Drive Belt Tensioner & Idler Pulley Replacement - Mercedes C-Class W204 - How To DIY

Подписаться 125 тыс.

Просмотров 47 тыс.

50% 1

In this video I do a DIY step by step instructional guide on how to replace the serpentine drive belt tensioner and idler pulley in a Mercedes Benz C Class C200 W204 M271 1.8 engine
If I helped ya out and you would like to buy me a drink ko-fi.com/gera...
Thanks to everyone who watches my videos, Likes, Shares and or leaves a comment. I appreciate everyone of you.
Tool options that I recommend and use. www.amazon.co....
➢ For business inquiries Email : gerardburkebusinessinquiries@gmail.com
Disclaimer:
GerardBurke is a qualified motor technician who has completed modules & courses in manual handling and all aspects of workshop safety. These videos are not intended to be used by anyone who is not trained and or qualified to carry them out.
Due to factors beyond the control of GerardBurke, I cannot guarantee against improper use or unauthorized modifications of this information. GerardBurke assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. GerardBurke recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of GerardBurke, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not GerardBurke.
2007 2008 2009 2010 2011
C 180 Kompressor, C 200
Exact vehicle details - MERCEDES-BENZ C200 KOMPRESSOR W204 1.8L M271 DOHC 16v Supercharged MPFI 4cyl 135kW 5sp Auto 4dr Sedan RWD [01/07 - 12/09]
Other Applications that use M271 Engine:
2002 Mercedes-Benz CLK-Class (W209) CLK 200 KOMPRESSOR
2002 Mercedes-Benz C-Class (W203) C 180 KOMPRESSOR, C 200 KOMPRESSOR, C 230 KOMPRESSOR
2002 Mercedes-Benz C-Class Sportcoupé CLC 180 KOMPRESSOR, CLC 200 KOMPRESSOR,
2002 Mercedes-Benz E-Class (W211) E 200 KOMPRESSOR
2004 Mercedes-Benz E-Class (W211) E 200 NGT (bi-fuel - gasoline + natural gas)
2004 Mercedes-Benz SLK-Class (R171) SLK 200 KOMPRESSOR
2005 Mercedes-Benz C-Class KOMPRESSOR gasoline
2007 Mercedes-Benz C-Class (W204) C 180 KOMPRESSOR, C 200 KOMPRESSOR
2008 Mercedes-Benz CLC-Class CLC 180 KOMPRESSOR, CLC 200 KOMPRESSOR
#Mercedes #M271 #W204

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@Talkmen2 4 месяца назад

As a technician this video was helpful for me thank you so much brother...❤

@richardsmith139 5 месяцев назад

Thank you so much for sharing this, I could not find info on how to replace the tensioner anywhere.

@patkelly7999 Год назад

Mighty job Gerard, that was awkward, fair play👍🙏🙂☘

@GerardBurkeBurkesGarage Год назад

It was in a tight spot Pat for sure 👀 thanks for watching 🙌🙌 Much appreciated 👌🙏🙏

@MikeM-tt5fl 8 месяцев назад

Thank You very much. Very good informative video. I am about to do the same job. At least, I know what I am suppose to encounter during the process. Thanks, again.

@GerardBurkeBurkesGarage 8 месяцев назад

Thanks for taking the time to comment 👌🙏

@hydorah Год назад

3:00 T60! That what I needed to know! My set only goes up to T55 and that felt well dodgy, so I stopped and found your vid. Glad I'm not replacing the tensioner! I'm doing cam gears and chain

@ДимитърАндонов-ъ7е 2 месяца назад

in a hurry and if you are careful you can actually get the belt of with T55

@bvaldez21 11 месяцев назад

Appreciate the video, left you a like and subscribe. I'll be replacing my own tensioner and idle pulley. Since I'm down there, are there some other things that would be easy to replace?

@machanickarz4805 Год назад

Hello sir I will replace idler pls tell alternater belt timing or not

@lancegraham7722 2 месяца назад

Is it possible to just replace a noisy pulley if the tensioner itself is fine? Great video btw.

@ДимитърАндонов-ъ7е 2 месяца назад

Yes it's possible and very easy, I changed it, but mine tensioner is worn and doesn't hold tension, the tensioner pulley bearing also was shot

@ashleyabrego9037 Месяц назад

If you are near LA you can have mine, it is basically brand new. Ended up replacing the whole tensioner.

@closertothetruth9209 Год назад

thats the thing isnt it , if your endlessesly replacing parts no point making more work for yourself than necessary. good tip .

@monsterrecordsofficial1765 10 месяцев назад

Hello, I have a question thought you would help me. I have a w203 with the same engine like this one so my issue is on cold start the engine rattles for 2 seconds and then gone. What could possibly be the issue ??? Some says it’s the belt tensioner. Thanks

@meikob Месяц назад

any news what it was?

@tankistae7292 7 месяцев назад

I saw this, tried it, and can't get a hold of anything. I dropped the rack, even disconnected the column and haven't been able to grasp the bolt that secures the tensioner (all this after having to mess with the jack supports and finding out that they are absolutely trash if you don't have the MB jack stand adapter)

@akafede4351 7 месяцев назад

Bro idk about the main problem 😂, but get the adapter 3d printed there is a 3d model around that works wonders, and you can get it dirt cheap. Cheers

@johnnyjones2899 3 месяца назад

Do you need to use anything on the bolt? Like loctite?

@ДимитърАндонов-ъ7е 2 месяца назад

It's good practice to use the blue locktite, but if you forget, probs nothing wrong will happen

@johnnyjones2899 2 месяца назад

@@ДимитърАндонов-ъ7е i did use it. My car really needed a new tensioner and pulleys

@johnnyjones2899 Месяц назад

@@ДимитърАндонов-ъ7е i did use it. Thank you for your knowledge

@DuongNguyenNam-s5m Месяц назад

How about the tools Sir, thank you 8:14

@leewhyramoslock7792 Год назад

Is not easier removing the kompressor intake in order to make more room to remove the tensioner pulley?

@vusindlovu8897 8 месяцев назад

More costly, u have to buy alot of new gaskets.

@ДимитърАндонов-ъ7е 2 месяца назад

@@vusindlovu8897 more time consuming to be honest, the cost goes up about 5-10 usd, u only need 4 intake gaskets and 4 outer o-rings for the fuel injectors. i tried this method (showed on the video) on my w203, but there isn't any room for me to go to this bolt... in the meantime while you drop the supercharger, u can replace your pcv valve (notorious problem) and top off your supercharger oil, or you have spare time you can disassembly it and grease the needle bearings and replace the pulley spring of the supercharger and essentially rebuild it to close to new condition