. I paid $18 for the handle on Amazon. Body shop quoted me $154. Took about an hour. I couldn’t have done it without your video so thank you so very much. Jeff in North Carolina
Thank you for the instructional video. I wouldn't of been able to replace without you. I bought all 4 handles on Amazon for 46.00. Replaced 2 out of four that were broken.
Ive been watching many videos for handle replacement. Your video is top notch. My passenger, outside door handle opens all the way out. The bolted part is secure however the pull handle comes all the way out. Like its not attached to anything.. Ive ordered a new handle and will replace it when it arrives. I will watch your video again. Thanks.
OMG thank you so much for clearly and concisely making this video. The door handle on my 07' tahoe came off in our hands and we paid $18 for the part on amazon and FREE on labor for DIYing it up ourselves! We watched and rewinded it a few times, so thank you a million times for making this video❤
nice easy simple directions wish more sites could be so clear and easy, nice sound no over Bering back ground noise, speaks clearly, very understandable, lighting clear doesn't fade from dark to light and vice versa, nice job dude, take heed other sites practice how he produced this video
This video is great - really helped me with the plastic clip inside the door - I might have broken the clip if I had not watched this. After replacing the handle - now I am realizing the handle was only one part of the problem.
Excellent video. I have seen another videos and you did a great job explaining all the little details which are very important and you approach the camera close so we can understand. Ican tell that you have experience doing this👏👏👏👏👏👏👏👏
@Scott Easton Ugh all that... DAMMIT man... Welp, looks like I have my work cut out for me smh. At least I already have MOST of the required tools this time (which NEVER happens lol). Might as well get another panel while I'm at it (the color I actually want). Thx for posting!
I did this on my 07' Cadillac escalade passenger side and everything was put back correctly but whenever I go to lock it with the key fob, the door does not open. neither the inside nor outside door handle will open the door. I keep having to unlock it manually with a rod through the window panel. Any ideas on why this is happening?
I'm having trouble popping off the door panel, is there a trick to how you are pulling/bracing the door? I've gotten everything else off exactly as you've shown. It's nice to be doing this with my daughter and showing her that we can do this.
Once you have all of the bolts out you need to pry the bottom of the panel away from the door, the clips have to be pulled out before the panel can be lifted off.
Having hard time tracking down replacement bolts only. Saying only come with full new panel. Possibly know where boltS can be obtained or equivalent? Excellent video/direction!! Thank You!!
Awesome video. 2010 Escalade front passenger door handle popped right off from the outside. Door opened 3 times from inside and now doesnt. Any recommendations on removing the interior panel from inside? Thank you!!
My handle is broken on the driver side door but I can't open it from either the inside or outside side in order for me to remove the door panel. What can I do
My rear passenger side handle isn't working. Can I use this video for the rear door handle as well? Also, the window will not roll up back there, it will roll down but not up. The driver has to roll it up. Is there something I can fix while I have the door undone to do the handle? Thank you so much for your video!
All of the doors are practically the same, so yes, you can use this video to do the other doors on your vehicle. As for your window issue, it sounds like you need a new window switch. The switches are sold 3 ways, 1) with a graphic (of a window on it) 2) with no graphic 3) with LED lighting and with a graphic
So recently the outside door handle went out but it worked from the inside now a couple days later the inside door handle goes out and the door doesnt want to open should i replace just the outside hand or the whole door system?
The rod goes in the holder, then you pull down on the rod to remove the slack, but not enough to actuate the handle, then close the locking clip on the rod.
So you could shut the door and test the handle. You want the window down in case the door handle is not adjusted properly or something is not correctly connected and it will not open, then you can pull the cable by hand that connects to the inside door handle to open the door and will not be stuck wondering how to get in the vehicle with a shut door that will not open.
Nothing, it stuck to the metal on its own. If yours will no longer stick you can use a product from 3M called Strip Caulk. It is a long strip of black material that is very sticky and weather resistant. It is commonly referred to by mechanics as "dum dum" because they use it to help fix stupid mistakes they make.
I have found a small about 6in long guide for the glass window it looks as if it has a screw that fell out. I hope you know what I am referring to? 9:48