Door Won’t Latch-3 Easy Fixes!

Подписаться 859 тыс.

Просмотров 2,6 млн

50% 1

Check Out Our FREE GUIDE: 25 Must-Have Carpentry Tools...Under $25 Each!
www.thehonestcarpenter.com/
AFFILIATE TOOL LINKS:
REXBETI 16pc Metal File Set (Great Price):
amzn.to/3rmGU8E
GOX Rotary Tool Kit 140pc (Also works great for grinding!):
amzn.to/30gl4ru
Black&Decker 20v Cordless Drill (Best Value/Best Reviews!):
amzn.to/3qhw3vz
Dewalt Drill Bit Set (Titanium):
amzn.to/3e72NVT
Loctite Super Glue 2-pack:
amzn.to/3qjBJ88
(These are affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU. We greatly appreciate the support!)
FOLLOW US ON INSTAGRAM:
/ thehonestcarpenter
FOLLOW US ON LINKEDIN:
/ thehonestcarpenter
Every house has a door that won't latch. This video from The Honest Carpenter will show you three easy fixes! If you like the video, be sure to hit like and subscribe!
Check us out at:
www.thehonestcarpenter.com
Tools:
Hammer
1" Chisel
Metal File
Screwdriver
Drill
Assorted Drill Bits
Materials:
Toothpicks
Super Glue
Caulk / Paint
How-to:
--Check alignment of the door latch. In most cases, the door latch is too low on the strike plate and won't fall into the latch hole.
Fix #1: Drive the Strike plate down
--Put a large screwdriver or piece of stiff metal against the inner lip of the strike plate and drive it down with several hard taps from a hammer. Check to see if door stays shut.
Fix #2: File Out Strike Plate
--Remove the strike plate. File out the bottom lip with a metal file. Be sure to pass the file back and forth to evenly remove material. Don't file all the way through the screw hole one the strike plate. Close door and see if it stays shut.
Fix #3: Reposition Strike Plate
--Remove the strike plate. Hold it in its ideal position, and use a pencil to mark new screw locations and bottom edge of plate. Drill out new screw locations with increasingly larger bits (tap a pinpoint first with a trim nail). Use a utility knife and sharp chisel to cut excess wood at bottom of strike plate position, paring carefully. Don't mess up the door jamb! Also mark and cut out excess wood in door latch hole. Put strike plate back on with screws. Fill in gaps in wood with either wood filler or several applications of caulk. Paint to match trim.
THANKS FOR WATCHING!! PLEASE LIKE AND SUBSCRIBE FOR MORE HONEST CARPENTER VIDEOS!
(Raleigh, Durham, Chapel Hill, Apex, Cary, Wake Forest--North Carolina)

Хобби

Опубликовано:

1 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,3 тыс.

@donnagray6822 4 месяца назад

As a new widow, I am trying to avoid unnecessary handyman bills. Thank you so much for this video. I was able to fix two doors in a minimum amount of time at no cost versus a $50-75 bill!

@richardzapor1983 2 года назад

As another honest carpenter since 1975, I have some suggestions for this common issue. Look at how the door is hanging in the jamb. If the bolt and strike plate hole are not aligning it is probably due to the jamb moving or the top hinge loosening and changing the alignment. The most common movement is for the door to lean at the top towards the lock side of the opening. Often just tightening the screws in the top hinge will get things into alignment . It can be good to remove one of the screws that is closest to the center of the jamb in the top hinge . Then drill its hole out with a 3/16 bit . Just drill through the jamb but not into the stud of the framing . Then use a 2 1/2 or 3 inch screw to screw into the stud and thus pull the top of the door towards the jamb . This will raise where the lock bolt hits the strike plate and often give a more permanent fix . I have also bought carbide reaming attachments for my drill which allow me to remove metal from the bottom of the strike plate, lowering the hole so that the bolt can hit the hole . I do this without removing or lowering the whole strike plate . A faster process. Of course all this depends on how far the bolt and strike plate are out of alignment . And as for lateral misalignment of bolt and strike plate , usually the bolt is not going into the hole due to the door warping. In that case the strike plate can be removed and the tongue cut or broken off to elongate the hole towards the outside and allow the bolt to go in . You can also remove the door stop if it is a non rabbeted jamb. Then latch the door and with it still latched reinstall the stop Against the door with a slight amount of play . Sometimes if just a little movement is required you can pry or tap the stop over slightly where needed to allow latching to occur .

@t.e.1189 Год назад

Exactly!

@tmontero8492 Год назад

Whew!

@roqeebozugha8163 Год назад

Lol this is a handful but informative thank you

@Lycius84 Год назад

Thanks for this, i was able to confirm this was my issue by pushing the door upwards when closing and it shitfting properly. Will have to work on this fix when I have time Edit: Lmao… sorry, fat fingers

@JJ-jt4sm Год назад

@@Lycius84 Indeed, shitting properly is *very* important.

@blaketindle4703 Год назад

Thank you for posting this! I’m getting tired of my cat barging in on me in the bathroom lol

@roachy69 3 месяца назад

Cats these days have no manners or consideration 😆

@mandymckeown8625 2 месяца назад

@@roachy69🤣

@kaiserbuns2606 3 года назад

I usually just rip the wall down and start over but this would work too

@Shanonmcnab576 3 года назад

Lol

@tomforward990 3 года назад

I tell the client we need to get a structural engineer involved but we can correct the problem

@knocturnal26 3 года назад

Classic 😂

@cammo7757 3 года назад

😂

@frankiemarrow7792 3 года назад

Hahaha...that was my first instinct, too, until I watched this video...LOL

@pilarq7886 Год назад

All youtube videos should just like this straight to the point, no intro no music Thank you

@schaadfamily4016 4 года назад

This was an EXTREMELY helpful video that solved a year long battle with a utility room door that would not stay latched!!

@wuffpaw 2 года назад

I always start with tightening up the hinges and making sure they're adjusted for even door fit. The screws that come with most hinge sets are always short and usually fail, especially in cheap doors. Take 1-3 of them out of each hinge one at a time and put in a 2"-3" #8 wood screw and now you're cooking with gas. Fixes 75% of latching issues

@jessicaroth49 2 года назад

Thank you. Total newbie here, but looking at the door hinges seems like it would be the #1step in troubleshooting.

@scottydog1313 2 года назад

Good point. I always replace door hinge screws with beefier ones. It solves problems before they happen.

@freshsodaa7023 2 года назад

@@scottydog1313 hello, im assuming you're good at this kind of stuff, you're the most recent comment i found so i was hoping you can have some suggestions for a problem that i have? If its okay? Basically to put it short the wood where the strike plate would go kind of broke off, so i cant screw in any strike plate cause there isnt wood there causing the door to open and close so easily even when its locked, i dont even have to twist the knob to open, i can just pull it. So i was wondering what can i do to refill that "hole" in order to screw a strike plate again

@scottydog1313 2 года назад

@@freshsodaa7023 You basically need to cut a repair tenon, or block, to fit into the mortise you're going to make. I'd cut the repair tenon out of wood a bit bigger than the damaged section. Make sure it's large enough to have some wood on all sides of the hole you'll need to drill for the door latch, and about 1/2 an inch longer than the location where the screws will need to go for the striker plate. Do not make is so deep that it cuts through more than 1/2 way through the door frame if you can help it. You want to keep as much structural integrity as you can. You can then use that repair tenon as a template to mark where you need to cut. If you're not familiar with using a hammer and chisel, watch a few YT videos, and practice on some scrap. If you're new to chisel work, always cut inside the lines with the bevel facing in towards the section you need to remove, when making cuts along your edges. Clean up the spot in the frame with a hammer and chisel where the wood was damaged. Make sure it's as flat and square as you can, but it doesn't need to be perfect Then glue and screw the replacement tenon into the squared out hole. Make sure to align the wood grain vertically, to match the rest of the door frame. Let the glue dry for the recommended time at the bare minimum. I usually wait 24 hours to be sure. Once it's good, clean it up with the chisel if need be. You will need to drill a new hole for the door latch. Shut the door and mark where the latch hits to use as a guide. Drill the hole with the recommended sized spade bit. Then you can reinstall the striker plate as normal.

@braybray4573 2 года назад

Door hinge knuckle bender would take care the problem 10 times faster?

@stephaniespencer7898 4 года назад

After waiting and waiting to have my hubby properly fix this... Thanks to your video, I got the job done successfully the first time! With the snow now here, we NEED an exterior door that closes and latches so that the wind doesn't blow it open. Thanks so much.

@riclmena9395 2 года назад

Get rid of the hubby if you can't fix things

@marcemarc6516 3 года назад

I love these jobs cause 1)they’re easy 2)pay well 3)home owners are always so happy to have a non sticking latching working door. I’m amazed at how often. Doors are installed wrong. Especially pre-hung doors that take a lot of the guess work out. If you’re a trade carpenter I’d suggest hanging Jams and doing the hinges yourself. If you master that, fixing junk mdf jobs is a breeze because wood jams, trim, and doors can’t be fixed with caulk and paint

@paulgibson3292 4 года назад

Thanks Honest Carpenter! I’ve fixed three doors by watching your step by step guide. It makes me feel really good to handle tasks like this by myself. Thank you so much for sharing your expertise!

@gabellagoosa2 5 месяцев назад

Thank you! I'm a 57-year old lady and I didn't know what to do. It worked. Thank you!

@michellefearon3000 4 года назад

Thanks to your video, I finally had the determination to fix the door latch of my bathroom. Your methods did indeed work!

@tonylove1261 5 лет назад

Suggestions: Check hinge screws: they loosen causing door to sag. Won’t need to mess with strike at all.

@TheHonestCarpenter 5 лет назад

Hey Tony, this is a really good point! I often start that way, and I wish I’d included it in the video. Shooting footage on the job site is distracting and frantic sometimes 😅

@renegadewa4183 5 лет назад

Tony NYC Removing one of the hinge screws from the top hinge and replacing it with a longer screw that will reach and bite into the cripple stud behind the jamb will also pull the door back to it's original position because the reason this happens is the door has begun to sag and the lock drops down resulting in not latching properly. I've used that trick for years. This is a great video and I've used every technique that was demonstrated. There is always more than one way to fix things.

@TheHonestCarpenter 5 лет назад

Renegade Wa That’s also a really good point! Thank you for writing in! This can solve two problems at once: if the shorter hinge screws have stripped out, a longer one often precludes you having to fill those old screw holes and retap them. Just need a long screw with a head that fits in the hinge leaf countersink and doesn’t stand too proud 🙂

@renegadewa4183 5 лет назад

@@TheHonestCarpenter Whenever I see this issue with a door usually the first thing I look at is the reveal at the top of the door. The lock side of the door often times will have a wider reveal than the hinge side and that tells me that the door has sagged a bit and a 3 inch screw that matches the hinge screws usually makes really quick work of it. But as I said before I've used every fix that you demonstrated in this video and all of them have worked. Another "fix" is when you open a door and it slowly closes by itself.............simply pop out one of the hinge pins and tap it a couple of times with a hammer bending it slightly and when you pop it back into the hinge it stiffens the hinge enough to keep the ghost from closing it. Keep up the great work...................guys like us need to teach the stiffs something every now and again..................lol!!

@bomaite1 5 лет назад

I have another quick fix that I do not use for my best work. If you try tightening the top hinge and that doesn't work, stick that screwdriver between the leave of the bottom hinge and carefully close the door on it. You are trying to bend the hinge leaf just a little so that the bottom of the door moves away from the hinge when it is closed. This is very crude, and a lot can go wrong, but this can work if you do it right. You can also put a piece of cardboard under the leaf to raise it. Again, not pretty, but quick. As a last resort, check the frame to see if the door needs to be rehung. Poor shimming is often the cause of the door sagging.

@TransplantHelper 3 года назад

Sometimes driving a 3-4” screw into the top hinge to replace one of the screws will raise the door enough to fix it. Great video!

@BrandonTran 3 года назад

Yep exactly this is something to consider. Gotta look at all of the factors.

@kerryfoster1 3 года назад

Yes the top hinge wears and the door can hang out. I always make sure the top hinge is fixed and not loose. Tightened up many top hinges!

@willwright3396 3 года назад

Use a knuckle wrench or a crescent wrench to bend the knuckles on the door hinge only. Tap pin out on top or bottom according to which one is closest to the jamb. Use a shim to space the door and adjust the knuckle to match the frame hinge.

@MrAssChapman 3 года назад

Doesn't even need to be the hinge. Can just be the jamb. This video blames the plate when the issue might be the door sagging.

@andrewarmstrong3556 2 года назад

You just helped me fix a bedroom door that was misaligned.......thanks!

@MartinParnham 4 года назад

Thank you so much for this. A combination of the filing, driving the wood down and tweaking the hinges fixed a troublesome bathroom door that was playing up for ages, even after I put on a new latch and handle.

@georgequalls5043 2 года назад

OMG! Toothpicks. That is how I have filled holes for half a century or more. Now I feel like a PRO.

@drochon6672 5 лет назад

I had a strike plate that was off just a fraction of an inch. The file was the perfect solution. This door has been an issue since we bought our home 15 years ago. I didn’t want to cut the jamb. Thanks for the video. Glad I found your channel.

@TheHonestCarpenter 5 лет назад

You're welcome, Dennis! It's crazy how often that tiny fix does the job. I'm glad it worked--thanks for watching!

@lydialas8756 Год назад

@Hello Dennis how are you doing

@mymai2792 4 года назад

Great tutorial. You have a fantastic style with thorough details & easy voice over. Thank you .

@moonchildyoushine2486 3 года назад

I know this was put up a year ago, but I just had to thank you. Our side door wouldn't lock and I was worried about having to drill new holes because my mom usually does stuff like that. I managed to glue the toothpicks in and drill new holes for the door to lock and I'm so happy it worked and I didn't screw it up. Thank you 💜

@germany2263 3 года назад

Oh my goodness!!! As a single female homeowner this made my day!! Option 2 worked like a charm. Thank you!!!

@davidsepke7105 3 года назад

A couple of quick things I noticed in this video. #1 the door hinges could have been spread to close the gap at the jam on the latch-side. #2 to fill the existing screw holes use a wooden golf tee with wood glue instead. That will fill the hole completely and allow for a better fit for new holes.

@logicnotfeelings3835 2 года назад

A golf tee....great idea. Thank you.

@uhN0id 10 месяцев назад

Golf tee is a great idea for filling a hole completely. Never thought of that. I always use toothpicks for things like cabinet door hinge holes that have come loose +wood glue to create more "bite" for the screws.

@bsfitz96 4 года назад

Thanks. I did your last step to include the toothpicks. Just repaired this two-year-old nagging problem. Our silly Lab kept getting stuck behind the door. Now I can close the laundry room door and not worry about her getting stuck.

@irinairina7188 11 дней назад

The fix number one worked my bathroom door. Thanks 👍

@wraith_heart 3 месяца назад

I fixed my door watching this! Mine fell into the first of the three methods - the strike plate was too low. Thank you. I feel accomplished lol

@florinsgondea6124 4 года назад

Very nice video. Simple, to the point and no "extra" talking. Thank you very much.

@TheHonestCarpenter 4 года назад

Thank you, Florin!

@rickrodriguez5254 4 года назад

Best dang tutorial I’ve seen. Thank you, Sir!

@lyndainfj9099 2 года назад

First tip worked great. Back dog door was blowing open because it wasn't latching. I have a home daycare and over time the kids yanking on the door caused it not to latch. I never comment but I agree with everyone on here- concise, informative, well made how to. Makes me want to tinker with other stuff, very rewarding.

@Jammer-gm6sq Год назад

Seriously, thank you for putting this video out. I've messed with this door for like 2 hours before I thought, "Why don't I search RU-vid for help?" My problem was fixed within 2 minutes thanks to your video.

@nancyfritz525 3 года назад

Loved this! Straight and to the point! Thank you! Excellent information. Fixed 2 doors!

@bethanykarasek7819 3 года назад

This man is out here doing gods work 😂 found this in the middle of the night but I’m gonna try these tomorrow!!

@sreehill Год назад

Hey thank you so much for the great video. I appreciate how careful and considerate of the wood you are. I've got a door that's pulled away from the jam and I had no clue where to start. This gives me a great beginning and hopefully enough to fix it!

@teresariggs430 10 месяцев назад

After watching this, I just fixed three strike plates in my home. Thank you! Now I don't have to wait 6 months for my husband to do it!

@z1522 4 года назад

If the old holes keep messing up proper alignment with new holes, even after the toothpick filling, you can drill out 3/8" holes, then glue a 3/8" plug. This should provide a fresh wood area wide enough to mark and drill new holes without the hassle of bits wandering into old holes, or shifting from varying densities of fillers.

@AbhijitShrikhande Год назад

Where do I get a 3/8" plug? Sorry, I am fairly new to DIY.

@jeromemarvs5787 4 года назад

Thank you! Because of your vid I was able to fix my door that wont lutch.

@TheHonestCarpenter 4 года назад

@Random Videos Good to hear! I'm glad it helped :)

@jacobfranklin1815 2 года назад

Wow excellent content, I really appreciate you getting straight to the advice and not using an intro. Technique #3 was explained very thoroughly and was overall very educational. Thank you so much!

@chuckb470 Год назад

Great video! Clear and to the point, and presenting different options. I'd add to what others have said; check the hinge side first. Screws can loosen over time. Another first check to do is to remove the hinge pins while the door is still in the closed position and shim it in place with equal spacing on both sides. Then carefully bend the hinge tabs so that they all line up. Replace the pins, THEN see if you need to adjust the striker plate.

@Ninja2FiftyR 3 года назад

Wooden golf tee in old screw holes. Glue, hammer in, let dry, cut off excess.

@madmanau8730 2 года назад

Ok that's awesome. Stealing it. Thanks.

@vbachman6742 2 года назад

Wooden matches also work very well for those of us who don't have golf equipment lying around.

@AARON12895 4 года назад

Thank you, the best tutorial video I ever view lately. Very detailed, step by step narrative, never overlooking the critical areas. A big yes!

@TheHonestCarpenter 4 года назад

Thanks so much! I appreciate you watching 😀

@GravyCramps 4 месяца назад

Thank you! I spent an hour wrestling with a stubborn door before I gave up and searched for a fix. Took me 3 seconds to bang it into place. ❤

@KimChrisDes 3 года назад

Hi Ethan! You are a super rockstar for sharing this. I had this exact issue in a brand new home. The issue popped up about a week after the one year warranty expired. The door latches worked fine all year prior. I went a couple of nights without being able to secure my back door. I wasn’t quite sure how to find a vendor to do this repair As most door and window companies are only interested in sales and installation, not Repair. Anyways I had to lower both my deadbolt and door knob strike plates and option three was required. In my case I used both a wood chisel and a Dremel to bore out the holes but I needed to understand how to put it all together and you’ve crafted an excellent instructive video here. Thank you so much Ethan. I am eternally grateful!

@logan5326 4 года назад

Great tutorial video: clear, easy, intelligent and straight to the point and very detail oriented!Thanks bro!

@TheHonestCarpenter 4 года назад

@Logan You’re welcome! I really appreciate the positive feedback 🙂

@williamwoods2547 3 года назад

Three good ideas. Another issue occasionally encountered with the strike plate is the 'tongue' of the strike plate, which extends into the mortise. If it is bent too little it can prevent the bolt from entering the mortise enough to securely latch. Remove the strike and bend it with a couple of Crescent wrenches, one to hold the strike and the other to bend the 'tongue' if placing a large screwdriver against the 'tongue' and hitting it with a hammer doesn't work. Several viewers mentioned loose hinges. Excellent point. If the screw holes no longer hold the screws securely they can be repaired with toothpicks, etc. The first thing I check is the door reveal. Occasionally hinges become sprung. A door doesn't have to sag much for a lock to not latch. If the reveal at the bottom edge of the door is too large place a small piece of hardwood dowel, 1/4" or 3/8", as close to the knuckles as possible and gently close the door on it a few times. This will push the edge of the door towards the strike jamb and raise the height of the bolt. If the top of the reveal is too close to the strike jamb, remove the hinge pin and use an open end wrench, just large enough to slip over the hinge knuckles, to bend each knuckles slightly away from the door. This will pull the door slightly away from the strike jamb and raise the height of the bolt. This can also fix a sagging door that a customer thinks needs to be planed down because it is rubbing against the strike jamb. If the hinges are heavy duty you may have to remove them and place them in a vise. I really enjoy your videos. Thank you

@CM-uv6hb 2 года назад

Just chiming in to say you saved me a lot of guesswork and hassle with this excellent video. Got a chisel and cleaned out the hollow of the strike plate and whacked it back into alignment. Many thanks for sharing your expertise!

@No2RefinedCARBsLC Год назад

What a great idea that you have for filling the old screw holes with tooth picks. I've successfully moved two strike plates on the same door using your third method and it was much easier than I thought. Thank you so much.

@Sigkeeper1 5 лет назад

After reviewing your problem solutions for a non- locking door situation I gave this additional thought. I had bought a new door lock set and the door latch bolt would not lock into the striker plate. I looked a bit more carefully and realized that the new bolt that I had installed had the bolt angle coming in at the opposite direction from what it should have been. My solution was simply to reverse the bolt by turning it upside down which then positioned the bolt angle to be consistent with when the angle of the bolt hit the striker plate. This fixed the problem and did not require any of the other solutions that you suggested.

@TheHonestCarpenter 5 лет назад

@Sigkeeper1 Thanks for writing in! You're exactly right, the curved face of the latch should always point towards the strike plate. This way it will naturally be forced into the latching mechanism. It's an easy thing to overlook sometimes when you're installing new hardware :)

@bigdog8059 5 лет назад

Lol

@christopherlawler3033 5 лет назад

Sometimes shimming the door works as well... especially if the door is sagging or not squarely hung in the frame to begin with, either due to worn-out hinges, or because the door frame assembly isn't square to begin with.

@jpaugh64 2 года назад

Your entertainment skills have improved drastically in just two years. Way to go!

@iwonahopkins5297 2 года назад

Saved my life literally. I followed this and fixed the lock in the door that never worked. OMG

@flycow69 4 года назад

Nice video. I always have extra strike plates in my tool box when anyone of my tenants move out. I buy new locks to install n I keep the old strike plates if they are in good shape and some of them are thicker than others beside recycling is a good thing.

@TheHonestCarpenter 4 года назад

@Frank Fakir Thank you! Good call on the extra strike plates. I used to have stashes of most types of interior hardware in my old shop, and also my van. You just never know when I might become useful 🙂

@buzoff4642 3 года назад

"I buy new locks to install" Lowes will rekey locks, for cheaper than replacing.

@jumpercable20 3 года назад

I've spent time using the same procedure at my daughters house in South Carolina, so I sent her this video. Now every time she opens a door, she'll think of Dad.

@chentepacololo4286 3 года назад

@user-tn1oc2lx5w 11 месяцев назад

I did, for the most part, step by step of your instructions and door latches perfectly! Thank you so much for the easy to follow tutorial. I like that idea of using tooth picks to fill the holes.👍🏼

@kathyr.6825 3 года назад

I did it! Mine was hitting too high so I moved strikeplate up a smidge and voila!! I did have to chisel a bit of wood but it was easy and the door closes tight now! Thank you for your clear simple instructions! 🙏☺️

@booneglock4588 4 года назад

Watched this video and had my bathroom door fixed in ten minutes.

@wolf2351 4 года назад

Great advice. Now i have to do this with my front door.

@MichaelPateras Год назад

Didn't notice the channel when I clicked on the video (was searching for this repair), but instantly recognized the voice :p. Thanks for your great channel!

@thelred-ph3lq 2 месяца назад

The color of the handle of that multi-bit screwdriver is great. Easy to spot in a toolbag.

@harvendraraj 4 года назад

It Actually works,i just fixed my door lock with step no 1.Thank you !!

@erichaley88 4 года назад

Thank you for this video. I had to do the last option but I was finally able to fix two doors that were bothering me and my wife since we moved into our house.

@TheHonestCarpenter 4 года назад

Hey Eric, that’s great! You’re welcome, thanks for watching 🙂

@charlestatakis9363 3 года назад

I enjoyed seeing the toothpick/superglue procedure, your experience skill level is appreciable. I almost bought quick set wood epoxy putty. You saved me $6 and time as I needed to move the screw hole about 1/16" and that's the procedure I'll use. Thanks!

@kaymack5304 4 года назад

I can't wait to try these ideas. I have 4 doors in my house that drive me crazy and I've never known what to do about them. Thanks!

@chifan7 5 лет назад

A Really Great informative video! Thanks so much.

@TheHonestCarpenter 5 лет назад

You’re welcome chifan! Thank you for watching 🙂

@williamforsythe5850 3 года назад

The toothpick is a great idea, I always drilled the hole out to 1/32 or so smaller than a dowel then glued and hammered the dowel in the holes.

@PeterLawton 3 года назад

I like to use 1/4" drill and matching dowel, with wood glue or even Elmers. It's a tight fit and dries firmly in seconds. The old threaded wood was weak; the new solid fill is great, even when the new hole is close to the old.

@MarkRosengarten 2 года назад

THANK YOU! I have had three doors in my house that have not latched properly or consistently in more than 20 years. I wanted to hire someone to fix it but no one seemed to be interested. All to the good! I had to fashion a shim block for one side of the routed cutout on one side and cut deeper into the other for two of them to shift the cutout position up or down by about half an inch, fashioned a dowel that perfectly fit the screw holes (drilling out the holes first) and put everything in place with Liquid Nails. Then I put the strike plate on after trimming out what was needed on the surface to fit it. For the third, the file trick was enough to get it working. THANK YOU!!!!!!!

@shanefrank3281 4 года назад

Best video i've seen on this. Everyone else goes strait to the relocation which is often more than what is needed. Thanks

@williamfitzer4805 4 года назад

When I have had to do the third fix, I use dowels instead of toothpicks. Works better. I have a homemade dowel plate and can make 1/8” dowels to fill the screw holes. Works great.

@harveylong5878 3 года назад

Ikea furniture is great resource for wood dowels. most build it yourself DYI furniture has them, I liberate the dowels when I finally throw out the flimsy Ikea crap

@lcook0825 4 года назад

I find golf tees work the best at filling old hole.

@ken_9359 4 года назад

I like that idea. We used chopsticks from Panda Express and wood glue. Hammered it in and break it off.

@davidungerecht78410 4 года назад

I use em too, Get mine @ Walmart in the sporting goods section.

@jasshank216 4 года назад

David Ungerecht mmmmjm Jimmu

@jamaniandjaquesps1389 4 года назад

chop sticks and cabob sticks work good too

@eltiburon2796 3 года назад

Second. Fixed two doors in my house with them work way better than toothpicks

@justinjacobs670 9 месяцев назад

Thank you so much! I've lived in my new house for two years. I didn't realize that my bedroom door wasn't latching properly until I locked it last night and the door opened even though it was locked! Your first tip was what was needed and it worked!

@northarella 2 года назад

My grandparents spent 3 hours trying to fix this before I woke up. I googled it, found your video, fixed it in 20 mins flat ahaha-- thank you for explaining so well, it was a very easy fix with your help! :)

@bwp.bobsworldpodcastpodcas4844 5 лет назад

Enjoy your videos . You helping a lot people

@TheHonestCarpenter 5 лет назад

Thank you Bobs World!

@mnm1067 5 лет назад

I like to use golf tees for filling in the old screw holes

@edover50 5 лет назад

Golf tees work awesome as does bbq skewers and dowels. The dollar store has a great selection of skewers, dowels, popsicle sticks etc. For a few bucks you can keep a nice selection of ready to go plugs for your kit.

@corydriver7634 5 лет назад

Ed Over50 I do the same but have forgotten the dollar store is a great cheap resource, thanks for a reminder.

@JohnnyTalia 4 года назад

I use wooden matchsticks from "strike anywhere" matches. I just clip off the head, coat them with glue, and tap them in with a hammer. Then I use a sharp chisel to trim them flush.

@heavenstomurgatroyd7033 4 года назад

mnm1067 - that's so brilliant! I often use toothpicks for golf tees.......

@markme4 4 года назад

@@JohnnyTalia Wont using match sticks void your fire insurance policy ?

@johnfritts371 3 года назад

Thank you. I was frustrated with my latch and now it's fixed! Had to lower the strike plate and didn't do as patient a job as you, but it's FIXED!

@jbcunn15 3 года назад

I typically don't watch these types of videos, but you earned my subscribe due to the amount of explaining you gave us. Thank you for sharing your knowledge!

@doconnor1354 5 лет назад

Wow! You seem to have the fix on the most annoying home owning issues. Thanks again for the "fix".

@TheHonestCarpenter 5 лет назад

You’re welcome, Dennis! I’m running through the greatest hits 😂 Thanks for watching!

@knowledgeupon3142 5 лет назад

You can also drive a 3" screw into the top hinge center screw. It will catch the framing and pull the door up. Use an impact driver, being careful to not overtighten and break the screw head or split the jam. This process will pull the door up slightly providing enough upward hang to allow the door to shut. This however, may cause the door to swing open or shut depending on the door swing.

@rayhorner2965 4 года назад

For the bathroom, it always swings to open. 😍

@hp3078 2 года назад

So longer screws in the top pull the door up? What about in the other hinges

@kiranramaswamy Год назад

Was a little project for a friend. The socket was at least 1/4" out of place and the door apparently never locked. I had to use the third trick, as the first two did not work much for my situation. Followed the instructions. Easy and clear. Worked like a charm. Thanks for the details. Very helpful.

@jenniferpenny3533 3 года назад

The first suggestion did the trick! Thank you!

@Rocadamis 3 года назад

Sometimes the strike plate and latch are in the right places of the door and jam, but over time the door has shifted in alignment (tilting down). To fix it you can bend the hinge loops inward (on the door side) and it will move the top of the door enough that the latch and strike plate are now back in alignment.

@jonjon3719 2 года назад

Done that works great

@jaredrogers7938 2 года назад

I worked on my in-laws door a few weeks ago and tried that but their hinges were too beefy to bend easily w/o leaving obvious tool marks so I switched to unscrewing the bottom hinge (frame side) and using pieces of wood shims to shim it out a touch and now works every time.

@johnhunter1262 5 лет назад

I feel that you did this fix mostly on the wrong side of the door. I would have asked myself first why has the door dropped? As already mentioned by someone else worn hinges. If that were the case then either replace the hinges or a temporary fix is to pack out under the lower hinge. Another fix would be to bend either half of the bottom hinge out or the top hinge in. This is done with the hinge pin removed. If the door frame has moved because of house movement then what you did would work. I used to fill screw holes like you do however these days I find that a better solution is to drill the old hole out and glue in a dowel, trim with a multi tool & then drill fresh holes. Cheers

@TheHonestCarpenter 5 лет назад

Thanks John! You’re right, much of the repair can start on the hinge side. I’ve definitely had success shimming out the lower hinge. The only time it’s been a problem is when the door clearance is already tight on the latch side and moving it out makes it tighter. But the other things you mentioned I haven’t tried before. I’ll give them a shot!

@lydialas8756 Год назад

@Hello John how are you doing

@user-pb7vr2ve5n 9 месяцев назад

Worked great! After watching several videos that lacked detail or more than one option, this one covers everything. Thank you!

@lastminutejoe Год назад

strike plate was out 1/4 inch on my 2 year olds room door, she easily pushes the door open at night now that she can climb out of her crib, moved the plate up and loved the tip using toothpicks to fill screw holes, used a little temp glue to hold the plate in place to make sure it latches before i screwed in, works perfect, thanks for the video man appreciate it.

@mostlikelywedoitservices9743 5 лет назад

My goto tool for latch plate is my Milwaukee high-speed rotary tool with a carbid bit. leave it screwed in to remove the metal. Easy.

@OMGWTFLOLSMH 4 года назад

That blows wood and metal filings all over the homeowner's floor. Might be a good solution in conjunction with a vacuum.

@CT2507 5 лет назад

excelent video and well explained.

@TheHonestCarpenter 5 лет назад

CT2507 Thanks so much! 🙂

@coreylang15 2 года назад

This was a life saver. I've not been able to close my bedroom door for a little over a year due to my house settling slightly I'm assuming. Never thought about using toothpicks as the hole filler. The door frame wanted to cave a bit when I went to chisel, so I had to finish by cutting it out with a knife. Other than that, option 3 worked out well for me.

@joemize92 2 года назад

I lived in a very Soddy trailer years ago and every door in that house had a latching problem. Through trial and error I eventually figured out exactly the three methods that you’ve shown. To cut out the wood for the door jam I just used my screwdriver as a chisel. Makes me feel good knowing I wasn’t crazy.

@jameshalleron7484 4 года назад

You might want to inform your viewers to check to see if the door itself is secure at the hinge. Bathroom doors are usually hollow core and the hinge screws are real short. Making the door level usually helps aligning the the lock to the strike plate.

@ddforrester 5 лет назад

Put baking soda on the toothpicks. Fill the strike plate jamb holes with super glue. Sprinkle more baking soda onto toothpicks as you insert them. The soda activates the super glue within seconds. No ten minute wait.

@TheHonestCarpenter 5 лет назад

I’ve never heard that trick before dd! Thanks for sharing! 😄

@spiccolirocks3580 5 лет назад

@@TheHonestCarpenter Luthiers use it on guitars to fill in the nut where the strings have worn the slots down. Now the slots can be filed to the appropriate height. I've never seen a carpenter with a box of arm n hammer in their tool pouch?!

@TheHonestCarpenter 5 лет назад

Spiccoli Rocks I can borrow from the homeowner! 😂 Thanks for the luthier tip. Do you make/fix guitars? I’m going to start doing tip/trick collabs with other tradespeople on my website. I’d love to do a quick article on something like this, if you’d ever want to reach out to me there www.thehonestcarpenter.com

@spiccolirocks3580 5 лет назад

Yes i do work on guitars... That would be cool!

@TheHonestCarpenter 5 лет назад

Spiccoli Rocks Awesome! Drop me a line whenever you get a chance!

@laurendao4467 Год назад

Thanks so much for this. I watched it a while ago just for fun, but after removing all my doors to paint them and replacing all the hinges, I have a few doors that no longer latch. I’ve watched this again to refresh my memory. I appreciate all your videos.

@MikeyG003 Год назад

Damn, the second hammer and screw driver trick worked for me. Was hesitant on fixing these, thinking I’d have to relocate the screw holes. Saved me time! Thanks

@its_mookie 4 года назад

Thank you for posting this my bedroom door was driving me crazy

@humclarge 4 года назад

Believe me.I can understand why you have to claim that you're honest.I live in the land of cracker box palaces where a home goes up in a day.When you count all the trades and their shortcuts and abilities to camouflage gaps,binding pipes and doors and windows hung out of plumb. It can be a never ending fix it project. Thanks!

@mikel5582 3 года назад

Sadly I've owned 3 of those cracker boxes and can attest to the cover-ups, complete lack of craftsmanship, and terribly executed solutions to errors. 🤬

@brittanymiller5585 3 года назад

Appreciate it! I had two doors that were having latch issues, and I decided I was going to file the first one down. When I went to check the second one, someone had already filed that one, so I switched that plate with the first one for an instant fix :). The door is definitely sagging on the second one, so I may have to mess with the top hinge.

@victorvong3789 4 года назад

filling working great !! Thank you

@davidmoran4471 5 лет назад

first check the hinge side, top hinge screws loose will allow the door to drop. Shim bottom hinge with thin, cereal box, cardboard to shift the latch side up.

@TheHonestCarpenter 5 лет назад

All good suggestions David. The three repairs I’ve shown are for significant hinge side sagging (and if you don’t want to try rehanging the door). These small hinge side tweaks can help tremendously though. Thanks!

@MAGAMAN 4 года назад

Don't use cardboard for this. It will continue to compress over time and you will be back fixing this problem again in a month or even less.Use a thin piece of metal, like a strip cut from coke can.

@buzoff4642 3 года назад

@@MAGAMAN Or coins.

@drewfortwenty5519 5 лет назад

Put some longer screws on the hinges and possibly angle them to the side so you can catch the 2x4

@sjcali6161 4 года назад

drew forTwenty that’s hack work. You shouldn’t be angling the screw. There’s better ways to do it.

@TheCrookHook 4 года назад

Very well explained and filmed. Glad I subbed to this channel!

@jeremiahgutierrez6902 3 года назад

This is amazing and exactly what I have been looking for. Thank you so much for the help on this. Made is look super easy to do. Trying Step 3.

@tommyboybr 4 года назад

RU-vid moments, I don’t even have to fix a door that doesn’t latch but I watched the whole video like: ohhh, ok, huh that’s interesting, and some of the stuff I was like: yeah, that’s what I would have to do. Lmao 😂 😂😂 Oh RU-vid, I love you hahahaha

@TheHonestCarpenter 4 года назад

That's what youtube is for Mk3 😅

@tommyboybr 4 года назад

@The Honest Carpenter Hahaha right, knowledge is always welcomed right? I would love to be able to build things with wood, but I’m going to pass it to my next life and leave it for the pro's like yourself. 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼😁