DS708 on a 2007 Audi TT Cabrio Auto Roof Repair 

Perfect, worked perfectly for mine after replacing the flap motor. The test routine only works once the test programme is started. It wasn't quite as I expected with different functions working in between like locking unlocking and some moves taking longer than others. But one open and one closing sequence worked. Codes as the video and all good!

You may want to remove the flap servos and give them a good clean first. They are notorious for grease migrating from the gears to the electronics and causing an implausible signal. Typical fault codes for this are 02000, 03246 and 03247. Removing and cleaning the flap servo's is very easy to do. If you do this as a preventative measure before the top starts to act up, you won't have to perform an Adaptation. But if you get a fault, then you will need a VCDS to do it. Unfortunately the OBD-dongle devices don't have this Adaptation feature. You can read more about it here - www.ttforum.co.uk/forum/viewtopic.php?f=43&t=1786641

Thanks for this useful video. One thing I hadn't figured out and which sorted my hood not raising was the position of the screw on top of the hydraulic pump. For me, this needed to be turned fully clockwise until I could turn it no further. The hood then started going up and down :) Did not find anywhere mentioned that the screw must be turned until it stops turning.

I purchased the Ross-Tech VCDS unit described in the Video. About $200, but WAY less than a visit to my local Audi dealer. Followed along with the description in the Video and the roof now works! The only thing not described in the video is "cycle through the roof" means push or pull on the normal roof electric switch in the car. I think a cycle is probably returning it all the way to where you started (either open or closed). Saved me $$ and the time/hassle of dropping ti off at the Dealer - where in the past they replaced the sensor for about $1000 worth of work. Hopefully it last another few years before I need to initialize again!

This is great info! The top on my 2008 TT stopped working after I went over a bump while I was operating the top - do you happen to know how to access the mechanical bits of the roof, or know where I can find that information? Besides the expense of taking it to the dealer, the nearest dealer is about 90 miles away! Either way, thanks for posting this video.

Hi, my TT hood is stuck down and won’t come up? You say go through a full cycle, but I can’t because it won’t come up. The windows drop and the flaps come up. But then nothing. Will the adaptation cycle bring the hood up? Any help is much appreciated.

maybe if you put in the Vin number instead of model number ? . Notify Autel of the problem , maybe they will give you a discount on new updated program version

Hi,i want to replace my instrument cluster on my audi a7,can you code an used one?thanks

not bad

Sorry but please use your hand in some hardware stuff I can't understand computer and software stuff we are not programming

AIM FOR THE REVISED MOTOR FOR THE FLAPS THA END WITH A..BUT I A =M SURE U KNOW BY KNOW..