Double Warping Frame Loom 

Thank you! In sixty years my viking longship will have sails!

Thank you so much! My loom just came without directions for how to use the heddle bar. Your directions are so clear.

Thank you so much. I think I have the same brand of loom (although the heddle is slightly different) and the same brand of cotton yarn used for the warp. This was so helpful. I don't know what I'm doing but this is a great first step!

Thank you! My loom came without ANY instructions ... and this is the first and only video I've seen addressing this. So happy I found your page ... and you got a new subscriber in the process!

I just purchased a simple tapestry loom such as this one and I needed a quick explanation as to how to double warp it. You nailed it! Super straight forward too.

wow! I have a friend that is spinning wool and now wants to learn to weave...I'm sending this to her. Thank you.

I got a loom for Christmas and it had bad instructions for putting it together - I got it together than reaslised I didn’t know the first thing about how to use it! Luckily I found your video. And your instructions are clear and easy to understand. Thank you! 😊🙏🏻

Thanks so much that’s the best tutorial for double warping with a header bar I’ve seen.

I made a loom from a spare stretched canvas and after watching this, I'm wood burning a dowel into a heddle bar

Your instructions just make so much sense!!! Thank you for sharing this tutorial.... I found it very useful and helpful with the written instructions that came with my loom... which were borderline non-existent!!

This really helps understand the basics of weaving on a loom-thank you...I haven't done any weaving since I was a teenager. I am working on a art project and am trying out some prototypes methods. I am trying to weave together a bunch of red willow sticks, approximately 60 inches long, into a sheet that I can form into a cylinder. The red willow sticks are approximately an 1/8" diameter and then taper down at the tip of the branch. My first attempt was to hand weave (no loom) each stem together with some 16 ga. copper wire, spacing the wire warps about 10 inches apart. Pretty difficult to maintain a straight warp line bending each wire by hand. The other hurdle is that each stem (my weft) is tapered. My thought is to build a simple loom. Still have to experiment to find some wire that I can use as the warp and be able to lift the wire. Thanks again for a clear concise instructional video❤. Subscribed.

Thank you so much for this, you have solved my problem of warping with a heddle bar

I just purchased the same loom and I was like what the heck is this thing. Thank you for making this video.

Really useful - this will encourage me to use heddles in future, I really need to speed up with my weavings!

Thank you for sharing your tutorial. I'm a newbie so this was very helpful.

You are such a clear teacher, thank you for your time and expertise.

Excellent Video! As a new weaver this was exceptionally helpful! Thank you😊❤

Thanks!

I just bought a loom that has a huddle bar with no instructions on how to use it... thank you so much for this video!

THIS IS WONDERFUL THANK YOU

Very cool

Great video. Thanks for posting.

Thank you!!

Tutorial on how to make a heddle bar next! I wanted to make something like this with two loom frames and nails, but this looks much easier!

Ingenious!!! Thank you VERY much! This is ABSOLUTELY the BEST video on the subject! 1000 likes and thanks from me! 🌺🌺🌺

I really like to learn and make some

Very helpful

Such a great video. What a wonderful technique. Thank you 😊

Thank you!!!👏🏻👏🏻👏🏻

Beautiful 😍. I need the frame.

Can this method be used to make a pouch without sewing? Or is a piece of cardboard the best option

That helped. Thank you.

Infinitas possibilidade, incrível

Thank You at last I understand .

Thank you so much! We stayed up till 11:00 to get it right😂

I like to learn

Can you get the benefit of the huddle bar moving each second warp up when it’s on a single weave? Because say you want to use larger yarns and textures. Or is the purpose of a huddle bar only for A double weave?

Hello! thanks a lot for this video. I just would like to know how do you do when you have finished your project and you want to take it from the frame. You just cut the yarn at the top and at the botton? or is there a specific way to do it? Thanks for your help!

Is there any way to lengthen the warp? Maybe cutting each end and rolling it on the back? I weave on a traditional floor loom, so I bought this one for samples. I was wondering if I can make some bigger ones. Thanks in advance

Honest Question: What are good small weaving projects for beginners? I was thinking of this as a hobby. I also knit a bit.

I did tapestry.

Do you have directions to cut that heddle bar correctly? I have a small IKEA loom and that would make its use far easier... I can’t seem to find any info on how to make one, how to measure or angle the cuts etc... could you direct me to a resource by any chance? Thanks

I am using a very tiny loom, and am a beginner. It came with a wooden comb, flat shuttles and a heddle bar. I haven't tried double warping it yet, may try that. I find that once the work gets past just over half way, things are too tight and I have to take out the bar and use a long needle for wefting. Is this usually the case? It may be because my loom is very small. The finished work is 18 X 12cm.

Hi! Very useful video, thanks! I have a question, how long can you weave with the heddle bar in it? When you are closer to the top, do yo need to remove the bar and finish it without? Thanks!

Is there a link somewhere to this loom? I would like to buy a nice simple loom but couldn't find one with this double warping heddle bar

Great video

Can you make scarfs on this loom?

I've been practicing on a pin loom (potholder size) making blankets and scarves and shawls for my fiancée. What, on this type of loom keeps the edges straight since they are free standing? Do you just have to painstakingly get tge feel for tge uniform tension?

Thank you for this video. Can I ask where you got your loom from? Thank you

Can you direct me to plans for this design?

I’m new to weaving. Can I use a heddle bar to double warp? Just starting with a bracelet with very fine linen yarn. Thank you.

I... I just wanted to watch people weave not get drawn into it. But damn ok guess I'll have to buy a loom now.

i really want to know how much milimiters are between each thread, that size is exactly what i need

How to continue the same work to large

What is this type of weave called. I noticed that it shows the weft unlike when your just using a single warp instead of this double warp. I really like the look but don’t know what it’s called to learn more about it! :)

How can I make a handle bar?

if you don't double warp are you saying the heddle bar isnt necessary to weave with after warping the loom?

where can I purchase this loom?

I cant figure out how the heddle bar sits on the loom is it freestanding because it is wider than the loom

Can I make a pouch using that same kind of frame loom with double warping?

I saw this warping method before and wonder what the benefit is of using two seperate warp threads. I'm double warping with one thread. Does your method give you more control over the warp tension?

How do you say this on your phone about the room

loom ki kimst howprise this i want to buy this

Hi how do I order the loom

So the heddle bar does not attach it just stays in place with your warping

your voice sounds like a cup of hot chocolate in the winter

I got a question I don't know

Um

رایگان

Hard to see your work. Everything is blending in together.

A LITTLE DIFFICULT TO LEARN WHEN THERE'S NO SOUND!!!

Great to see you

Where can I purchase this loom?