Dream boat project 1976 Mako: How to do fiberglass work 

I love how humble you are. And I love it that you guys restore the 76. Thats year I graduated high school. 🤪 My first boat was a 1960 Sea ray. 18 plus I bought that saved up for it when I was 20 years old. I hope you guys get a lot of subscribers good luck to you.

Can’t wait to see it!! Once I buy my house this year, I’ll be getting a boat within the next two years! Super sick and bad ass, LOVE YOU

Mako is a good solid boat. You will get a lot of enjoyable use out of it. It can handle just about any conditions out there. Good Luck !

Taylor is an extremely fortunate man to have a wife like Cheyenne who not only loves fishing, hunting, diving, cooking, is not afraid to get her hands dirty, annnnnd is gorgeous. Taylor is a fortunate man indeed!

Ok. Ready for the next video.

Looks great. Love your enthousiastic DIY attitude.

Enjoying the channel! The boat is going to be killer. Mako boats always caught my eye growing up in Marathon, Fl. They just look mean especially the older ones. Can’t wait to see it in action!

You guys do nice work. We ran Mako's when I was in the Coast Guard off Long Island (in the 80's before you were born, god I'm old......LOL). They are tough and handle choppy conditions really well. It will be one serious fishing rig when you're done. Also a big fan of the center console. Ours were Volvo Penta inboard out boards which were nice but I like your outboard set up better for fishing (also love the transom jack, will give you much better performance) , it gives you more deck space. Looking forward to more videos and seeing how it turns out!!! Thanks

Thanks y'alls I was looking to rebuild a boat myself This is so cool!

Shoo girl! Can't wait to see the final! Like I said in previous post: Nothing but a little TLC and she'll get and be better with Age! But, really interesting seeing you working with fiberglass. Pretty cool.. But yep, I see that you grew up with some brothers. You know your way around the ol power and tool shed! Great job Cheyenne, oh yeah and Taylor! 💪🎣

You guys are a great team, respect on doing the hard yards. That Mako will be a winner with all the love you are giving her! Thanks for sharing, these little projects are character building.

I just watched Cheyenne and Taylor sand, fiberglass, sand, sand and sand again. Taylor was in coveralls and a mask 90% of the time. I knew it was her because of the voice:-)) Dang it, I'm a fan.

Awesome job, I dont miss the glass boat resto's lol. For future if you rough the edges of your cut cloth it blends down a little nicer. Good to see you used the peanut butter/rice mix to jam into the edges.

Nice work guys. Look forward to the next episode.

So far, so good.......looks good and best wishes!

Can’t wait to see it finished!! Boat projects are fun, you get to see all your hard work payoff!!

Just a tip for your next project...if you pre-drill your holes in the plywood...you won't struggle with screwing them down and will save you some frustration. Also...just curious why you wouldn't reinforce the entire top section or round off the plywood edge to eliminate the lip on the side of the plywood. That edge looks like it could be a toe stubber if you aren't paying attention when you get a fish on. All in all looks like a fun project...can't wait to see when it's finished.

That console is the perfect size if everybody would put a smaller console in they're boat they have so much more room good looking boat

Peco mako supremo! Lots of potential with some metal/glass inventions, fun stuff!

Looks like things are coming along well. Keep up the hard work and there will be plenty of time to play later on. I can't wait to see the little things you are planning to do to personalize the boat to your needs and how you pull them off. Keep having fun!

Very cool. It’s looking great.

That was excellent.You guys work well together.Really enjoyed learning from your project.

Good job! Can't wait to see the finished product. Thanks for the vid, Cheyenne!

Interesting project. Good job.

Y'all are killing it :-) Looking great :-)

Looking good, can't wait for the next part and the colour sounds perfect. Taylor makes a superb co host. Keep up the good work !

Great job! That thing is solid as a rock now! Huge improvement!

Have fun repairing the boat.

Wow, 24k subscribers! Growing fast, congrats.

I enjoyed the video. Looking forward to next step.

Great project to do as a couple. Nice work, excited to see the finished product after completion :)

Good video as always please stay safe out there

When I lived in the Hobe Sound, Jupiter area in the 80's Mako was the boat to have for offshore water sports, the deep Vee could handle seas you really shouldn't be out in and the hull was bulletproof. I may have known the previous owner. Best of luck to you !!

Nice work looking forward to next video and hopefully soon it hit the water

Those kitchen silicone spatulas make spreading thickened epoxy very easy.

Wow nice job there and bonus points for wearing proper clothing! 😁

Nice boat

Good work!! 👍Team work!!👍

One of the really nice things about doing all of this, is how well you'll know your boat from jump street & be able to trouble shoot & fix anything that might come up! You haven't said Cheyenne, how is the wiring?! Have the harnesses been done well?! (SUGGESTION FOR NAME: REEL JOY)

Wow nice job u guys!

Awesome job a solid hull will allow you to have more fun.

Love seeing home projects, been a while since ive messed with or been on a boat. Doing great and cant wait to see the finished product, please protect your eye pieces and have a sealed mask as that fiberglass dust can be hell.

So you sand, then apply resin, lay on the glass, and apply resin again. You did that three times, right? So you don't have to let each layer dry before you add additional layers?

That’s a serious motor. You should try to put two of them on there! Nice boat!

I am not trying to knock you on your project, it seems like you guys know what you're doing and it is coming out great. I was wondering why not cut the existing core out, replace and fair back to original look (rather than have the bump out now in the bow)? Regardless, looks good, I'm sub'd.

Did you get the old foam out from under the deck?

A one inch paint brush is faster an smooths the smuts better than the popsicle sticks. I've built boats, cars (Avantis) and truck hoods. Resin with fiber glass clippings mix in with 10 cc of catalious. Also using a 1" brush and rollers push the air out better than just rolling, the 1" brush makes a hugh difference in removing air.

Cmon guys. Kick boxes, livewell leanin post,racks for tanks n dive gear! Oh yeah... Some shade would be noice 😂 Happy 4th.

Nice Boat with a Kickass Beast of a Motor.. one of my Hates Glass Fibre and Marine Resin.. hate the Stuff

When did you buy it? I saw a different 22ft mako on fb market place that had a cracked hull for cheap. Is this the same boat?

Haha... I liked how you got after him for not wearing the suit but you were wearing flip flops then no gloves once then got a bunch of fiberglass dust on the front of your legs. So did you get all itchy??? You're definitely right about men not listening though. I rarely do as I'm told too, and I don't wear PPE when I should. Great job and video guys!!! You should definitely open up a boat and body shop. ;-)

Coming right along! Will you be adding some kind of roof / shade?

Cheyenne, that`s a Mockingbird attacking your cat! They attack my lab too!

A little sweat with some elbow grease and your boat will be ship shape again in no time. Good luck with the restoration!

Where do you guys find all these Handyman Women?? There are "wonder women". God Bless you!

That’s gonna be a great boat when you’re finished with it, is it gonna be trailered or sit in the water?

👍👍 missed ya 😊 ☆☆☆☆☆

I hope Taylor knows what he's got with Cheyenne.

Looking good Cheyenne but if you going to go all in fixing her up nice that console would have to go

Good job guys! (:

Have a Blessed 4th of July stay safe and happy.

Once you apply that resin, it's hard to flex the plywood

Delray bch with ya !!!

Should have sanded all gel coat off from underneath, and resin glued the timber to the boat. The way you've done it will last a year, maybe 2 if your lucky. Board will pull away from the boat, fibreglass will crack and will just start rotting out

How did it finish

you should have laid down the smaller pieces first working toward the larger pieces last for max strenth

Why not use chopped strand mat and resin, in lieu of 5200 and screws to hold your core? That way it all dries into one solid piece. 5200 is flexible and the glass around it is much less so, increasing chances of cracking. Also: if anyone tries to cut into that bow later in life, they will get a surprise when they hit a screw. Not hating, just asking.

What part of florida you located?

if it's not Marine Plywood better make sure it's fully encapsulated by resin or it will rot

Taylor is a lucky guy to get to hang with you !! Such a babe !!

What was Taylor about to say at the end?

I must have missed it did you name the boat

you got gel coat powder particulates all over the front lawn , vacuum that stuff up !

Boat = Bust Out Another Thousand

Hey we are doing a restoration too!. i have subbed :)

That's a Mocking Bird, ...State Bird.

I thought the console goes on the bow in salerno??

Yeah you had on a Tyvex suit but I noticed flip flops on your feet?

Any plans for t-tops?

My boat is a 23 foot mako 1977

Someone one posted this on a boat restoration page. Everyone is trashing your work hardcore. They say you have no idea what you are doing.

That was a mockingbird getting the cat because she has a nest nearby !!!

🙃☺️😀😁

First

Except your brother of course

Check out Andy's videos from boat works today, amazing videos to show you how to do anything and everything for boat repair

For Taylor. Hot shower! As hot as you can stand, opens the pores and washes the fiberglass out. Works for me anyway.

That's a mockingbird not a Jay. ;-)

boat name - Jigglesnortnmama

2

Great DIY vid. However, I’m not aware of any law preventing anyone from wearing a skimpy thong bikini while doing it 😁

Hope that’s not structural because there’s absolutely no structural integrity to matt fiberglass. This may be titled “how to fiberglass”….but not how to re-build a boat that’s gonna last.

Omg they have no clue what they are doing they should have just added glass not that 3/4 ply wood. Or maybe close that big hole from the bottom and use that transom cement stuff on the top think it’s called SeaCast

Yeah but you where wearing flip flops, itch itch itch

Maybe a better mask is in your future, breathing all of that dust is bad for you, get the filters that have the two pink filters when they are clogged you will taste the fiberglass.

6 thumbs down. WTF?

Don't you need a place to get out of the sun??

Yall need to cut the grass first 🤣🤣😅

Y’all fucking up that boat lol To reinforce the bow and not have that piece of wood there ugly ass piece of wood you guys could just grind underneath and on top and then put 2 to 3 layers of 3 ounce mat on top and on the bottom.

Wtf