DTF HOSONSOFT PrintEXP Part 1 

Most machines not, due to the cap structure.

I'm getting blue instead of black. How do you solve that problem? I think there is a problem with Honosoft software.

easy, do a nozzle test then you can see

did you find out?

algin no, just high position from capping

check printhead nozzle test result, most likley nozzle blocked

I'm facing same issue. Did you find any solution for this?

@@AchievementMatters I have this same issue with banding in large solid colors, Its more like a fade for example.... pink to almost white and back to pink... But over and over at equal intervals with perfect printing in between. My nozzle tests are perfect, new dampers and print heads that print perfect when the design isn't a solid color. I have tried changing waveform, eclosion settings, 6 pass and 12 pass printing, omnidirectional vs bu directional all with no luck. Do you have any idea how to resolve it or what I could try? Printer is OKAI dual i3200.

@@woodwarriorworkshop9919 I cannot helo if its not our machines. If nozzle test is fine, our techncian will change some soften settings on PrintEXP to get rid of the banding.

I guess your motherboard is not a genuine version

@@AchievementMatters i have the same Problem but at first was all alright. Now like about 2 Month later i have the watermarks means something like Demo. And now i dont know how to fix this. I cant Print now. Can you help me?

I guess you are taling about different software. No 016004 in PritnEXP.

Pls were you able to solve it... And how please help

Under adjust then headspace then vertical. Moving the number higher moves the white towards the printer. Moving the number down moves the wig it’s start point away from the printer.

would you happen to know how to move the white from left to right? @@msmusick84

I really don't like RU-vid allow everyone from every corner of the earth to reply. Ya, it might be a nightmare for you. But for our clients, its a useful tool.