´¿ Thank you, the DDR6 video card worked for me in the other PCI-E since it is only 1 processor turned off several times. I wanted to ask him where he got the bios file and how do I use the programmer, the processor I have is ES-2620v4 2.1 GHZ you can with that ? Thank you
I have the same dual CPUs but with ASRock EP2C612 WS. I must say your R15 score is higher than mine because of 2 reasons: I haven't changed the BIOS for allcore turbo clocking, 2- I am running it from a remote desktop setting. Otherwise it is a beast. I think I will enjoy it for a while. My motherboard takes max RAM speed 2133mhz sadly (128gb). What about your RAM ?
Hi there ¿ The z10pa-d8 board to put an 8 gig rx 5500 video card apart from the 24-pin power connector of the board that works like this, when I go to connect the video card I connect the 8-pin 12 Volt A and B or not And I also turn off the jumper on the VGA board so that the card works for me.? Thank you
Please make a video how to Unlock this Motherboard Z10pa! Please help. Thank you! After searching a lot I can't see any thread any topic make tutorial about this mainboard and X99 Supermicro. Thank you!
@@CMM-hn8yr Hello Sir! Can I have a contact with u please. Just do the same mod bios like this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-n70kVysFM3E.html and then use AFUDOS 3.05.04 this version to restore bios right? Thanks sir again.
@@CMM-hn8yr Hi Sir! Sorry for bothering u! Can u please teach me how to mod this mainboard bios? Thanks. I can't find a fully thread how to mod. Thanks again.
Godt at se det performer! Har lige købt Dual Xeon E5 2690 v3 selv til at bygge et homelab til bioinformatik. Havde bestilt nogle E7'er indtil jeg opdagede at man ikke kunne få standalone motherboard til dem :-(
Fedt 😄 det er en super god platform👍 Jeg har også selv kigget på E7, men samme problem med motherboards. Derudover er der ofte højere frekvens på E5 platformen så man også kan bruge computeren til mere single core afhængige ting👍
i made it myself. with uefitool to remove microcode. you need v3x2 with minus 80mv vcore aswell. I would only do it after extencive research online. also you NEED the eprom burner to do this.
