About Volumetric Dosers - SCM:
SCM series volumetric dosers are suitable for auto-proportional mixing of virgin materials, regrinds, masterbatch or additives. A gear motor with a gear ratio of 38:1 is coupled to a dosing screw of 12, 16,20 or 30mm(0.47, 0.63,0.79 or 1.18inch) in diameter to give a total of four models with output ranging from 0.1~110kg/hr(0.22~242.5Ib). Double-color dosers are available for collocating with any two of single color dosers if required. Five components of automatic mixing can be realized if customers adopt four-color dosers.
Features
1. Dosing screws are chrome plated for durability.
2. Unit is comprised of standard modules for ease of cleaning, disassembly, and interchangeability.
3. Hopper magnets are equipped in standard base to avoid molding machine screw damage.
4. External signals can be directly input to control box.
5. The current mode can be recorded without interrupted by power failure.
6. Compulsory material cleaning makes it easier to replace masterbatch.
7. Applicable on extrusion machines, just need to make a few wire replacements.
8. Rotating speed can be automatically adjusted according to extruder processing speed, which maintains the fixed proportion of masterbatch.
9. 50 recipes are available for permanent recording of material discharging time and finished product weight (for extruder, it is max. throughput per minute).
10. Use brushless DC motor and free from maintenance.
11. Both masterbatch blockage and overload can be detected, then machine will halt and sound an alarm.
12. Based on customers demand, mold cycles can be set to add additives periodically so that micro-metering can be achieved.
13. SCM-4 is standard equipped with the main hopper and a blender.
14. Equipped with RS485 communication function (SCM-4 excluded).
15. For collocating with SHD-100~300 or SHD-160U~450U dryers, the heavy base should be selected.
16. SCM-4 is capable of adding four kinds of masterbatch at most.
17. High-temperature doser SCM-H is optional for applying to PET high-temperature situation; the water runs in its cooling part must be room temperature water.
18. Blender is an option for customers to make materials evenly mixed.
19. Main material hopper is optional equipment for customers to feed main material.
20. Low level sensor can be opted to give an alarm when masterbatch is insufficient.
21. Screws with diameter of 30mm/1.18inch can meet customers, requirements of large output.
22. Optional 100kg/220Ib base to satisfy maximum discharge volume(without mixing function).
For Product Enquiry Visit: shiniindia.com...
Email: salesindia{@}.shiniindia.com
Phone: 02135 660 600
Address: A-46, Chakan Industrial Area, Phase II, Chakan MIDC, Vasuli,Taluka Khed, Pune, Maharashtra 410501
Website: www.shiniindia...
10 окт 2024
