Drilling a Hole the Width of a Human Hair?

Подписаться 7 млн

Просмотров 171 тыс.

50% 1

In Adam's previous attempts at drilling the smallest bits he could find, he achieved holes the size of three sheets of paper. But with the latest revelations and upgrades he's made to his Dumore drill setup, he takes a stab at drilling a hole with a diameter of .1mm--the thickness one sheet of copy paper or roughly that of a human hair!
Adam's new Dumore Drill: • Adam Savage's New Mini...
Adam's previous tests of his Dumore Drill: • The Smallest Holes Ada...
Shot by Adam Savage and edited by Joey Fameli
Music by Jinglepunks
Subscribe for more videos (and click the bell for notifications): ru-vid.com_c...
Join this channel to support Tested and get access to perks:
/ @tested
Tested and Adam Savage Ts, stickers, (de) merit badges and more: tested-store.com
About Tested: www.tested.com/about
Meet Adam in Person: www.tested.com/events
TikTok: / testedcom
Instagram: / testedcom
Twitter: / testedcom
Facebook: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Intro bumper by Abe Dieckman
Thanks for watching!
#adamsavage #onedaybuilds #machining

Наука

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 635

@tested 18 дней назад

Adam's new Dumore Drill: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FnF3z4AMG1s.html Adam's previous tests of his Dumore Drill: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UCJy1AXMaAE.html

@mikeuk666 18 дней назад

Next watch making with this skill

@ExercisingIngenuity 18 дней назад

@@mikeuk666 Would love to see Adam make a watch!

@wobblysauce 18 дней назад

No outro?

@sumsagro1299 18 дней назад

Hey Adam, did you ever use your swordforge?

@DonariaRegia 17 дней назад

Lubricate your bits, use beeswax or anything but good lord use lubrication. Those tiny bits heat up fast. You'll cut faster and the bits will last much longer. Just push the wax up as the bit is spinning at the slowest speed. That is a jeweler's dream setup!

@jacobzanoni 18 дней назад

"Thats the smallest hole i'm ever gonna drill", sounds exactly like a guy who's about to deep dive on drilling even smaller holes.

@monad_tcp 18 дней назад

drill a hole the size of a 200nm transistor

@MattNolanCustom 18 дней назад

@@monad_tcp can get at least an order of magnitude smaller with a FIB machine

@Mupshot 18 дней назад

100%. But hopefully at that point reason prevails and you remember that lasers are a thing

@MattNolanCustom 18 дней назад

@@Mupshot I've been out of that industry for a while but last I checked, FIB was still preferred for fine detail work, where laser was preferred for rapid material removal, and there were tools that combined the two for the best of both worlds. In that world though, blink and something new has come along, so you may be right!

@tsogobauggi8721 18 дней назад

The smallest holes are the most fun to drill.

@notahotshot 18 дней назад

"That's the smallest hole I'm ever going to drill" has the same energy as the salesman in 1987 telling me "This is more home computer than you'll ever need."

@davidbwa 13 дней назад

1992 - I upgraded my friend's hard drive to a 120 MB drive. We both agreed he would never fill that up. Sometimes we laugh about that memory.

@isatntt 10 дней назад

@@davidbwa what would todays equivalent of that be?

@ZXLMaster 3 дня назад

I don't know what the equivalent would be, but my first computer, in 1982, had one of the larger hard drives at 20 MB. My current Android phone has 8 GB allocated to working memory and the rest of the 256 GB for apps and data. ❤

@samphillips4925 18 дней назад

I cant wait for the video where he shows us why he needs such tiny holes.

@JohnB1163 17 дней назад

My guess would be for fiberoptic lighting in models

@PlatypusVomit 17 дней назад

As a former 'professional fuck around' I can tell you that when you have the capability, you find the need. I used to do industrial maintenance and repair, and when everything was up to date and nothing broken I was allowed to fuck around finding new ways to improve our machines or w/e I felt was worth my time. I guess technical verbiage would be R&D, but I prefer 'professional fuck around'. But yeah...when you work in that kind of environment and get a new tool or capability, you find reasons to use that new tool/capability that are bullshit at first, but you quickly melt it into your arsenal and pretty soon you're primed to whip it out when it's the best tool/technique for something you've been doing a harder way all along or a new problem comes along that it can solve perfectly.

@relishgargler 17 дней назад

That’s what I use them for. Lighting X-Wing and Armada models. Haven’t successfully drilled too many .1mm holes, but I’ve done a few. Surprisingly, my inexpensive drill press isn’t terrible for it. Drilling into soft plastic is a lot easier than a quarter though.

@JohnB1163 17 дней назад

@@relishgargler I use a pin vise for drilling such small holes, sure it's more time consuming but you don't break your drill bits as often as you would with a drill press

@chriskaprys 17 дней назад

maybe just needs a little more space

@jarrodsutterfield3752 18 дней назад

It's funny I just ranted to my wife about how equating things to the width of a human hair irks me as a machinist due to the large variance in hair diameter 😂

@-danR 18 дней назад

Did she question if you were splitting hairs?

@smashyrashy 18 дней назад

In machining, the width of a human hair is gigantic

@mikeuk666 18 дней назад

And the more eleptic the hair strand is the more it curls

@IloveElsaofArendelle 18 дней назад

Why would you need such a tiny hole

@johnmurcott1273 18 дней назад

@@IloveElsaofArendellefor a tiny bolt!

@airdrop1670 18 дней назад

I worked in a very small machine shop and we got a job to drill .030 holes in stainless steel tubing . Only got 3 holes out of one bit . At the time I was using MotorKote oil additive in my cars motor , it is a liquid polyester that would give me 10 % better gas milage so went home got a bottle and back to drilling , when from 3 holes to 28 holes , way better bit life span . Something for you to think about :)

@1pcfred 18 дней назад

Some stainless is an absolute nightmare to machine. All of it's pretty bad but some is extra bad. Some stainless work hardens. So as you're drilling it if you don't feed it'll get really hard. With a small diameter drill you can't exactly lean on the quill. But what you do when it case hardens is you slam the bit down into the bore. Just what works.

@dogwalker666 18 дней назад

Stainless Steel is a nightmare too drill, Even cobalt hole saws blunt after a few holes,

@wobblysauce 18 дней назад

@@1pcfred Yep, all down the the speeds and feeds.

@monad_tcp 18 дней назад

That was really a very small machine shop, lol.

@1pcfred 18 дней назад

@@wobblysauce feeds and speeds are basic essentials for productivity. Those not in the know would be surprised to learn just how critical it can be too. Chip ejection, heat transfer. It's basically black magic. Look how much better this one specific speed works. Goldilocks is real!

@michaelo393 18 дней назад

I was always told by my machining instructor in college that proper setup, speed, feed, and lubricant will get you through any project in life.

@wgm-en2gx 17 дней назад

Kramer (with meat slicer): I've cut slices so thin, I couldn't even see them! Elaine: How'd you know you cut 'em? Kramer: Well, I guess I just assumed.

@Vickie-Bligh 18 дней назад

That is outstanding, Adam. In a way, takes me back to my working days. For 30 years I worked with wires that had a profile of 0.014" or 0.35mm and had to thread them into a catheter with a channel of the same diameter. That was a real challenge. For those wondering, those are the diameters of wires inserted into coronary arteries to unblock them. On occasion, we'd insert a 0.009" or 0.23mm diameter wire. They could be tough to see.

@analogicparadox 17 дней назад

To think those are pretty close to the size of nozzle openings on commercially available 3d printers nowadays

@user-qn8ud9tx6d 18 дней назад

I find it hilarious that Adam is *so* focused that he forgot that he has a lovely Mechanic's Chair (covered with tools); and is instead perching on a milk crate for 90% of this video. Well-done, sir! 😆

@DirtyRoomKnives 18 дней назад

I have no need to drill a hole that small. Yet I really want to be able to drill a hole that small.

@tested 18 дней назад

*nods knowingly*

@tomhorsley6566 18 дней назад

You can make your own 3D printer nozzles now :-).

@SergioEduP 18 дней назад

as someone who measures in the 0.1mm scales semi-frequently I must say that the jump from 0.1mm to 0.4 is fairly noticeable and probably much MUCH easier to drill, also you can make 3D printer nozzles much wider than that, one of my printers is rocking a 1mm nozzle, and since it is 1.75mm filament I want to try an even wider nozzle.

@Warshipmodelsunderway 18 дней назад

First you are drilling very small holes, next you are extracting DNA from mosquitos, and we know where that leads :-)

@johnanon6938 18 дней назад

I'm sure Adam would stop to think if he should. There's no way Adam would get so preoccupied with whether or not he could..... right???

@EricMulek 17 дней назад

Dino DNA!

@Korhanne 17 дней назад

sparing no expense.

@gfdia35 14 дней назад

Life uh uh finds a way

@tomhorsley6566 18 дней назад

Over on the Cutting Edge Engineering channel, I remember one video where Kurtis was terrified he might break a 5mm tap because he never deals with holes that small :-). I guess it is all relative.

@1pcfred 18 дней назад

I just snapped a 6-32 tap. I hadn't broken a tap in quite some time and this one didn't give any indication before it let go. I scrapped the whole piece and made a new one.

@kyfho47 17 дней назад

Just today I drilled and tapped four 2-56 thru 3/16" 304 stainless. I was at peak pucker factor the whole time. Afterwards I finally remembered to breathe. I'd never done anything smaller than an 8-32 before. I was so stoked.

@waynesbutler7834 18 дней назад

Precisely ground micro drills, especially those that are made of tough, nano-grade carbide and are small enough to drill accurately through a single hair follicle, aren’t exactly a dime a dozen. Only a handful of manufacturers even offer them

@robertbackhaus8911 17 дней назад

They actually are rather cheap - although whether they are still that accurate... Basically, they are used in PCB manufacture, and are re-ground many times. When they get too short for the automated machines, they are ground one more time and then sold for people like us to use in machines like this.

@SinisterMD 18 дней назад

This is what I need more of first thing in the morning. This sort of energy and enthusiasm. I feel like it's going to be a good day. Thanks Adam.

@somedayDefect 18 дней назад

We were drilling .005" holes in .085" stainless tubing in our Fadal CNC for high temp, high pressure rupture testing for the steam tubing in our R&D energy storage blocks. This simulated what can happen when bad water chemistry is used in steam boilers. We were absolutely blown away that we accomplished this! Took several tries, but we did it!

@shaunsandow2073 18 дней назад

What is .005” in mm / microns / micrometers ?

@Lessinath 18 дней назад

@@shaunsandow2073 0.127mm

@Budaniel 18 дней назад

The comparison shot of the 1 mm hole drilled next to the .1 mm one really drove home the difference in a very visual, easy-to-understand way, and was awesome to see.

@briansavage932 16 дней назад

Your enthusiasm is contagious.

@jamesl1130 7 дней назад

Thank you for sharing this journey

@andrew8212 17 дней назад

We need a follow up video on how they create such small drill bits, followed by a follow up video on how they make the machines that make such small drill bits. Onwards to the rabbit hole!

@user-rg1lf1im4g 17 дней назад

Adam, thank you for being my inspiration to create. Growing up watching u on mythbusters and now making my own props and building every day and improving is because of u. So thank you for being my inspiration to create.

@bigsmackisback2052 16 дней назад

Ahh I love Adams fascination, excitement and pure joy over the smallest (pun?) details, its very much my speed. A person is either into it the same way or not at all, like if you explain to another person just WHY something is so great, if they dont dig itm you see them glaze over or they light up. All of Adams new toys (tools) videos are great, i wish i had the income and space for half his workshop, but at least i can see how and what all the stuff works and cherry pick "what do i NEED to get the job done, vs what can i get away with using! :)

@THEVILLAIN666 18 дней назад

The swirling metal shavings around the .1mm bit was beautiful

@tomhorsley6566 18 дней назад

World's smallest swarf!

@flyingshutters3438 18 дней назад

@@tomhorsley6566DwarfSwarf

@markday3145 18 дней назад

The tiny bits of brass against the blue marking fluid was just gorgeous. I was watching it spin faster closer to the bit, and slower further away, and found myself thinking it looked like a solar system. Mesmerizing!

@keithflynn5651 17 дней назад

That's genuinely very impressive, well done!

@frenchcreekvalley 17 дней назад

Once we needed holes that were 1.2 thousandths of an inch in diameter, drilled through a piece of stainless steel that was about 5 thou thick and about 3/16" in diameter.. The method was to predrill most of the way through with a larger bit, then switch to the final size to poke the hole the rest of the way through, The application was to squirt a beam of electrons at 20,750 volts (DC) through that hole.. I mention this to point out that, usually, when you need holes that are pretty small,, that they often don't have to be very deep.

@djtreq 15 дней назад

Just wanted to share my appreciation for that subtle but delightful audio match transition from the wheel caster ratcheting to the handclapping bgm during the montage. Much love for little touches like that.

@AquaPeet 18 дней назад

Hey Adam, why didn't you thread one of your hairs through the hole so we could see it come out of the other end? :D

@gcewing 18 дней назад

Now you need to find a pair of go/no-go hairs to prove that your hole is the claimed size.

@Deathsaber435 15 дней назад

Hey Adam and crew I just wanted to stop by and tell you guys that I recently got tested vr and I have to say I’m thoroughly enjoying it I love that when I’m watching it’s like I’m standing right there in the room with Adam or whoever the episode is about and watching them work

@craigadam 3 дня назад

What is impressive is how they make the drill in the first place.

@makingtolearn 17 дней назад

What a lovely little drill cart! I love these videos as they inspire me to make all sorts of little useful modifications for my shop. I also appreciate the really small scale work as I frequently work on very small items- the welding I do uses .005" diameter filler wire.

@zdude030287 17 дней назад

Adam I just want to say thank you for your content and sharing your adventures in experimentation and engineering. You've been an inspiration for me since the first episode of Mythbusters. Never stop being you.

@GentlemensWatchServices 18 дней назад

The workshop's Watchmakers Alcove approves of this video

@Diabolical-Divinity 18 дней назад

Your Glee makes me so happy. Thanks.

@collaborativeclockworks3055 15 дней назад

It was exciting watching you get excited about this!

@mikeuk666 18 дней назад

The most amazing thing is those drill bits... like wow 🤪

@nickloeffler6879 18 дней назад

We did this at work a few weeks ago! Managed on the first try to put a 4 thou hole through 5 thou thick tantalum sheet metal using an old Bridgeport and an inspection microscope. I'm mainly proud of the fact that I didn't break the bit while getting it in and out of the mill.

@mojosbigsticks 18 дней назад

Amazing bit of kit - but it sounds like a dentist!

@shaunsandow2073 18 дней назад

Cool that Adam could drill the 100um hole but how did they make the 100um drill bit?

@hanslain9729 18 дней назад

This boggles my mind as well.

@-danR 18 дней назад

1000µm lathe 😁.

@Krimzy.Productions 18 дней назад

😂

@hanslain9729 18 дней назад

@@-danR but how do they build the lathe! 😁

@shaunsandow2073 18 дней назад

@@hanslain9729 Really small fingers? Watching a watch repair channel the other day boggled my mind about how the perfect teeny parts could be made…maybe there’s a civilisation of Lilliputians under Lake Geneva.

@pbourd 18 дней назад

That’s a 100 micron drill. When I was in the blood analyzer business we had specified Ruby apertures at 50+/-1 micron diameter 40 micron thick (cupped profile) for impedance counting of diluted blood cells (Red, white, & platelets). When we visited the Swiss Jewel manufacturers, they described the process: strung together on an ~1 kilometer long tapered wire spooled at either end. As the machines spun the stacked discs it dabbed diamond dust abrasive on the wire. As the wire moved in and out, it would eventually reach the 50 micron end, upon completion. We developed an optical inspection system on a microscope with a “drawing tube” that we could superimpose our AutoCad- generated template scaled to the 50+/-1 micron image seen in the microscope. Sincerely Peter Bourdelle, Mechanical Engineer, Allentown PA 18102

@Frankie_Holt 18 дней назад

Your cabinetry skill are always improving 🎉

@1pcfred 18 дней назад

Adam's shop fixture woodworking is on point.

@michaeljohnston406 17 дней назад

some years I briefly work in A electronic Assembly lab. I was in charge of repair and maintaining several different machines. one of the machines was called the Lead attach machine . The machine had a wedge that had a hole thru the middle from top to bottom which gold wire was fed to make leads to attach the die to the ceramic case. You had to look through a stero microsope scope to see the wedge. There was a tiny hole on the back side of the wedge where the wire was fed tru. You could not see this hole and you just had to play with it until it came out. The day I mastered this was they day the company I worked for decided they did not need my services anymore!

@bitsRboolean 14 дней назад

Can I say, I really like the cut into the 'um' at ~-3:24 and similar cuts at other places. It's such a good way to ground and humanize while also respecting the audience's time. "This is the sound he made while coming up with an idea, now we're cutting to the idea fleshed out"

@alexcrouse 18 дней назад

That sewing magnet light from Amazon is great. I have two of them stuck to my CNC mill!

@quiteintresting1916 14 дней назад

Imagine living a life where you do what you love... All due respect savage you inspire me

@richardbrobeck2384 17 дней назад

What great drillpress and stand !

@EliotChildress 18 дней назад

Only Adam and this old Tony could make a video about drilling a hole that I would be legit excited to watch the whole thing. But for two totally different reasons 😅

@Markus0021 18 дней назад

Missed the opportunity to say "two HOLEY different reasons" 😇

@nathkrupa3463 17 дней назад

Great video Adam sir 😊

@jtcustomknives 17 дней назад

As amazing as that tiny hole is. Just imagine the machine that makes those tiny drill bits

@user-TJ365 12 дней назад

I love how you were so excited to try your new table that you sat on an apple box because it was in the perfect place for a seat. As opposed to moving it and using your perfectly suitable stool. Well done, sounds like you need to find a project now to make good use of it.

@Attoparsec 13 дней назад

I'm really surprised a Jacob's chuck can center the bit well enough, I would have thought you'd need a collet of some kind!

@andrewdonatelli6953 18 дней назад

Coming up on the next episode of Tested. Adam taps those holes and makes tiny machine screws for them.

@grendel1960a 18 дней назад

amazing, smallest I have drilled was 0.5mm but that was via a flexi shaft from a dremel, and I was drilling stainless steel sheet hand held, I sometimes didnt manage 1 hole and other times I would get 20 before I broke the bit- I used carbide pcb drills (look very much the same as the ones you were using, but I bought about 5 packs at a time.). I do have an optical measure (a microscope with a calibrated platen, commonly used to measure tiny thread pitches by counting 10 teeth and then measuring the offset from the start.) I guess one of those could be pressed into service to measure hole spacing while drilling.(I do have 3)

@petersantoro5323 18 дней назад

This is simply you at your best l loved this build

@DBurgur 18 дней назад

2:47 I watched that knee get a hair away from knocking this antique down and ruining much more than just a super fine drill bit

@ketas 11 дней назад

10:45 literally the reason why using just metric is a good reason

@beautifulsmall 18 дней назад

Nice work. The full 3D vision stereo binocular is critical for soldering tiny smd components so i imagine its the same for these manual operations.

@usairchairmanpfd2889 9 дней назад

Adam I found your drill in an old Dumore Catalog, it's a Dumore series 27 precision micro drill. It's listed in the 1957 catalog and is for sale on eBay now.

@illygah 18 дней назад

Adam, to me, this is a surprising way of setting up the workspace for this tool, but then it suddenly reminded me of the ergonomics of throwing clay on a pottery wheel.....

@GrimResistance 16 дней назад

I 100% have no need at all to drill holes anywhere near that small but now I have the urge to get that exact setup to try it.

@tjmullen 18 дней назад

Fantastic video. I wish the video was longer with Adam’s running thoughts of building the stand.

@cg_justin_5327 17 дней назад

I'm not sure what the practical application could be for a hole that small....but still cool as hell!!

@BillyWilliamson.. 17 дней назад

ADAM IS BACK 😮❤🙌

@KyleRevives 13 дней назад

Under a microscope those toe clamps look like they were handmade on a bench vise with a cordless drill and a scale, yet look like the coolest ones I’ve ever seen from a far 😮 My whole universe was shattered when I learned about the microscopic world, met and got to give my favorite physics teacher a tour of my friends cnc shop and got the nod of approval and couldn’t stop there, now working with and cultivating food with the smallest living things on the planet 😊 I’m still nowhere near where I’d like to be but never would’ve imagined how cool invisible stuff can be, and I owe it to ppl like Adam Savage and my teacher for being here, for being able to do something I love everyday. Now my machines are green and they eat sunshine and co2 and poo out air and delicious fruit, amazing. Thank you again!

@LostButMakingGoodTime 18 дней назад

I thought of something as you began. You have gone on at length about writing instruments, especially for sketching, and your beloved yellow Papermate pencils in particular. So, I have to ask if you have any equally specific desires about the paper you sketch on. I realize something smaller is required for portability because sketching goes wherever you go, and working in the shop or at home can be of any size. But beyond that….. if you would be so kind.

@XelaSnikliw-fg8wu 18 дней назад

Those little wheels are choice!👌

@Mmouse_ 16 дней назад

I fell down the rabbit hole of how those ultra small drill bits are made... Super cool.

@N1RKW 18 дней назад

I'm surprised that the drill uses a Jacobs chuck instead of a collet holder. Must be a very good one!

@Shadoweclipse1386 12 дней назад

This is really cool, but legitimate question: if you need a 10x loupe to see the hole, what processes would you ever need to drill that small for? I honestly can't figure what the use would be.

@Spedley_2142 13 дней назад

Not watched this purely because the question of "how do you make a drill bit the width of a human hair" is far more interesting.

@theoskylab 14 дней назад

It's amazing that thousands of viewers are eagerly watching Adam drill a very small hole and are very excited when he succeeds. I am one of those viewers myself🤣

@ryandury 18 дней назад

"Honey what did you do today?" "You won't believe it! I drilled a 1/10th of a mm hole"" "..."

@1pcfred 18 дней назад

Can we get that in freedom units? I don't speak commie.

@JointerMark 18 дней назад

Metric system was developed by the FRENCH, a republic if I am not mistaken.

@majorlorne6224 18 дней назад

@JointerMark never let facts get in the way of a bad joke. Otherwise, they would know the only reason the USA didn't convert to metric is because the ship with the shipment of metric standard gauges sank in transit.

@ryanatkins5736 18 дней назад

@@majorlorne6224 damn pirates stole our kilogram

@DaveNZ3339 18 дней назад

"Honey what did you do today?" "I watched a guy drill a 1/10th of a mm hole" 🤣

@Bigrignohio 18 дней назад

Amazing that by "hand" such small holes can be drilled. Not sure what they can be used for, but there has to be an application in here somewhere.

@abductedcows4100 18 дней назад

Fantastic build. Question, where can I find those casters he’s using?

@wdolgae 18 дней назад

I work at a shop that manufactures PCBs, the smallest bits we have are .0058" with the largest being .2520". The thing that really amazes me is the controlled depth drilling I have done. How the machine can keep a +/- .001 tolerance in depth surprises me!

@freerangemtb 17 дней назад

Adam's predilection for tiny tables is a pet peeve of mine. I need space to spread out.

@myxfit 18 дней назад

As a daily user of a stereo microscope, I highly recommend getting some eye guards for the eye pieces. It makes it sooooo much nicer to use. You can just lean up and rest your face on the eye guards, and it also blocks out all of the stray light, etc. I actually 3d printed some for my microscope out of some TPU.

@TimmyB1867 14 дней назад

I'm kinda amazed that drill bits that small actually work, without getting jammed up by the stuff you are drilling.

@lonnie6954 17 дней назад

I work with FIBs so it's very impressive to see this done with drilling even though 100um sounds big to me!

@wesleycolvin7158 17 дней назад

For whatever reason, it makes perfect sense that you would do this and want the world to watch.

@roysoutdoorlife 16 дней назад

And to think somebody (or something) made these drill bits in the first place!

@pirobot668beta 18 дней назад

There is an old story about two competing Jewelers...who could drill the smallest hole? Year after year, each craftsman managed to make smaller and smaller holes. The last year of the Contest, one of the Jewelers was puzzled...rather than a test-piece with holes drilled in it, he received one tiny drill-bit....and it was smaller than any he'd ever seen before! He called his friend to see what was going on. "Look at the drill-bit!" was the terse reply. Sure enough, the Jeweler had not only made the the finest drill-bit ever seen, he had drilled a hole through it! "If you want to see the smaller drill, you'll have to visit!"

@grahamstretch6863 18 дней назад

I heard that story, except it was a British drill manufacturer that asked a German drill manufacturer to send them the smallest drill that they had. They sent it back with a hole drilled through it with the message that it was not small enough! 🤷‍♂️ I’m thinking it is just fiction and folklore! 🤣

@anomalousresult 16 дней назад

When I heard the story it was US and Soviets in the cold war.

@grahamstretch6863 15 дней назад

@@anomalousresult 🤣🤣 I wonder how many rehashes there are of this story!

@TWX1138 18 дней назад

I haven't been drilling holes anywhere close to this small, but I have drilled some pretty dang small holes using an old Dayton (Grainger store-brand) drill press that has surprisingly good bearings and surprisingly little runout. My purpose was making pinholes in camera body mount covers (where the modular lenses install), to turn DSLRs into pinhole cameras. First step was the find the center and mount the camera body cap in a vise where it's centered under the drill press, then use an end-mill that was chucked to thin-out the back side of the body cap to something no thicker than a thick sheet of paper, then lastly to swap the end-mill for the very, very small precision drill bit for making the actual pinhole. With a pinhole that small the resulting photos have surprisingly good image quality, particularly on newer cameras with good high-ISO/low-light performance. Plus it doesn't look like you even have a lens mounted so you can take candids that don't attract much attention even from other photographers.

@benchapman5247 18 дней назад

I cant get over a vintage drill with zero runout.

@VonBlade 18 дней назад

It's funny how I watched during lockdown, then kinda fell away (I love Adam, less interested in other people, I get that I'm weird, it's no slight upon them). Anyway, I remember him making the clapper board, and to see that they've decided to never remove the tape from the previous show makes me happy. I'd love to find the episode in which that was decided, or the lore behind it is explained, but it makes me smile every time. KUTGW.

@AAOMorpheus 18 дней назад

That looks so amazing. Seeing the difference in size made me think, one of the things you could make is a micro Hole Gauges, measuring from 1mm down to 0.1mm, no idea what you'd use it for but why not.

@joyl7842 18 дней назад

Someone should make a meme out of that 10:50 look on his face. "what the hell is a meter?" lol

@SteveH701 17 дней назад

1/10 of a mm sounds cool, but calling it a micrometer (µm) sounds even more awesome. Great video as always Adam!

@H2Dwoat 18 дней назад

Hi, I have so many questions 🤓 but here are a few, sorry 😞 f I’ve missed you addressing these in an earlier video. Apart from the satisfaction of doing the difficult, what are the practical reasons/applications for doing this? Perhaps this is an aside but how do they form the holes in a small hypodermic needle? Can you get something of a similar size for CNCing brass? I would like to create small format wood brand.

@TouLagado 17 дней назад

I love the sound it makes when moves the camera, looks like special efects ! I feel like I'm watching Beakman's World for adults =D

@xgozulx 18 дней назад

it so cool how all the chips roll around the bit

@tomhorsley6566 18 дней назад

I noticed there was quite a delay in the digital scope, so that's another reason it wouldn't be very good for this.

@ChriFux 18 дней назад

amazing, that this jacobs-like chuck has low enough runout to not break that drill ^^ i was sure you would have to use collets for work that fine

@drrocketman7794 16 дней назад

My dad used to do this, drilling holes tinier than a human hair with electric discharge machining. I miss my dad sometimes.

@C-M-E 18 дней назад

I must have missed the previous vid, as I was guessing EDM or ultrasonic until Adam showed that catalog. Wha?! Actual drill bits?! 👀

@glennac 18 дней назад

Adam, you’ve got to know that we are dying to see what you’re seeing through the microscope. 😄

@gertjevanpoppel7270 16 дней назад

Very cool to be able to drill a hole that small.... but now I want a video where you show how to sharpen a drill that small 😁...

@mccaine1 18 дней назад

What are those casters with the red levers? I'm looking for something just like that for a project...

@AdamNunnDes 17 дней назад

Adam, you should try drilling a hole in the end of a graphite stick from a mechanical pencil! I remember seeing a Japanese TV show where 2 machinists competed to drill all the down the length of one.