Dreame L10s Ultra water dispensing check 

Detailed showcase of the how the mopping functionality works ! Thanks for this, haven't seen this anywhere else yet.

Excellent Video! Detailed, Short and straight to the point. You deserve a medal sir.

Thank you so much for your video. I just purchased this robot and the mopping function didn’t work. I thought my robot had a default ! I followed your instructions and everything is working wonderfully well. You are a life saver!

My manual on page 9 talks about Base Station Buttons. It really tells you to use it to clean the base bottom. You get the base wet and then use brush or washcloth to clean it. Then it will suck out the dirty water. The grate over it comes out to clean.

Thanks for the great video really helped. For me however, base station is filling with water and the injection whole at the back of the robot has water on it, like in your video. It was as you video with the drops two days ago but since, when I take the pads off the plates have no water on them and there are no drops so I’m not sure what’s going on. From what you say it seems the robot is being filled with water but just not releasing it. Everything else though is great about it from my experience

I have the settings for wetness also on maximum. There is water coming out but not as much as i saw in you video. Could there be anywhere a little chocking and is it possible to clean it ?

We have the same issue. Tried straws but nothing. Will try to find a syringe.

For me, Auto-add detergent is disabled in the app, and I just replace the detergent bottle. Even if I put the old one back is the same. Any idea how to fix this? And check if the detergent is added.

I have the same mop. But my mop pads keep falling off. Any suggestions. It only happens occasionally like every other day

I have water coming out of the two channels and used a straw to pull water from the center nozzle. The mop is now at least leaving enough dampnesss I can detect by touching the floor right behind it, but this is on the highest wetness setting so would expect it to not be bone dry within 30 seconds... It seems it is running water through the mop heads so water is getting to the tank in the unit, so I think I'll run several mopping cycles to see if that can make things run more smoothly. I'm considering giving up on this brand already. With their apparently poor QC, it seems I have a good chance of having the same issue if I request a replacement. I am thinking I'll request a refund instead if I can't get this thing to perform properly.

Thanks for this video. I'm about to buy it. One question though: Is the detergent refillable or you need to replace the whole piece everytime is finished?

i notice after each mop time, the robot disperse dirty water into the dirty water tank but the amount of water is very very little? is it normal? cleaning around is around 70m2

However, one quick question: When doing the deep clean of the base, also the middle dispenser (for the robot) releases some water. First the two bottom left and right dispensers start, but in the last second the middle one as well dispenes some. In your video it does not do this. Is this a defect of my base?

I have done the home button at least 9 times and did the straw method. Water comes out when I suck it but still doesnt dispense water.

my robot only 1 month, but now the wiper not working, anyone know how to fix? or can connect with Dreame support? :(

Hello, after how many minutes or square meters does the water come out?

Is this with the mop settings at maximum wetness?

it's been months ,,,how's Dreame L10S Ultra servicing your vacuuming/mopping needs? any issue?

it's been months ,,,how is the water tank on the robot going? Is there any mole?

I have the L10S pro (no station) and there aren't any water droplets coming out even though i hear the pump. The water tank (has to be filled manually on this model) is full and I also assured that there is not blockade within the pipe of the tank. So the problem seems to be the internal pipes from the tank output to the bottom holes. Anyone had a similar issue and was able to fix? I will try to suck / blow from the bottom holes using a syringe. But first i need to get a syringe. Any tips / help welcome :)

I wonder if drilling the holes slightly will improve water flow🤔

Mine does not leave drips! Customer support has been giving me the run around.

But does it continue dispensing water every time? I just returned a unit because water stopped dispensing after 3-4 minutes every time it ran. I am waiting for the replacement unit to show up. I hope this isn’t a design flaw in all units, but I am becoming less optimistic. Will see what the new one does. Sigh.