Тёмный

Dual Mount Oil Coolers for FC RX-7 

James Wood
Подписаться 11 тыс.
Просмотров 7 тыс.
50% 1

SUBSCRIBE ► www.youtube.co...
CHECKOUT THE WEBSITE ► jameswoodracin...
In todays video I break down my new oil cooler setup. Before anyone wants to chime in and say the factory oil cooler is perfect for and nothing beats it. Wellll you're wrong. My factory cooler could not keep my temps under control. I can not take the credit for putting this setup, all the credit goes to Kevin Head of Team Brap Racing. He has been running this setup for sometime now and convinced me to give it a try. This whole setup will run you around $500 depending depending how your line and fitting choices. I am so excited to test this setup on track and see my oil temps.
Oil Coolers $70 Each www.ebay.com/i...
Oil Thermostat $180 www.improvedra...
Lines you will need 10ft
Fittings you will need five 90 degree, four straights, and two 45 degree fittings.
Patterson Car Care (affiliate) -----► pattersoncarca...
Cars For The Cure ------► www.carsforthe...
BridgeMoto -----► www.bridgemoto...
LRBspeed ------► lrbspeed.com/
SNS Parts ----► / snsmazdaparts
Head Held High Brand -------► headheldhighbra...
Fortune Auto -------► fortune-auto.com/
Elite Rotary Shop -------► eliterotarysho...
You can subscribe to my channel for new videos, builds of my RX-7, S2000, Alfie's M3, vlogs and everything else I shoot.

Опубликовано:

 

7 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 14   
@spinracing
@spinracing 3 года назад
Oil temp on a rotary controls water temp. The majority of the heat sinks in a rotary, (rotors and eccentric) hold temp, and are ONLY cooled by oil. On a stock street car.. FC cooler is fine. Once you make it breathe hard.. gotta add another or swap em out. Your setup looks great. Keep the airflow up.
@JamesWoodFCRX7
@JamesWoodFCRX7 3 года назад
Thank you! My engine wasn’t liking the 8krpm life for 45 minutes at a time. So we had to make the switch
@henryr.6259
@henryr.6259 3 года назад
So ready for this car to get back on the track, missing the sound of that triangle
@JamesWoodFCRX7
@JamesWoodFCRX7 3 года назад
Dude so am I, I need to be racing again
@henryr.6259
@henryr.6259 3 года назад
@@JamesWoodFCRX7 love to see you do tail of the dragon again, hell of a course and with the new setup, might be nice
@JamesWoodFCRX7
@JamesWoodFCRX7 3 года назад
I’ll get back there!
@BecauzRacecar
@BecauzRacecar 3 года назад
I will definitely consider at least upgrading the size cooler in mine for autoX since we do our runs all back to back to back
@JamesWoodFCRX7
@JamesWoodFCRX7 3 года назад
That would be a good investment!
@BecauzRacecar
@BecauzRacecar 2 года назад
@@JamesWoodFCRX7 how funny is it that I find myself referencing this video now that I believe my oil cooling system being the cause of my disappearing oil pressure
@JamesWoodFCRX7
@JamesWoodFCRX7 2 года назад
That is not ideal 😞😞
@Jeff-of7ku
@Jeff-of7ku 3 года назад
Was the high oil temps on your old setup that you mentioned being 225ºF with or without ducting?
@JamesWoodFCRX7
@JamesWoodFCRX7 3 года назад
Fully ducted and sealed
@dylanesposito621
@dylanesposito621 3 года назад
Do you think it would be worth it to run the stock cooler in the middle along with the two aftermarket coolers on the side?
@JamesWoodFCRX7
@JamesWoodFCRX7 3 года назад
You could do it but I don’t see the benefit. I think it could be best to remove the stock cooler and free up clean air to the rad.
Далее
FB/SA Rx7 OIL COOLERS - How To Keep COOL and Fix Leaks
13:59
Oil Cooler Install
11:02
Просмотров 2,4 тыс.
5 THINGS TO LOOK FOR WHEN BUYING A FC RX7!
12:37
Просмотров 45 тыс.
Getting To Know The FC Rx-7
4:36
Просмотров 132 тыс.
Tips For First Time Rotary Owners
5:21
Просмотров 242 тыс.