Everything You need to know about DTF to get started | My New DTF Printer & why I changed it!

10 Secrets To Successful Sublimation For Beginners #sublimation

Я в детстве с маминым дорогим шампунем:🧼

АНАЛИЗЫ (смешное видео, поржать, юмор, прикол, смех)

Я БОЛЬШЕ НЕ ЕГОР КРИД ! У Егора Крида забрали имя ?

Когда друг зашел домой за водой

DTF PRINTER UPDATE | DTF PRINTER MAINTENANCE | DO I STILL LOVE IT?

Crafting with Delonda

Подписаться 169 тыс.

Просмотров 13 тыс.

50% 1

Видео Поделиться Скачать Добавить в

DTF PRINTER UPDATE | DTF PRINTER MAINTENANCE | DO I STILL LOVE IT?
Hello everyone! You have been asking for it and I am going to give it to you! I am going to share all of the nitty gritty details about my DTF Printer. I am sure that I am not doing everything that I am supposed to do; but I am maintaining the printer in a way that works best for me!
In this DTF Printer Update, I am sharing about what I like, what I don't like, and the two things that annoy me the most. I hope you find this tutorial helpful.
Here are the other resources used in this tutorial:
✅DSV DTF Printer: amzn.to/3XFH0cN
✅Welacer Film: amzn.to/3NF7lnE
✅Welacer DTF Powder: amzn.to/3CLsfeB
✅Cubi Cubi Adjustable Table Brown: amzn.to/3Jt56S6
If you enjoyed this video, you might also enjoy of some these other playlists that are dedicated to Cricut Beginners in other areas:
1. Infusible Ink Playlist - • INFUSIBLE INK
2. Cricut Design Space Tips and Tricks - • TIPS AND TRICKS
3. Cricut for Beginners - • CRICUT FOR BEGINNERS
4. Print then Cut Projects - • ⭐PRINT THEN CUT⭐
The links below are affiliate links and I will earn a small commission from your purchase, at no additional cost to you.
✅Shop my Amazon Storefront: www.amazon.com/...
✅Shop from Heat Transfer Warehouse: www.heattransf...
✅Shop from 143vinyl.com: www.143vinyl.c...
✅Shop from Atlanta Vinyl: atlantavinylst...
✅Get started with an All Access Plan from Creative Fabrica: www.creativefa...
✅Try Design Bundles FREE for 30 days: fontbundles.ne...
⭐Come and get social with me.⭐
Links to all of my socials: linktr.ee/craf...
My Website - craftingwithdelonda.com
Instagram - / craftingwithdelonda
Facebook - / 272801197679910
Pinterest - pin.it/7tLlJrb
Creative Fabrica -craftingwithde...
Thank you so much watching!
Bye
#dtfprinterupdate #dtfprintermaintenance #directofilm

Опубликовано:

17 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 153

@tracynewton-clayton7252 Год назад

Great job in demonstrating. There were lots of information given. Thank you so very much. ❤

@CraftingwithDelonda Год назад

Glad it was helpful!

@days3190 9 месяцев назад

Delonda, I love your tutorials. You're so direct and thorough. I purchased this DTF today and I'm even more to receive it. Thank you. Dallas, TX

@CraftingwithDelonda 9 месяцев назад

That's awesome! This is a great DTF printer and I have enjoyed learning about how to maintain it.

@gwendolyncarter6152 Год назад

You have a lot of patience I could not do this every time just too much trouble.

@CraftingwithDelonda Год назад

I hear ya! Like I mentioned a few times, I don't do all of this stuff every time. I demonstrated how to troubleshoot and do maintenance as needed.

@jennieburt291 Год назад

Girl, you are a genius! The tips in this video and your honesty are worth watching everytime. Looks like this printer turns out a very nice transfer too. Everyone doing shirts should subscribe to your channel. 😍

@CraftingwithDelonda 10 месяцев назад

Thank you so much!

@tammyharris3248 Год назад

Dalonda- thank you so so much. I finally figured out what was wrong with mine. The tube was stopped up at the box that holds the white ink on top of the print head. I had to take a needed to it to clear the blockage. It came that way… 🤦🏽‍♀️ I truly appreciate your videos. They have been so helpful.

@CraftingwithDelonda Год назад

Glad I could help!

9 месяцев назад

Thank you for sharing! You have helped me tremendously to get started with my dtf printer.

@dianachau7857 Год назад

Thank you for showing how to clean the machine. Next request, please show us how you set up to connect all the machines in your office. My breaker switch off when i had only 16x20 heat press and a 24 in tv on in the room. I am not an electrician. I would love to see how people set up with all their machines. Thank you

@CraftingwithDelonda Год назад

I struggle with that because I have so many machines and heat presses. I actually have more than 10 heat presses and if I turn on more than one at a time, my electricity with power off in my craft room. I am in the process of upgrading and I will keep you posted on that.

@ELEM_Apparel 11 месяцев назад

I had a second breaker panel and 6 sockets installed just for my business. The heat presses pulls a lot of amps.

@marlettaengland1513 9 месяцев назад

If you print multiple transfers during one sitting would you do a print head cleaning and nozzle check with each print or just at the start of your project of printing multiple items.

@pennymathews6818 Год назад

Thanks for all the great information about your printer. If I had a dedicated crafting business this would be very helpful in making a decision

@CraftingwithDelonda Год назад

Glad it was helpful!

@ckphil226 Год назад

Hello I have the same machine in the instructions of the video of install software and parameters at the 00.52 it will instruct you how make an exception for the program to run without the security overriding it there is no sound and you have to pay close attention but it's there, I felt the same as you, have a good day!!😊

@CraftingwithDelonda Год назад

Thank you ❤️

@kelvinnoble7589 8 месяцев назад

Hello how you doing i be watching your video i just got my L1800 printer i wanted to know how many cords supposed to come with the printer < also how do i plug in the printer

@lizalmo3073 9 месяцев назад

First let me say, i love your videos they are so detailed. Can you do a video creating a design and transferring to rip using white...when I create a design that uses white after pressing it is almost transparent. I have wasted almost an entire ink bottle trying to print white letters, for a black hoodie for my daughter. Thank you

@CraftingwithDelonda 9 месяцев назад

Thank you and yes

@Ayyyeeetina Год назад

Got my notifications on! Was waiting for this update 🤩🤩🤩

@CraftingwithDelonda Год назад

Thank you ❤️

@AbbasCloset 4 месяца назад

Hi! I made the decision to purchase this printer and so far it’s pretty awesome! However, I’m having a challenge with my white ink outlining my image/letters. Customer service is up and down and there isn’t a designated group via social media to ask your DSV DTF Printer questions. Hope this reaches who it needs to reach 😅

@CraftingwithDelonda 4 месяца назад

Hi there, you didn't ask a question, but the problem with the white ink is definitely a customer service thing.

@AbbasCloset 4 месяца назад

@@CraftingwithDelonda Thank you for responding. Totally forgot the question 😅- Do you know of any social media groups that help those who have DSV DTF Printer?

@janetjordan6208 Год назад

Thanks for sharing with us. Love your channel.

@CraftingwithDelonda Год назад

You are so welcome!

@peternorthfield1454 Год назад

Have been on the fence about getting a DTF printer, your videos are very in depth and informative so thank you, you have made the decision easier for me. Loving the video’s

@CraftingwithDelonda Год назад

Glad it was helpful!

@yvettemorrison6896 8 месяцев назад

Thanks for teaching us what you know i love learning from you , just got mine can you tell me what other laptop you would recommend. Thanks again.

@CraftingwithDelonda 8 месяцев назад

I only have a Lenovo. The brand doesn't matter. Just make sure you are using a Window based operating system.

@19beckeann 8 месяцев назад

I hope when we I try to print that I have my security off. It was hard to figure it out. Lol

@shielacushenbery5635 Год назад

Delonda, you can add 'Master Napper' to your list of talents!🤣 Thanks for the awesome tutorial. FYI- you were right the first time....CC's & ML's are the same.

@CraftingwithDelonda Год назад

🤣🤣🤣🤣🤣🤣🤣 Thank you so much ❤️ I just learned something new 😌 ✨️

@ELEM_Apparel 11 месяцев назад

This reminded me of why I got out of DTF. The maintenance is nuts. The Chinese printers are the best though.

@CraftingwithDelonda 10 месяцев назад

Understandable

@marlettaengland1513 9 месяцев назад

Great video. I’m thinking about getting this printer but I would use it about six months out of the year. How could one handle the required maintenance if you’re out of town for several days or weeks.

@stevenangiekissinger5462 8 месяцев назад

I just got this same printer. Mine has the roll. Can you walk me through getting my colors right and it to print right? I’d sure appreciate ya! I’m having a time with it lol

@CraftingwithDelonda 8 месяцев назад

Hi there, I had to contact the company and have them walk me through it and I still call them as needed. All of their contact info is on the Amazon page where you placed your order. They are very helpful and they will connect to your computer.

@MD-yw8lq Год назад

Wow! Great video! Thank you so much!🙂👍

@CraftingwithDelonda 10 месяцев назад

Glad you liked it!

@AngelaDiamond-qi8ol 7 месяцев назад

I you give a lot of great information! I do have one question though. I own this printer and am having trouble drawing ink through the waste tank. I did not use it for a couple of weeks, and I think the waste tank line is clogged. Any suggestions? Thank you

@CraftingwithDelonda 7 месяцев назад

I am honestly in the same boat. I haven't used mine in months and I actually had to order a new print head 😭😭

@marthaalvarez214 Год назад

Good video Delonda. Would love to have a DTF printer someday. Love your channel.❤

@CraftingwithDelonda Год назад

Thank you ❤️

@shannaauten6831 11 месяцев назад

Fellow Texan here, howdy! I love your videos!!! I'm curious if you've had to buy more ink yet, and if so, what brand did you get? Thanks!

@CraftingwithDelonda 10 месяцев назад

I'm so sorry I'm just seeing this. I haven't purchased more ink yet, but when I do it will be their DSV brand.

@MarcosCorrea-g5c 7 месяцев назад

Hi im a new and i want to purchase a dtf machine witch one would be a good one to buy

@trappyadvice2492 4 месяца назад

What's the best printing technology to print face or picture of persons onto a T-shirt?

@nikittyworkshop Год назад

Hi Delonda, thanks for the video. Becareful leaving the back button on. I did that and I had to replace my white ink circulating pump after a few months because it failed and kept pumping white ink all over my desk. Granted I have a printer from a different manufacturer.

@CraftingwithDelonda Год назад

Thanks for the info!

@ChocolateCoaDrip 10 месяцев назад

😂 Hello hi great channel amazing Video. Just subscribed 🎉🎉🎉🎉

@CraftingwithDelonda 10 месяцев назад

Thanks for subbing!

@paranormalspirittrackers5745 9 месяцев назад

I bought one, but I’m having problems trying to use the program. Mine called Atusums Rip. Is yours the same?

@CraftingwithDelonda 9 месяцев назад

My software has a different name. You can contact them. Their contact info is on Amazon where you made your purchase. They have a whatsapp number and an email address.

@rosadearborne7713 Год назад

Hey ma'am, which do you prefer, the dtf of the sublimation/ dtf hack???

@CraftingwithDelonda Год назад

Oh, that's tough! If you don't have a DTF printer, the hack is fine. The only thing with the hack is that you won't have any white ink in the image. Also, it is hard to achieve good results with dark fabric.

@rosadearborne7713 Год назад

Oh, ok thanks

@TinasCN0_0 Год назад

So thankful for these DTF videos! You have gotten me through some bumps along the way with my DTF journey. Especially with the time zone difference for customer service. So again thank you 🙏. Do you know if you can change the measurement settings for the grid on the rip software ? Instead of mm it would be so much easier for me to use inches 🤭. By the way you are the reason I decided to go with this Brand of printer (I got the blue one). I was going with pro-colored at first but instead decided to go with DSV. ❤

@CraftingwithDelonda Год назад

Thank you ❤️ Yes, you can change the settings by clicking file, unit, and change it there.

@TinasCN0_0 Год назад

Thank you so much for your response ❤.

@jeankollar1568 5 месяцев назад

Hi! How do you use the heat press instead of the oven?

@CraftingwithDelonda 5 месяцев назад

I use my HTVRONT and let it sit on the plate with the it open.

@tiffanytaylor8136 Год назад

My dsv printer is not feeding the film, can't get in contact with seller which I brought through Amazon, do you have a number? Is your main roller a full circle? Mine is not for the film feed

@CraftingwithDelonda Год назад

Oh no! Mine is a sheet feeder, I don't have one with a roller. I contact them through whatsapp and the information is on their Amazon page.

@thorobred80 Месяц назад

I have the clamp heat press. Can you please provide more details about the curing stage? and no I dont need to know "How does it do in the wash" (squinty voice)😂🤣

@CraftingwithDelonda Месяц назад

🤣🤣🤣🤣🤣🤣 Clamp heat press??

@CraftingwithDelonda Месяц назад

During the curing, I just let the image sit under the heat until the powder is melted.

@vanessaburns5723 5 месяцев назад

Can a you use 13" paper with this printer or even add a roll feeder to it

@CraftingwithDelonda 5 месяцев назад

You can use 13 inch paper; but you cannot add a roll feeder as far as I know.

@dwilliams247 Год назад

👍🏼very informative and tips

@CraftingwithDelonda Год назад

Glad it was helpful!

@hbk9inek183 11 месяцев назад

Hello Delonda, is there a way to print 2 different designs at once on the same sheet of film

@CraftingwithDelonda 11 месяцев назад

I think the only way to do that is to put the two images together in a different program.

@lisaanderson6528 Год назад

I do have a question which heat press would you recommend?

@CraftingwithDelonda Год назад

My suggestion is to get the biggest one you can afford. 15 x 15 is perfect in my opinion.

@queenroyalty3907 Год назад

I have this same machine and my white does not show up white on my dark shirts. I have used the black powder they suggested and that was a bad idea because it made it look grey. Whatever color shirt i am using it will come out that color. Such as, red will make it look pink and a purple shirt will make it look lavender. I have my white turned up to 100% and the colors are on 80 like they told me but nothing is working. Can you help or do you have an answer for me...Pleeeeeeeease!!!

@timothymcbride8471 7 месяцев назад

Same thing was happened with my mashine,I have been contacting through What’s App and they gave me some advice,but it doesn’t work,after then they do by themselves through “any desk”and now it’s working pretty good,I’m very thankful to customer service.

@garylindsey3931 9 месяцев назад

Try to unclog the white damper it is unable to pull any white out of one of the damper. DSV L1800 dtf printer Any help please.

@CraftingwithDelonda 9 месяцев назад

You can also contact them through whatsapp

@jackiewoolard4359 Год назад

I am waiting too..I had ordered a DTF from Procolored and then I found out all the daily..weekly and monthly maintainance that was required and cancelled my order before it was shipped.

@CraftingwithDelonda Год назад

I heard that!

@JenLapent 10 месяцев назад

Delonda! Can you show me a design that has a light color in it and a dark and show me the results compared to actual? im having a hard time with colors! If there's a dark orange and a light orange only one color comes out right! if I change settings to fix it it fixes one but not the other. Im going insane. Also what ink and pet film you use as well as if there are any icc profiles for them? thank you so much!

@CraftingwithDelonda 10 месяцев назад

Oh no! I am sorry you having a problem with the colors. I showed my color settings in one of the set up tutorials. Let me see if I can find the link.

@CraftingwithDelonda 10 месяцев назад

My settings are here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ri_6qIUNvmU.html

@brendalatson9265 Год назад

Very informative

@CraftingwithDelonda Год назад

Glad it was helpful!

@jessiegibson9023 Год назад

Good video thanks ❤

@CraftingwithDelonda Год назад

You're welcome 😊

@christy2370 Год назад

Hey, Do you think it’s not worth buying the oven ?

@CraftingwithDelonda Год назад

If you have a place to put it and you can use it at the same time as your heat press, yes. Otherwise, I would say no.

@christy2370 Год назад

Thank you 🙏

@LRamey Год назад

Good moody you have a website that you sell items on?

@CraftingwithDelonda Год назад

I don't do any sales.

@doreenmadison9893 Год назад

Hi Delonda , Do you have to have a separate computer for this printer?

@CraftingwithDelonda Год назад

You can use the computer for other things, I just don't. You just can't use a Mac.

@doreenmadison9893 Год назад

@@CraftingwithDelonda Thank you. I’m jus a crafter like yourself and don’t sell things so I might not use it a lot but it’s way cheaper then the white toner that I like.

@TheNosdivad 10 месяцев назад

Whats the name of the printer and the company you bought it from in China?

@CraftingwithDelonda 10 месяцев назад

Everything is linked below the video. Click the linkbto get the information.

@edithfowler4956 Год назад

When you do message the customer service do they get back you? Understanding the time difference .

@CraftingwithDelonda Год назад

I haven't left a message. I normally wait until midnight and then reach out to them. Are you in my Facebook group?

@edithfowler4956 Год назад

@@CraftingwithDelonda no I am not. Is it under the same name?

@amandawitherspoon9127 Месяц назад

I'm experiencing some issues with this printer now and need technical support information

@CraftingwithDelonda Месяц назад

Look on the Amazon page under your order and you can find their contact information.

@Lathift 11 месяцев назад

Your printer ink is UV ink or textile ink?

@CraftingwithDelonda 11 месяцев назад

Great question...it is the DTF ink that came with the printer.

@christy2370 Год назад

What temperature should I put my heat press to cure ?

@CraftingwithDelonda Год назад

I normally use 350 degrees fahrenheit

@teresajoshua6963 Год назад

What brand of ink will you be using when it's time to refill your ink?

@CraftingwithDelonda Год назад

I'm going to use theirs. It's called DSV.

@irmaortiz2928 Год назад

Hi Delonda and crafty friends! 😊❤️

@CraftingwithDelonda Год назад

Hi there!

@jennifercampbell6713 Год назад

I have this printer has been a nightmare since I owned it. I don’t like that u can’t actually create custom images on the dtg rip program

@CraftingwithDelonda Год назад

Oh no! I'm sorry you feel that way. Think about this way, there really isn't a printer that has software that allows you to create images (except Sawgrass) to my knowledge. I have 4 other printers and I don't create images in the printer software. I usually create in Canva or download images from Creative Fabrica.

@jennifercampbell6713 Год назад

I been watching a lot of videos about canva and plan on downloading tomorrow

@emilygraham9008 Год назад

I feel like I actually started selling shirts using DTF, it would be cheaper after the initial investment than buying DTF prints, waiting on shipping etc. Depending on where you buy them, it can cost about $15 a print.

@CraftingwithDelonda Год назад

Exactly!! If you are into sales, you don't have to pay someone for transfers.

@nichelelindsey3165 10 месяцев назад

Am I able to ask you a question about maintenance

@CraftingwithDelonda 10 месяцев назад

Yes

@jessicahuddleston4498 11 месяцев назад

What kind of DTF ink are you using or will be using in your DTF printer? 😊

@CraftingwithDelonda 11 месяцев назад

I use the ink that came with it. It's the DSV brand.

@madamegina5778 Год назад

I'm new. Are you in Atlanta?

@CraftingwithDelonda Год назад

I am in Houston. Welcome.

@Friendofsinners777 5 месяцев назад

Do you still recommend this printer?

@CraftingwithDelonda 5 месяцев назад

Only if you have a small business and you will use it every single day. Otherwise, I recommend purchasing DTF transfers.

@magsbain8143 3 месяца назад

My printing is patchy plz help ?

@ik06052009 5 месяцев назад

Hello, would you be willing to do some training by video? I'm willing to pay for the training.

@CraftingwithDelonda 5 месяцев назад

Hi there, I don't offer that kind of support.

@garylindsey3931 9 месяцев назад

Do you have the number to call for DSV l1800 printer

@CraftingwithDelonda 9 месяцев назад

It's on the Amazon website under the contact info.

@christy2370 Год назад

I just purchased this printer. Now going in two weeks and still doesn’t work. Rep claims motherboard was damaged during shipping. Then sent me another one. 2 nd one doesn’t work. Im waiting for a third one. Hope it works because I know it’s going to be a problem to return. Total was $4,000. Im in tears every night not being able to use this printer. Waiting for 3rd motherboard 😢

@CraftingwithDelonda 10 месяцев назад

Oh no. I'm so sorry.

@mojoTx 7 месяцев назад

What do I do when I done everything and it still won’t. Print

@CraftingwithDelonda 7 месяцев назад

Contact them. I shared their contact info.

@702naturalbeauty Год назад

❤❤❤❤❤❤❤❤

@CraftingwithDelonda Год назад

Thank you

@lindapotras7252 10 месяцев назад

why do I need a dedicated printer ??

@CraftingwithDelonda 10 месяцев назад

You mean computer? You don't have to have a dedicated computer, that's just what I chose to do since I had to turn off the security.

@lindapotras7252 10 месяцев назад

yes meant printer thanks, and is 8 gbs enough? Linda

@michelleplatt8392 Год назад

👍🏼🤗❤️

@CraftingwithDelonda Год назад

❤️❤️❤️

@NessysPlace Год назад

👋🏽

@CraftingwithDelonda Год назад

Hi there.

@marklola12 Год назад

Too much work unless a bigger business best to just order the dtf prints works out cheaper and better

@CraftingwithDelonda Год назад

Thank you for sharing your opinion.

@pennymathews6818 Год назад

That’s what I was thinking 🤔

@pennymathews6818 Год назад

You can also do your own DTF with your inkjet printer and the powder which is ideal for personal use

@emilygraham9008 Год назад

@@pennymathews6818 you would need a sublimation printer for the DTF to be permanent, ink jet comes off in the washer

@BrightSolCreations Год назад

That seems like so much work for that $2500+ machine😢

@CraftingwithDelonda Год назад

It could seem like that because I'm showing everything in one video.

Далее

Everything You need to know about DTF to get started | My New DTF Printer & why I changed it!

30:46

Everything You need to know about DTF to get started | My New DTF Printer & why I changed it!

Просмотров 29 тыс.

10 Secrets To Successful Sublimation For Beginners #sublimation

25:12

10 Secrets To Successful Sublimation For Beginners #sublimation

Просмотров 14 тыс.

Я в детстве с маминым дорогим шампунем:🧼

00:17

Я в детстве с маминым дорогим шампунем:🧼

Просмотров 2 млн

АНАЛИЗЫ (смешное видео, поржать, юмор, прикол, смех)

00:59

АНАЛИЗЫ (смешное видео, поржать, юмор, прикол, смех)

Просмотров 1,5 млн

Я БОЛЬШЕ НЕ ЕГОР КРИД ! У Егора Крида забрали имя ?

02:57

Я БОЛЬШЕ НЕ ЕГОР КРИД ! У Егора Крида забрали имя ?

Просмотров 213 тыс.

Когда друг зашел домой за водой

00:46

Когда друг зашел домой за водой

Просмотров 88 тыс.

DTF PRINTER MAINTENANCE | UNCLOG PROCOLORED DUAL HEAD DIRECT-TO-FILM PRINTER

23:13

DTF PRINTER MAINTENANCE | UNCLOG PROCOLORED DUAL HEAD DIRECT-TO-FILM PRINTER

Просмотров 3,9 тыс.

How To Set Up Your Dtf Printer For Success!

24:18

How To Set Up Your Dtf Printer For Success!

Просмотров 29 тыс.

SISER ROMEO FOR BEGINNERS | SETUP AND FIRST CUT

38:03

SISER ROMEO FOR BEGINNERS | SETUP AND FIRST CUT

Просмотров 12 тыс.

SUBLIMATION/DTF HACK ON DARK FABRIC : SUBLIMATION HACK ON COTTON

29:23

SUBLIMATION/DTF HACK ON DARK FABRIC : SUBLIMATION HACK ON COTTON

Просмотров 114 тыс.

30 Day Review Direct To Film Printer Epson L1800

15:57

30 Day Review Direct To Film Printer Epson L1800

Просмотров 57 тыс.

Kittl Tutorial | Getting Started with DTF Printing | Transfer Superstars

21:41

Kittl Tutorial | Getting Started with DTF Printing | Transfer Superstars

Просмотров 15 тыс.

Watch This Before You Buy a Procolored DTF Printer

12:28

Watch This Before You Buy a Procolored DTF Printer

Просмотров 140 тыс.

The TRUTH About DTF Printers and Transfers

10:22

The TRUTH About DTF Printers and Transfers

Просмотров 42 тыс.

GET HELP WITH YOUR SUBLIMATION/DTF FILM PRINTER TODAY!

30:30

GET HELP WITH YOUR SUBLIMATION/DTF FILM PRINTER TODAY!

Просмотров 8 тыс.

Beginner DTF Pro's & Con's with the DSV L1800 printer

50:08

Beginner DTF Pro's & Con's with the DSV L1800 printer

Просмотров 11 тыс.

Я в детстве с маминым дорогим шампунем:🧼

00:17

Я в детстве с маминым дорогим шампунем:🧼

Просмотров 2 млн