Join our Sales Manager, Mark, As he takes you for a walkaround of one of our small but specialist projects.
This PETRO T-Series Self Bunded Tank is configured to keep 2 x Generator Sets fully fuelled, automatically. With custom made electrical board, an array of solenoid valves, solar inverter, deep cycle battery, high & low level alarms and battery charger, this is the complete kit.
Contact PETRO Industrial for more information!
W: www.petroind.com
P: (07) 3204 9558
E: sales@petroindustrial.com.au
Facebook: / petroindustrialofficial
Instagram: / petroind
Twitter: / petroindustrial
LinkedIn: / petro-industrial-adl-p...
TRANSCRIPT:
"Ok, we’ve got a project here which is an 11,000 litre Self Bunded Fuel Tank, set up for daytank transfer.
So what we are doing is, feeding two generators.
This application is 12Volt, so we have solar power. Two solar panels down there, solar converter here, battery charger under here as backup.
Electrical control panel, so we have duty standby pumps, so our Control board is capable of automatic and manual pump control.
Here we have Pump 1 and Pump 2 selection.
Controls here to manually start and stop the pump from priming.
So stepping back through here, everything is controlled by 12Volt solenoid valves and all linked back to the electrical control board.
So what is happening, is we have pump one, pump two, we have solenoid valves on either side of the suctions to control syphoning or to avoid syphoning.
We have foot valves in the tank, we have strainers. We also have a bridging solenoid here so that either pump can operate in closed systems.
So, in the event that one pump is down, we can supply two lines.
We have set our solar panels up on top of the tank as you can see there.
We have a low level probe over here. So this probe this sensing fuel in the tank, it will shut down should the tank be on low level and set off an alarm, protect the pumps.
So this is it."
18 июн 2019
