Drill, Thread, and Chamfer with 1 Tool

Подписаться 76 тыс.

Просмотров 12 млн

50% 1

The TM Solid TMDR by Vargus Tooling removes the need for pre-drilling holes, saving customers time and money.
These tools also work on components with pre-drilled holes, such as blind holes, through holes, and even semi-finished holes
#mtdcnc #drill #thread
You can also view our videos on our app, download it here:
l.ead.me/bbtzCh
Don't miss out on more CNC videos, subscribe to our channel - ru-vid.com?s...
#cnc #youtube #machine #engineering #youtuber #manufacturing #technology #tech #creativity #mtdcnc

Наука

Опубликовано:

8 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@MTDCNC 9 месяцев назад

This tool is the TM Solid TDMR treadmill from Vargus.. www.vargusuk.co.uk/Vargus/Templates/showpage.asp?DBID=1&LNGID=1&TMID=84&FID=2113

@bob85099 8 месяцев назад

What's the back ground music please 👍

@agungsantoso7604 7 месяцев назад

😅

@eduardomoron9590 7 месяцев назад

@@bob85099 yes i am instrumental version, zach sorgen, the wildcardz

@jayeshnipurte5519 7 месяцев назад

Only for alluminum material used and metric and pt tapping

@dillonfalcomer3107 7 месяцев назад

Whats the song you used called buddy?

@NobodyWhatsoever Год назад

I know it's definitely not the case, but I can't help but imagine someone in their home garage trying to turn the handle on the drill press with one hand and shimmy the sheet steel with the other, then swearing when it doesn't quite work as they imagined.

@BirkinIdk Год назад

lmfaoo "it took him about 3 seconds for each rotation so ill just rotate the plate that fast, should be good"

@chiphill4856 Год назад

CNC

@BirkinIdk Год назад

@@chiphill4856 Ever heard of a joke buddy?

@miketyson1717 Год назад

Who needs a drill press? Just whip out the old handheld black and decker and free hand it

@WaterlordArthur Год назад

@@miketyson1717😂

@cobrasvt347 7 месяцев назад

Would like to see it mill a actual threaded hole without chip fouling. Half holes are easy as the worked material is free to be expelled from the work piece

@hortler 7 месяцев назад

Just glue togheter 2 halves :^)

@iammichaeldavis 7 месяцев назад

@@hortler😂

@deniswdw9352 7 месяцев назад

Я тоже подумал о выходе стружки. Думаю туда нужно подавать воздух.

@TheNefastor 7 месяцев назад

I was just looking for a comment like yours. Would be nice to see the tool not spinning, so we get an idea of what the flutes look like.

@Herbster472 7 месяцев назад

I use these and a similar tool from guhring daily and I had the same thought the first time I saw it. We now use them exclusively. Aluminum to inco 5962. We even use them down to 4-40 in inconel. We can get over 40 holes from a 4-40 in inco 5663. Awesome tools

@Slippindisc Год назад

I could definitely do this with my Ryobi drill hand held for sure

@isaiahh3754 8 месяцев назад

Doubt

@atf8501 7 месяцев назад

Yeah it’s not hard it’s my go to

@winstonleeman8739 7 месяцев назад

When pigs fly 🐖 🦅

@TheCrathes 7 месяцев назад

Would still be three tools, the bit, the drill, and you. Badumtsss...

@anythingbutmyrealname 7 месяцев назад

@alexanderthef8 Год назад

The new guy is still going to chase it out with the wrong tap in assembly.

@gfalcone28 Год назад

😂😂 too good

@eaglewarrior8707 Год назад

Like a ford triton.

@eaglewarrior8707 Год назад

@@user-gg2ty5tk8k And go to the strip club just to collect your thought do you don't take a sledge hammer to the aluminum engine block.

@ricomock2 Год назад

If assembly needs taps, the machine shop isn't doing their job right. Assemble can have an air line and some pipe cleaners lol

@ricomock2 Год назад

@@user-gg2ty5tk8k The Emperor protects.... the parts

@CaptainFalcon92 Год назад

What a time to be a machinist. Whoa.

@petedude2lu3 10 месяцев назад

the tool is easy to make with a lathe and angle grinder the toolpath has been possible since 1850 why is it not common? blame Big Tap and Die

@7ADR 10 месяцев назад

@@petedude2lu3There is def more going on then just "a lathe and a angle grinder" my man.

@Matt_DC 10 месяцев назад

Those Mills have been on the market for over 10 years now... I used to work with the Hitachi/Moldino EDT line when I was a machinist

@mihedas 8 месяцев назад

these also cut hardened steel above 60hrc, its pretty cool

@randybobandy9828 8 месяцев назад

@@petedude2lu3I hope this is sarcasm

@PetesShredder Год назад

I thought these things only existed on the projector screen at a mazak training course 😂

@MTDCNC Год назад

This is a Vargus tool.

@badfellow8422 Год назад

@poultryguy12ableits actually significantly more impressive that they cut it that way but whatever floats your shit talking boat

@AM-dn4lk Год назад

The beauty and joys of CNC.

@MrBlackey666 Год назад

@@yeahright5227and lasers

@willyharris4199 Год назад

@@MTDCNCcould you link the tool please? Very interested

@jordankennedy1494 Год назад

Very cool. For brass and aluminum.

@JaakkoF Год назад

Have seen similar tool dive nicely in to 60 HRC D2 tool steel

@adammiller4879 Год назад

@@JaakkoFwas that video by Adam the machinists by chance? I saw him do this in tool steel with no coolant

@reidb9422 Год назад

I’ve ran them in 17-4 h900 just fine

@jordankennedy1494 Год назад

@@reidb9422 and it plunged just fine huh? Or was the hole already there.

@MK-zj6hz Год назад

No it’s not cool they forgot the coolant

@yummii8259 Год назад

I use a Walter mill to do this in inconel 718. so far it does a couple of hundreds of threads with a 6H tolerance before it needs any compensation or change of tool.

@Chris-cz6hn Год назад

is that good does not seem like much.

@ewan_mclean Год назад

@@Chris-cz6hninconel is not fun to machine

@3rd_Eye_Culture 11 месяцев назад

What’s your tolerance for hole locations though?

@yummii8259 11 месяцев назад

@@3rd_Eye_Culture in millimeters its 0.2 pos tol.

@kphpromecanica2391 10 месяцев назад

Hundreds??? In Inconel??? 🤔

@Dingle-Berries Год назад

I love machining -theres just something satisfying about it

@Nick_B_Bad Год назад

I’ve been doing it over 20 years and the only thing that keeps me doing it is all the side projects I do. Other than that I’m burned out working for someone else.

@mrboleus8240 Год назад

The end with chamfer nailed it.

@EpicManaphyDude Год назад

nah I think it screwed it homedawg

@ohmahfoot3995 Год назад

Both of you nah. Bolted it

@MTDCNC Год назад

A really simple but effective tool.

@SchizoPost 11 месяцев назад

@@ohmahfoot3995Cut it out

@nathanwebb4671 11 месяцев назад

What is the ordering information for this tool?

@BrentBlueAllen Год назад

Finally, my dream of a non-circular threaded hole can be realized

@GrimReaping Год назад

Who cares if your hole is a little egg shaped, or if your bit starts binding from not being able to pass chips out? Atleast you dont have to change from a bit to a tap!

@scottwillis5434 Год назад

Just need a transporter to install the bolt.

@SoulDelSol Год назад

It's moving in a circle wise guy.

@Famouslastplace Год назад

its moving in a circular pattern. Not just side to side.

@crackedemerald4930 Год назад

This guy's ahead in technology

@eliancienthealing6682 11 месяцев назад

Interpolation cutting is nice and easy when you know what you are doing. Have seen many machinist not have a clue as to how to program this type of cutting. The nice thing about this tool is that it is doing the threading as well.

@user-fe2gz7tu8u 7 месяцев назад

Болшэва : диаметра чем сам .. 😅😢😂

@definitelydipper595 10 месяцев назад

Threadmills are the shit. No more broken taps 💪🏻

@geramyballard5293 Год назад

I could watch this all day.

@MTDCNC Год назад

Feel free, plenty of other CNC machining videos on the MTDCNC channel.. Please subscribe.

@DJHeyl Год назад

I had similar tool to mill m10 in heated toolsteal 65hrc was impressive to see and was very stabel prozess, the helix needs to be the same as pitch from the screw. And the tool is left trunning if i remember correctly. And yes no pre drilled hole was needed.

@HopeIsAlliGot Год назад

Wow , thanks for sharing bro. This is the first time I see this working

@slaphappyduplenty2436 10 месяцев назад

Now that takes a steady hand.

@jermaineallen2915 Год назад

Brilliant idea.

@austingeorge6659 Год назад

Wow that's really smart. Not what I was thinking the design would be!

@TheLightningStalker Год назад

"What tooling did you run?" They ask as the bass line from "I Ran" begins to play.

@codiserville593 Год назад

I walked along the avenue

@triggerhappydad65 Год назад

@@codiserville593 "I never thought I'd meet a girl like you uu!" "Meet a girl like you uu!"

@MTDCNC Год назад

Vargus

@LIVe-zm5ez Год назад

Какая прелесть...Мой трудовик сошёл бы с ума, от восторга.

@TheDandyMann Год назад

Saw this at IMTS last year, was cool then, still cool now

@decentraplace Год назад

Billion dollar product

@jonathonwood4088 10 месяцев назад

Who makes it?

@TheDandyMann 10 месяцев назад

@@jonathonwood4088 I don't know who made it sadly

@TheDandyMann 10 месяцев назад

@@jonathonwood4088 It might be Harvey tools that makes it

@decentraplace 10 месяцев назад

Maybe you should start it and pls also create some way to use it without owning a cnc @@jonathonwood4088

@0therun1t21 3 месяца назад

I'm hypnotized, this has perfect music and the bit goes in it's own footsteps without a single tiny hitch.

@Motor-City-Mike 8 месяцев назад

Used them, they're awesome time savers, one tool instead of three, and fit adjustable.

@jamessmith1190 Год назад

How well does it evacuate chips without thru coolant

@quweefs Год назад

Well since half the hole is gone I'd say quite well🤣

@jamessmith1190 Год назад

@@quweefs Awsome handle 🤣 I bet they bust because of the heavy relief needed to helic at that crazy of an angle

@nyckid Год назад

For a demo with half the material ... missing? 😂 You'd still need it for a "real" job...

@YELLTELL Год назад

@@jamessmith1190MY HANDLE IS BETTER!!!!!

@sawdustcrypto3987 Год назад

The bit is hollow and it blows compressed air, and because the bit is only 3/4 the diameter of the hole being cut it just blows out 🤷 (I just made this up)

@OGbqze Год назад

This could save an unbelievable amount of time in the right setting. Saving 2 tool changes, and the issue with breaking taps. Also you only need to buy 1 tool compared to multiple. WIN WIN WIN! Amazing idea!

@batchy97css Год назад

I would say it depends on the size of the thread, and the material. For me it seems quite slow (if smaller than M12 thread). And who knows if the Price of this particular tool isnt more than the 3 normally used tools, and How long it Can last 😊 but very interesting Indeed

@ED-es2qv Год назад

One tool that's twice as complex.

@MF175mp Год назад

It saves time only with a low hole count. For many holes the tool change time doesn't matter any more because you can do the operations for all holes with a single tool change

@MTDCNC Год назад

That is the reason we are starting to see lots of these tools. You also take up less space in the tool changer.

@MF175mp Год назад

@@MTDCNC not to mention if your machine doesn't have a tool changer, it can do more work with one button push.

@foodiegang3 10 месяцев назад

I like the beat you added..

@MistahHeffo Год назад

Well that's cool and all, but it only drilled half a hole.

@davidsnyder2000 6 месяцев назад

Have watched many machining videos but never saw a bit like this on a CNC machine. Pretty cool👍🙂

@SentinalSlice 4 месяца назад

So smooth. So buttery smooth.

@erikkovacs3097 Год назад

Wow. That takes a steady hand. Very impressive.

@georgejackson4790 Год назад

A steady hand?

@zrakodeloco Год назад

@@georgejackson4790 to press the green button =) j.k. maybe he thinks it's a manual? who knows...

@MikeDCWeld Год назад

@@zrakodelocoit could be a joke. I wouldn't know.

@evilarchy1984 7 месяцев назад

Riiiiiiiiight...🤔😒

@AnthonyCelata 3 месяца назад

I think I could do it!

@brighambaker3381 Год назад

With one tool...a precision cnc milling machine that costs a small fortune.

@angieolli5022 7 месяцев назад

What are you on about?

@adelinyoungmark1929 5 месяцев назад

i mean if my whole business model is tapping threads, this is a game changer.

@biofuye 11 месяцев назад

這工藝厲害啊，寫進刀位超燒腦

@user-xe8oi5oq6c Год назад

Incredible! Now imagine series production of replaceable cogwheels, connected to other detail by bolts, screwed between two details!

@johnw7162 Год назад

I would like to see how good it does in solid material, most people are not drilling/ tapping into the edge of material.

@H3lzsn1p3r Год назад

Thread milling is not new…. I have been doing it for years i just did some 1.25-7 threads in 1-1/2 plate a couple of days ago did 50 holes with the same thread mill

@TlD-dg6ug Год назад

@@H3lzsn1p3rYes thread milling is old tech, but I'll bet my whole paycheck you drilled it first. I'd love to see this tool stopped. Either it had through spindle coolant, spiral flute, or its not going to work for chip evacuation. I work with HMC's, and even those are going to struggle unless there is through spindle coolant capability.

@MTDCNC Год назад

We have seen these in solid material many times.

@johnw7162 Год назад

@@MTDCNC Make a video about it. Not only solid material but heat treated steel, or 316 stainless. Lets see a video without drilling a hole in it.

@TlD-dg6ug Год назад

@@MTDCNC you a whole bot, get outta here

@charlesmauro5905 Год назад

The chamfer wasn't that clean, but other than that, Cool tool!

@HaleyHu-s5j 8 дней назад

I'm a new sales manager, just absorbing all the CNC machine knowledge. I have to say it's quite interesting

@MTDCNC 5 дней назад

thanks good luck

@nikki5399 7 месяцев назад

Super cool to see this. Always wondered what the the inside holes of the wobbly arbors looked like.

@MTDCNC 7 месяцев назад

Glad you enjoyed it

@danielhertz7266 Год назад

Now show it without the cutaway

@MTDCNC Год назад

Do you mean a solid block of material?

@JamesValentineKohera Год назад

No, I think he means without space for the chips to get out.

@jordankennedy1494 Год назад

Might work in alumin or brass.

@JaakkoF Год назад

@@JamesValentineKohera There is plenty of space for chips to evacuate, about 1/3-1/2 of the tool diameter.

@zrakodeloco Год назад

@@JaakkoF but there is no helix to pull the chips out. Without spindle thru coolant or some other method of evacuation it will get messy as the depth increases

@ckane510 Год назад

Yep, that’s thread milling.

@nicgili Год назад

But thread milling with center cutting! My thread mill doesn't plunge cut...

@ckane510 Год назад

@@nicgili ok…you can buy them.

@nicgili Год назад

@@ckane510 link? If the are in my budget I totally will.

@MonkeyNoHands Год назад

@@nicgili that same phone/computer in your hand has all the power to do your own research.

@nicgili Год назад

@@MonkeyNoHands Im asking ckane, not you. But thanks anyways.

@wr1ght939 7 месяцев назад

Chills. Literal chills. It’s so unfortunate that Schallt is no longer with us.

@erics1373 Год назад

That’s great for making threads for sizes that don’t exist

@MV-qm9ne Год назад

...or for multiple threads in the same hole. Still, I'd rather drill first.

@OrangeSVTguy Год назад

Having the 2 cutting heads leaves you with only 1 thread pitch. Could removing the 1 so you can mill in different thread sizes.

@airgunningyup 10 месяцев назад

but how would they sell an entire set in that case?

@MrIngorodrigues Год назад

I'll pray for those bearings ! Lol Nice tool

@williammielenz3752 Год назад

This must be the best way to thread and make a hole. No problem for CNC.

@rodenreyes6320 Год назад

This is the fastening system used by Stockton Rush...half a hole, half a thread, half a bolt and wood glue.

@briandougherty5622 Год назад

For those not in the know, this wouldn’t work. They are cutting a cross section all the while drowning the tool in air. You can see chips building up behind the tool before it disengages a cut. It is a neat idea but as a machinist I call BS.

@faleilham8334 Год назад

Drafting in military be like.

@Spy653 10 месяцев назад

I had to use one of these in for something like a blind 2mm hole, it was certainly an interesting thing to see

@barrybrake6325 Год назад

Hell yes I used to work in a shop that sharpened tooling this makes it simple ❤❤

@neplatnyudaj110 Год назад

Awesome tool if you need 1/2 a hole.

@jeanyonsei2318 7 месяцев назад

Back in time when I saw a student use a drill to mill lol.

@MTDCNC 7 месяцев назад

lol

@All_I_can_say_is_Wow 7 месяцев назад

This is awesome. Plus you can double your bolts by cutting them in half lol

@meanman6992 Год назад

This is why cnc is awesome

@goldridder Год назад

Never once needed or wanted this information in my life but still enjoyed the video

@Kids_Scissors 3 месяца назад

I always wondered how threads were drilled. I always thought "surely it doesn't just spin in the middle and bore fast enough that it leaves a corkscrew behind right?" This way makes much more sense

@lasskinn474 2 месяца назад

regular tapping is more like a drill like that

@vincentroberts3793 Год назад

Made me feel wobbly watching that

@Michael-ij6kg Год назад

So many people need to see this

@LovelessRanch 10 месяцев назад

So satisfying!

@romanalbertobedoyalopez9962 Год назад

súper bacano la manera como se ve la perfección con que labora esa broca en el metal

@Bando710 5 месяцев назад

The bevel at the end was chef's kiss.

@Qui-9 10 месяцев назад

That's pretty slick. Better than a tap; Good way to get a blind threaded hole a bolt can reach the bottom of

@VegasViking420 7 месяцев назад

As an HVAC tech, this got me moist. Ordering one now.

@MTDCNC 7 месяцев назад

well done

@Mysucculentchinesemeal 3 месяца назад

That is very satisfactory to watch.

@antoinesaunders2543 7 месяцев назад

Wow. So, these machines eliminate the need for pilot holes in the billet. Me and my tap and die set are jealous.

@MTDCNC 7 месяцев назад

lol, tap and die set ;-)

@life_of_marcopolo 10 месяцев назад

I use to run a Datron cnc and we used something similar on aluminum.

@tianxunliu7479 11 месяцев назад

That's an amazing tool.

@Petrolhead99999 Год назад

If it's got a thru spindle coolant port for chip evacuation, this could be amazing for blind holes... Especially holes where the thread depth is close to the total depth.

@MTDCNC Год назад

We agree.