Тёмный

Drip Irrigation with a bucket for trees 

eagle4life69
Подписаться 262
Просмотров 96 тыс.
50% 1

A cheap and easy way to keep your trees watered when you're in the drought or keep forgetting to water your trees.
Parts List
---------------------------
2' - 1/4" Drip Irrigation Tubing $0.10 per foot
1 - 3/4" x 1/4" Compression Fitting $1.59 each
1 - 1/4" Drip Irrigation Tubing Stake $0.11 each
1 - Dripper (I chose 1GPH) $0.42 each
1 - 3/4" Male Adapter $0.40 each
1 - Bucket $3.21 each
1 - Bucket Lid $1.60 each
2 - #18 O-Ring $0.25 each
------------------------
Total: $8.03 After tax
Tools Required
----------------------------
Drill
Scissors
Pipe Cutter
Paddle bit or Hole Saw (just smaller then 3/4")

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 65   
@PlanktoniusRex
@PlanktoniusRex 7 лет назад
Looks good but seems to be a lot of work and expense that is not needed. I use three buckets and each have a 3/64" single hole at the bottom/side. I fill them at the trees, three trees at a time, and just let them drain. At first the pressure of a full bucket causes a rather quick drain but it slows way down in the last half. The dry topsoil can easily drink the first rapid half and when it starts to become saturated the flow naturally slows down as the level drops. I can water my 12 trees in several hours with very limited evaporation loss and the cost was $0 as the buckets were used and free. Another perk is that clogs are easily cleared when using compost tea. I usually put mulch over the water stream to distribute and cover the stream from air for reduced loss. Works like a charm and the trees love it once a week with mulch cover is plenty.
@eagle4life69
@eagle4life69 7 лет назад
You could do this, my intention was to allow for a slow drip in a focused area... also with my Idea, no bugs get in because of the mesh screen placed on the hose
@RugbyNick6
@RugbyNick6 7 лет назад
Same. I drill 2 tiny holes and use the buckets for street trees on my block in DC. I don't want the my neighbors to get weirded out by it so I prefer this faster method. I can go back 45 minutes or an hour later and just pour out anything that's still in the bucket. I've already mulched the trees so there is no obvious runoff.
@abrielonsurez4051
@abrielonsurez4051 7 лет назад
Great video! I was thinking about running a drip system on a timer. I enjoy watering my garden this allows me to water my garden personally, and obtain slow watering which solves my problem with runoff.
@christophergalvin8121
@christophergalvin8121 4 года назад
Nice design. I couldn't get a good seal with the o-rings so I swapped them with neoprene washers which I super glued to bucket.
@eagle4life69
@eagle4life69 4 года назад
Christopher Galvin I think because I made the hole super small, it helped
@esparzaphoto
@esparzaphoto 2 года назад
Thank you so much for sharing this video. I plan to use it for my veggie garden.
@morganclapp5554
@morganclapp5554 7 лет назад
Wouldn't putting a lid on create a counteracting suction preventing the leaking to continue at a certain point
@eagle4life69
@eagle4life69 7 лет назад
morgan clark nope it doesn't prevent it at all
@mmangla5575
@mmangla5575 7 лет назад
Thanks for the information
@mistybe
@mistybe 7 лет назад
Where did you purchase the 3/4" x 1/4" Compression Fitting? I have checked both Lowe's and HomeDepot
@eagle4life69
@eagle4life69 7 лет назад
Misty Belmontez here is the link to Home Depot Your friend has shared a link to a Home Depot product they think you would be interested in seeing. 3/4 in. Hose Thread x 1/4 in. Compression Fitting Item # 789933 It's for drip irrigation
@binhminh417
@binhminh417 3 года назад
Thank you!
@jukujttt5760
@jukujttt5760 9 лет назад
Nice video
@TomCrosman
@TomCrosman 4 года назад
Supposed to water trees near the drip line and not at the trunk. If one has clay soil this will not deep root water them at all. Will at most soak in 6 inches. Deep root is 24-36".
@eagle4life69
@eagle4life69 4 года назад
Tom Crosman you’re correct 5 gallons isn’t going to help anyways for larger trees. But when the summer heat is on and you have younger plants this could be the difference between living and dying
@MariA-nw5qx
@MariA-nw5qx 4 года назад
Instead of drilling a hole in the bucket, can we siphon the water out? I mean, 1. sink one end of the tube in a bucket (weighted down to the bottom, so not to float) 2.attach a dripper at the other end of the tube 3. dunk the entire tube in the bucket (get rid of air inside the tub) 4. grab the dripper end and stick it in the ground. I don't have a drilling tool, so I wondered if a siphoning method might work as it also works on gravity.
@eagle4life69
@eagle4life69 4 года назад
I would have to try, I guess in theory you could do this, just might be more time consuming on refills. Are you looking at just using a bucket to drip but don't want to destroy the bucket so you can use it later?
@MariA-nw5qx
@MariA-nw5qx 4 года назад
@@eagle4life69 Thanks for your reply. I just don't have any power tools and have a track record of botched DIY projects, so I thought if I could just plonk in the tube in the bucket, that'd be just my level of work ;-) Anyway, I read other people's comments and might try making a tiny hole on the bucket to leach the water out.
@JohnnyFYX
@JohnnyFYX 3 года назад
Use a lighter to heat a small finishing nail or a large needle while holding it with pliers or an oven mit. Press the hot nail/needle thru the plastic. Problem solved without power tools.
@MariA-nw5qx
@MariA-nw5qx 3 года назад
@@JohnnyFYX Thanks, I'll give it a go!
@mssavedin92
@mssavedin92 6 лет назад
great idea , well worth the time . We just learned that the most important place to water the fruit trees is at the drip line so thats what we shall be doing. Thankyou
@eagle4life69
@eagle4life69 2 месяца назад
Yeah this was just to help keep my trees alive during summer heat... You could get a trash can and run a round irrigation dripline at the farthest canopy for your trees, generally that's where the roots are stretched too.
@JinxDClown
@JinxDClown 7 лет назад
how long until the water runs out? Interested in using this method for when I go on vacation
@eagle4life69
@eagle4life69 7 лет назад
Jinx D.Clown with the current setup it lasts for about 5 hrs because I'm using a 1 GPH (gallons per hour). Bigger bucket will last longer. Reducing the size of the flow would spread the time out as well.
@w5winston
@w5winston 8 лет назад
I'm gonna do this, thanks. :)
@CariMachet
@CariMachet 2 года назад
Thank you
@rolpaisajismo6721
@rolpaisajismo6721 7 лет назад
Hi, how many trees you own with that system? and how long does it take you to fill those bottles?
@eagle4life69
@eagle4life69 6 лет назад
I have about 7 tree's and it only takes a few minutes to fill the buckets
@Eastbaypisces
@Eastbaypisces 6 лет назад
or u can just drill 3 or 4 1/16 or 5/64 holes in bottom
@eagle4life69
@eagle4life69 5 лет назад
Problem with putting holes instead of drip tips is the drip would not be controlled
@georgeleakos954
@georgeleakos954 5 лет назад
@@eagle4life69 This is a null point as you're using just 5 gallons of water. The ground will get a good soaking whether you use a gallon an hour or 4 gallons per hour emitter. I've tried the exact same method as what you did in that past and it works but at the end I still prefer the simple, tiny holes at the bottom of buckets.
@BigGary79
@BigGary79 5 лет назад
Exactly. This method is big time overkill. The drip is controlled by the size and number of holes.
@larryhalters31
@larryhalters31 6 лет назад
what type of bubbler did you use. I followed this video and had a 1 gph drip irrigation head from Lowe's and didn't get it to flow. It barely dripped at all (wasn't clogged).
@eagle4life69
@eagle4life69 5 лет назад
Interesting it is just a regular 1gph dripper, should be able to put the water out without any issues like mine did. Without seeing what it is doing on yours I am not sure why it wouldn't work. 4 years later and my buckets are still working great
@Halpennp
@Halpennp 4 года назад
Did u have a vacuum from having the lid closed? May have been able to stop the flow
@norcalianglerhugo7113
@norcalianglerhugo7113 4 года назад
What hole saw size was that ?
@eagle4life69
@eagle4life69 4 года назад
3/4" you just want it about the same size as the pipe you're going to screw into it. This will help prevent any additional leaking
@norcalianglerhugo7113
@norcalianglerhugo7113 4 года назад
@@eagle4life69 thanks
@scottoldham7459
@scottoldham7459 2 месяца назад
Drill bit has a size stamped on it. “This is the most important part” and does not give us the information on a how to video. SMH
@eagle4life69
@eagle4life69 2 месяца назад
Just measure for your size pipe. This was 1/2" PVC piping
@homeschool970
@homeschool970 Год назад
How long does it take to empty bucket?
@eagle4life69
@eagle4life69 Год назад
Depends on what tip you put on. In this video I used a 1GPH or 1 Gallon Per Hour so a 5 gallon bucket filled all the way up would take about 5 hours to empty
@BigGary79
@BigGary79 5 лет назад
Overkill. Simply drill a very small hole in the bottom of the bucket and it'll empty slow enough to saturate the area.
@eagle4life69
@eagle4life69 5 лет назад
BigGary79 except this could allow bugs to get into your bucket. Also that is not very controlled as mine is. It also works as you said but I was looking for a constant controlled water
@cooperjack1987
@cooperjack1987 2 года назад
5 ⅛ inch holes drains a 5 gallon bucket in about 10 minutes. That's good enough for me.
@deborhasmith6285
@deborhasmith6285 2 года назад
I thought it was great. I'm going to use it in my garden...it doesn't rain here much in San Diego so I put a pail in my shower for the water...I collect water..
@eagle4life69
@eagle4life69 2 года назад
Collecting Water from anywhere is a great Idea. I live in the Riverside area and we never get rain either
@janicet.2656
@janicet.2656 4 года назад
Great video! Thanks!
@rafapz2347
@rafapz2347 2 года назад
Will this work on a 55 gallon plastic drum?
@eagle4life69
@eagle4life69 2 года назад
Yeah you can make it work, I would recommend a tight seal on the lid to keep bugs out. It would last quite some time
@cbzombiequeen58
@cbzombiequeen58 7 лет назад
I have a question? I am not trying to be smart, I really don't know. Your watering the one spot. what about the rest of the root system. That root system comes out as far as the branches, and its not getting water.
@eagle4life69
@eagle4life69 7 лет назад
Hasn't been an issue but I do move it around everyday
@mssavedin92
@mssavedin92 6 лет назад
i heard the drip line is the most important place to water and fertilize. I would do one of these with 4 drip line hoses attached, awesome idea
@KirkSteen-z1w
@KirkSteen-z1w 3 года назад
Too much work. Just take a 3d nail, heat it red hot and melt one small hole in the side of the bucket, at it's base.
@rjohnsoneod
@rjohnsoneod 4 года назад
I used a 1 GPH but nothing came out in over an hour. The bucket was full and the lid was off. I was testing it before I built 8 more. Do I need a different GPH? I wanted .5 but they were out of them at the time.
@eagle4life69
@eagle4life69 4 года назад
Big John you should get some drips right away the gph is gallons per hour. 5 gallon bucket would last 5 hours. You shouldn’t need the lid on or off, it would end up dripping either way. Double check your line isn’t clogged
@rjohnsoneod
@rjohnsoneod 4 года назад
@@eagle4life69 Yeah, 1 GPH should empty a 5 gal bucket in 5 hrs. Basic math but it just is not working. I left it in the garage overnight with a cup under the dripper. The next morning there was less than a few ounces. I bought a different brand of dripper then you did (all they had in stock). The back of my wrapper says 1 GPH based on 25psi. I contacted the company and they said that they may not work on a gravity feed but they have heard that some people have had some success. I guess I am not one of those people.
@rjohnsoneod
@rjohnsoneod 4 года назад
I am going to find another brand of dripper and go with a 2GPH. it should have less resistance then the 1 GPH or even the .5 GPH. That may allow the gravity feed to work properly. As a temp fix I put a piece of wire around the tubing to restrict the flow down to a small small flow. It takes hours to drain a full bucket.
@janetjackson5525
@janetjackson5525 5 лет назад
We have 20 new trees
@growingthings6232
@growingthings6232 3 года назад
I just built two of these buckets today , love the concept & took it a step further to irrigate a small garden space. Thanks this a helpful idea!
@eagle4life69
@eagle4life69 3 года назад
I am glad I could help
@nyw11
@nyw11 6 лет назад
I like this solution and got a great laugh at that annoying pipe cutter. Cheers!
@eagle4life69
@eagle4life69 6 лет назад
Yep as long as it works I keep using it.. I still have it and it is just as annoying
@eagle4life69
@eagle4life69 5 лет назад
I finally replaced it with something better. Also would have helped to use the right tool for the job, scissors would have been better or heck even a knife
Далее
Brilliant Budget-Friendly Tips for Car Painting!
00:28
Witch changes monster hair color 👻🤣 #shorts
00:51
Making a Deep Pipe Irrigator
5:05
Просмотров 68 тыс.
Tree Watering Solution
5:59
Просмотров 7 тыс.
Best Watering Practices for Newly Planted Trees
14:43
Water Your Plants The EASY Way WITHOUT Drip Irrigation!
14:29
Chapin Living Waters - Super Bucket Kit set up demo
23:05
Bucket Irrigation For Minibed Gardening
7:12
Просмотров 15 тыс.